Rotary table grinding machine

KEHREN RS 7C

Condition: not inspected (used), Face plate diameter: 3000 mm Turning diameter without side support: 3500 mm Turning diameter with side support: 3300 mm Turning height under tool: 2560 mm Max. workpiece height: 2750 mm Kdjdpfx Ajvyy Txeadow Ram stroke vertical: 1500 mm Ram stroke horizontal: 1800 mm Travel distance of side support: 2320 mm Traverse travel: 2100 mm Max. workpiece weight: 20 tons Total weight: approx. 75 tons

Condition: used, Year of construction: 2008, Fuchs – Terex MHL 340 Year of manufacture 2008 Hydraulic cabin (driver’s visibility height 5 m) 6 cylinder Deutz BF6M 2012C- 114 kW Central lubrication system Kdjdpjvyf Injfx Aadsw Tires 10.00-20 Boom 12.5m (6.6 m + 5.3 m) 4-way outrigger support Grapple Fuchs 600 liter Transport length 10.2 m Transport height 3.36 m Transport width 2.75 m Operating weight 25 t

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible. Kedpfxevxvfhs Aadsdw

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Kedjudb R Ispfx Aadjdw Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Ksdpfet Hw Susx Aadsdw Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Kedpfxew Ett Ij Aadedw Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: excellent (used), Year of construction: 2006, 5-axis CNC machining center 2006 Control: Heidenhain iTNC 530 Technical data: x-axis travel 880 mm y-axis travel 630 mm z-axis travel 630 mm Kdedewn A Slepfx Aadew Max. torque 130 Nm tool holder SK 40 (ISO 7388IIB) swiveling B: 103° Work table: Clamping surface 1,250 x 700 mm Rotary table diameter 700 mm rotatable C: 360 ° Max. table load approx. 500 kg T-slots 11x 14mm x 63mm Tool magazine: Number of tool places 32 (2x 16) pos. tool holder SK 40 (ISO 7388IIB) Max. tool diameter 80 / 130 mm Max. tool diameter with free neighbor box 160 mm Max. tool length 315 mm Max. tool weight 8.0 kg

Year of construction: 1990, condition: excellent (used), Equipment The machine can be upgraded with new software and control system according to customer requirements. Measuring range X = 850 mm Kodpfx Ajff Eakjadedw Y = 1200 mm Z = 600 mm Measurement accuracy 2,5µ + L/250 Price: on request! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm feed 5 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 capacity 30 degrees: flat 170 x 335 15 - 150 m/min workpiece weight max. 250 kg/m kg 3,0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Kodpfxoulnb De Aadsdw Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. Kdodetvdcyjpfx Aadew The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.