Center lathe

Knuth Turnado 230 x 1500

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Main Drive Bedpex D Ikpefx Ak Dedf Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm Bdjdsyh Ndwjpfx Ak Dsf distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 75,07,50,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Bjdpfxjic Rl Do Ak Dodf The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing the surfaces of metal, stone, and concrete. Delivery to Germany/Austria. As a service provider in the field of surface treatment, we can offer you machines that meet your needs! Transportation costs: depend on your location and delivery conditions. Delivery: 4 weeks of working days after payment receipt by air freight. - Air freight: approximately 2 weeks. The equipment is NEW and is configured and adjusted according to customer requirements! The configuration and price depend on the customer's requirements and application area. We offer professional training in the use of the equipment in accordance with UAVA/UVV standards in Austria and Germany. As we are a service provider and work with the equipment, we can also guarantee that it functions properly. We offer comprehensive on-site training or in workshops/customer-oriented demonstrations. Payment: LEASING / FINANCING / PURCHASE Technical parameters: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser length: 1064nm or 1080nm ±5 Frequency: 10-50KHz Air or water cooling Net weight: approx. 170kg Bedpfstxlyrsx Ak Dedf Size: 98 * 122 * 143 cm Scan width: 5-50 cm Functions: Handheld or automatic Operating temperature: 0-40°C Operating mode: CW Wavelength Nm: 1025-1070 Standard output power: 15KW Laser beam quality mm*mrad: 4 Adjustable frequency Hz: 400 to 50000 Diameter of transmission fiber: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature °C: 5~35 GUARANTEED at the BEST PRICE!!! - RENT / LEASE / PURCHASE All equipment is exclusively assembled and delivered according to your requirements and our experience. - Demonstration - 24-hour support - Incl. maintenance & service & repair We also offer the following with the equipment: INDIVIDUAL training according to the UAVA/UVA safety regulations for the operation of laser machines for surface treatment. Safety-related consulting according to occupational/safety regulations for the use of laser equipment. Regular inspection of the safety regulations according to the applicable regulations.

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Bjdpjmw Ukcjfx Ak Dedf Dimensions: 150x85x155 cm LxWxH

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. Bdedpfxjymznhs Ak Dof For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Bedpswtg H Rjfx Ak Djdf

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm Bsdpfx Aksv Tpxqs Dodf -Weight: 3900 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: Bedpfx Akozbh U Ds Dodf • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg Bodpfou Idhyex Ak Dedf dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *