KEYENCE IM-7030T

KEYENCE IM-7030T

Year of construction: 2018, condition: ready for operation (used), Media Power consumption 430 VA Cjdpfx Afjx D E Npo Ajhc This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. Application Types Measuring

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020 Chsdey Rxtkepfx Af Asc

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Cedpjvz Snkjfx Af Aehc Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 Chedpfjw T Tlrex Af Asc X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: used, Field of view on the objective lens at 50x: 11.2 x 9.2 mm Field of view on the objective lens at 100x: 5.6 x 4.6 mm Codpfxob Nxl Io Af Aehc Projection area: 560 x 460 mm Objective table size: 230 x 165 mm Diameter of the glass table: 80 mm Approximate weight: 230 kg Space requirement: 1030 x 780 x 1800 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16K016032, turning diameter over cross slide: 380 mm, turning length: 500 mm, turning diameter: 380 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 18,500 W, rotational speed (max.): 5,000 rpm, turning diameter over bed slide: 380 mm, overall weight: 5,200 kg, bar passage: 65 mm, chuck outer diameter: 305 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, We are offering a used CNC lathe SMEC SL2500BM, year 2016, in very good working condition. The machine has been regularly maintained and is ready for immediate operation. Chsdpfoyxccfex Af Asc Key specifications: Max. turning diameter: approx. 380 mm Max. turning length: approx. 500 mm Spindle bore: 65 mm Turret: 12 stations Live tooling (BMT65) – suitable for complex machining CNC control: FANUC 0iT Rigid and stable construction

Year of construction: 2017, condition: excellent (used), Alicona InfiniteFocusXL200 G5 Measuring System Positioning Volume: 200 mm × 200 mm × 200 mm Csdpfx Afsx Dxw To Aehc Maximum Workpiece Weight: 30 kg Objective Magnifications: 2.5x, 5x, 10xHX, 10x, 20xHX, 20x, 50x, 100x Numerical Aperture: 0.075–0.8 Working Distance: 4.5–37 mm Lateral Measuring Range: 5.63 mm to 0.16 mm Vertical Resolution: 2300 nm to 10 nm Measurement Noise: 800 nm to 1 nm Vertical Measuring Range: 8–36 mm Measuring Speed: up to 1.7 million measurement points/s Minimum Measurable Roughness Ra: 7 µm to 0.03 µm Minimum Measurable Roughness Sa: 3.5 µm to 0.015 µm Minimum Measurable Height: 2.3 µm to 0.01 µm Maximum Measurable Area: up to 40,000 mm² Flatness Accuracy: 0.1 µm (10x objective) No guarantee is given for the correctness, completeness, or up-to-dateness of the information.

Condition: used, Year of construction: 2014, Technical details: Chjdpfoxrwpdox Af Asc x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm b-axis: 360.000 x 0.001 ° spindle drive: 26 / 18,5 (40% / 100%) kW spindle turning speed range: 50 - 15000 U/min Tool bore: KSK-A63 max. table loading capacity: 500 kg total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Chodpfxezn Iucs Af Aoc Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Cedpfx Aouwv Idsf Aohc Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)