Hydr. high speed hacksaw Hacksaw machine

KASTO HBS 210-240

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Iodpfouqgbtox Alxsif Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Iedpfx Aswr Dxhelxjif

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad Iiodpfeupxdqsx Alxef connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp Iiedpfx Aeuhbr Telxef

Year of construction: 2000, condition: good (used), Pressing force 28 t Isdpfx Alji Eld Ujxjif X-axis 2000 mm Y-axis 1000 mm Machine weight approx. 11000 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge Iijdpfoxabc Rox Alxof * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 Iodpfx Aeyw H Szjlxoif - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,743 h, controller manufacturer: HEIDENHAIN, controller model: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle operating time: 5.743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • tool clamping system HSK 63 Iedpfx Aox Imtyolxsif • Key features: • Versatile applications: precise machining of a wide range of materials • High-performance spindle for fast, precise machining • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated features for automated tool and workpiece changes • Efficient cooling system for optimized performance and tool life • Application: Ideal for tool and mold making and the production of high-precision components across various industries Additional equipment • m&h 3D probe • Vise: not included

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories Iiedpfx Aoilp Euslxef MARCELS MASCHINEN AG

Condition: used, Year of construction: 2009, Technical details: turning diameter: 270 -300 mm turning length: 710 mm total power requirement: 43 kW Iedpfxsw Dud Es Alxeif weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools – the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one. *