Used other metal cutting saws for sale (104)

Year of construction: 2020, operating hours: 160 h, condition: used, functionality: fully functional, empty load weight: 28,500 kg, fuel type: electric, total length: 5,850 mm, lifting height: 11,600 mm, mast type: simplex, construction height: 2,200 mm, drive type: Elektro, load capacity: 25,000 kg, construction width: 2,150 mm, Other Mast type: Standard Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Ncsdpfjzf Sd Nsx Alheu Description: Chassis with 6 wheels, non-marking front axle, drive with counter-rotating movement, 3-part proportionally extendable hydraulic boom (main boom + 2 hydraulic extensions) - boom angle +60° / -7° - mechanical operator cab, 3 removable counterweights with automatic adjustment of lifting capacity, cabin, battery 96 V - 1,125 Ah with water filling system, integrated battery charger on board, radio remote control for all crane and boom movements (2 batteries available and charged via power grid and crane), warning light, strobe, acoustic warning system for the machine in motion, fire extinguisher, LMI (Load Moment Indicator) and overload protection system according to EC directives with light warning (green/yellow/red), declarations of conformity/CE marking, radio remote control, hose reel, camera, mechanical jib 15t@1.2, also usable with winch, forks 12T@0.8m.

Year of construction: 2019, operating hours: 210 h, condition: used, functionality: fully functional, empty load weight: 20,200 kg, fuel type: electric, total length: 5,400 mm, lifting height: 13,000 mm, mast type: simplex, construction height: 2,000 mm, drive type: Elektro, load capacity: 16,000 kg, construction width: 2,070 mm, Other Mast type: Standard Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Nsdpfx Alszf Sd Ashecu Description: Hydraulically adjustable boom + 60°/-9°, Non-marking tires with tread, Charger internally installed, Battery with water filling system, Mobile head (new mobile head), Radio remote control for all crane movements, 2 cameras (front right and rear center), Distributed counterweights (removable with pallet truck), Aluminum protective boom tip 11 t, Aluminum boom extensions 7 t, Operator cabin with door, Warning light, Fire extinguisher

Year of construction: 2014, condition: used, functionality: fully functional, empty load weight: 360 kg, total length: 2,200 mm, construction height: 400 mm, drive type: Keine, construction width: 1,200 mm, Other Condition: Like new Nsdpfszcipxex Alhocu Technical condition: very good Description: OST STEIRER hydraulic tipping body – year of manufacture 2016/9 – very good condition – original paint – dimensions: 2.20m x 1.20m x 0.40m – excluding VAT.

Year of construction: 2009, condition: ready for operation (used), overall weight: 2,500 kg, total width: 2,210 mm, total height: 2,400 mm, product length (max.): 3,110 mm, Metal Band Saw manufactured in 2009. This BAUER SA 430 ZA features a cutting capacity of 430 mm and includes a hydraulic material clamping system for efficient operation. It is equipped with a touchscreen control for preselection of cutting pressure and force, ensuring precision in cutting tasks. If you are looking to get high-quality cutting capabilities, consider the BAUER SA 430 ZA machine we have for sale. Contact us for further details. • CE Marked • Voltage: 400 V • Control Voltage: 24 V • Frequency: 50 Hz • Motor Power: 4 kW • Rated Current: 11.5 A • Fuse Protection: 13 A • Coolant Pump Ncsdezcwgrjpfx Alheu • Hydraulic Pump • Cutting Capacity: 430 mm • Saw Blade Dimensions: 5200 x 43 x 1.3 mm • Infinitely Variable Cutting Speed • Saw Blade Guidance: Guide Rollers and Carbide Guides • Hydraulic Material Clamping • Hydraulic Saw Frame Feed with Cutting Pressure Control • Manual Material Feed • Hydraulic Vice Feed System • Touchscreen Control for Preselection of Cutting Pressure and Cutting Force • Rapid Downfeed • Parts Collection Tray • More Than 5 Saw Blades Included • Saw Blade Type: SIGMA • Saw Blade Length: 5200 mm • Saw Blade Width: 43 mm • Saw Blade Thickness: 1.3 mm • Ready for Immediate Operation • Roller Conveyor optional, not included • Chip Conveyor optional, not included

Year of construction: 2015, condition: ready for operation (used), A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible. Nedpfxozf Ncps Alhocu

Condition: used, CIRCULAR SAW WITH AUTOFEED Technical characteristics: DIAMETER DISK 380 mms Comments: MAGGOT in GERMANY Njdpfx Als Dv Raehocu

Condition: used, Technical characteristics: *HYDRAULIC AUTOFEED *DISC DIAMETER 500 mms Ncjdpo Dv Rcsfx Alhsu Comments: *MADE IN GERMANY

Condition: used, TECHNICAL DETAILS - Machine floor space : 1700x1200 [mm] - Machine height : 1500 [mm] - Machine weight : 880 [kg] Nedpsxb Enmofx Alhocu

Condition: used, TECHNICAL DETAILS - Machine floor space : 1700x1200 [mm] Ncodpfxsxb Engj Alhsu - Machine height : 1500 [mm] - Machine weight : 880 [kg] - Wheel diameter : up to 250 [mm] - Wheel thickness : approximately 0.2 to 1 [mm] - Machinable diameter : up to 30 [mm] - Cutting length : from 0.5 to 400 [mm]

Condition: used, TECHNICAL DETAILS Nodpfx Ajuhaaislhjcu - As per photos

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: • Structural steel processing • Steel frames fabrication • Agricultural manufacture • Steel tube bending • Retail steel sales Ncedsf Dqp Eopfx Alhsu Can be used with all your existing saws including: • Band saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 10 m Stroke: 9560 mm Pushing capacity: 120-400 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 1987, condition: ready for operation (used), Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment. Ncedpfjzfp Hnjx Alhju

Year of construction: 2004, condition: used, Technical details: Nodpfeu Nit Rjx Alhecu Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm Ncodpfx Alju Niuzshju cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Make: Honeywell BraukmannType: R 295 SAType of installation: 2 Ncjdpfx Alodc A R Rohju

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Technical Specifications Njdpezcfdxsfx Alhecu Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Maximum cutting height: 125 mm Movable support turret Dimensions Length: 800 mm Width: 700 mm Height: 1,225 mm Weight: 150 kg

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Njdpfotwn E Uex Alhocu Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 MACHINE NO.: 3297 YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Nedpjy S Sxcofx Alhecu Condition: good, functional

Year of construction: 2021, condition: used, functionality: fully functional, total length: 3,900 mm, lifting height: 5,600 mm, construction height: 1,920 mm, construction width: 1,840 mm, Other Njdpfxoyafdge Alhjcu Technical Condition: New

Year of construction: 2024, condition: used, empty load weight: 4,500 kg, total length: 9,219 mm, construction height: 955 mm, Other Speed class: 96 Battery condition: New Ncjdpovdg Iwsfx Alhju

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, empty load weight: 1,800 kg, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Ncedpfoumvb Iox Alhou Condition (Technical): New Description: The CAT DE110E2 is an emergency power generator for construction sites, industry, and events. With its economical diesel engine and robust design, this generator is ideally suited for providing power during power outages and for mobile and continuous use. Durable, versatile, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this device, we also offer aerial work platforms and telescopic loaders for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 2022, functionality: fully functional, fuel type: diesel, total length: 2,650 mm, construction height: 1,450 mm, drive type: Diesel, construction width: 950 mm, Other Technical condition: New Battery condition: New Njdoumu Utopfx Alhscu Description: The MYGEN MY110P is a powerful emergency generator for construction sites, industry, events, and power outages. With its fuel-efficient diesel engine, robust design, and ease of operation, this generator is ideal for mobile and continuous use, even under demanding conditions. Durable design. Fuel-efficient diesel engine. Flexible applications. Easy to operate. For more information and a non-binding inquiry, please visit our website. Safe working at any height. In addition to this device, we offer other aerial work platforms and telescopic handlers for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from one source. Lease purchase, financing, and the purchase of used machinery are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, empty load weight: 5,400 kg, lifting height: 2,490 mm, Year of construction: 2014, operating hours: 2,081 h, total length: 5,550 mm, construction height: 2,500 mm, drive type: Diesel Motor, construction width: 1,950 mm, Other Speed class: 25 Technical condition: normal Battery condition: normal Nedpfx Aljwlxgaehocu

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILSTAHL SÄGE-BOHRMASCHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill line combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drill line. This drilling saw line is ideally suited for economical sawing, drilling, center punching, marking (scribing) and thread cutting of profiles and flat steel bars in steel construction and the steel trade. The Kaltenbach KDX-S drilling machine is equipped with 3 drilling units, each with 26 kW drive power and 5 tool changers. The Kaltenbach M150 length measuring device (measuring carriage) together with the T13 transport system is designed for profile lengths of up to 18 m. The comprehensive transport system for the material transport of sectional steel also has cross tractors at the infeed and outfeed for the cross transport of the sections. The CNC control together with the Kaltenbach Profiline III software enables data processing in DSTV and DXF format. Ncedjymy Imjpfx Alheu The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, giving the operator a good overview. A gripper downstream of the saw is used to remove and eject the first cut or transport the profile to the outfeed area. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw drill line combination consists of: Kaltenbach KDX-S 1015 PROFILE DRILLING SYSTEM CUTTING BAND SAW MACHINE Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Year of construction: 2009, condition: used, machine/vehicle number: 0301-230036, Kaltenbach drill saw system as a combination for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched and sawn to length in a single operation. Rolled profiles such as double T-steel, T-steel, U-steel, angle steel, hollow profiles and flat steel are processed here. The Kaltenbach drilling unit has an automatic tool changing device on three drilling spindles for five tool sizes each. The tools are positioned with high precision using ball screws and servomotors. The entire system is equipped with a length measuring device. Technical information KDXS 1215 drilling machine: - Working area min. 80 x 65 x 10 mm - Working area max. 1200 x 450 mm - 3 drilling units (vertical Y-axis, horizontal Z- and W-axis) each 11.0 kW frequency-controlled: 33.0 kW - Automatic tool changer (3x5) Nodpfx Aorr Sq Nelhecu - Frequency-controlled drive power 78 kW - Working height 640 mm - Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) - CNC control with Profiline 3 software Kaltenbach HDM 1432 High-performance circular saw as vertical saw with swivel bearing for high sawing performance of medium and heavy steel profiles, working area at 90° saw cut: 1200 x 450 mm, mitre adjustment for mitre cuts of -45°/90°/+35°, this circular saw system is equipped with a segment saw blade diameter 1430 mm. High cutting performance thanks to powerful drive NC-controlled cutting angle adjustment Feed via ball screw for ideal cutting results and short idle times