Pillar Drilling Machine

Strands S 25

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment Lodpop Rai Eofx Af Seai

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Lajdpfx Aemrnk Esf Sei *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 spindle stroke 600 mm Laedjgvkkzepfx Af Ssi positioning speed in allen Achsen 1 - 10.00 mm/min positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Control Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA

Condition: new, WMD45A ROGI Drill Cutter VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout brand SINO * Automatic longitudinal feed worktable * Drill head with ISO30-B16 shank * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * LED work light Ledpfx Aoga Tyzef Soai * Cooling system * Tap function * Digital depth stop * Milling head motorized height adjustable * Various tools in suitcase

Condition: used, Year of construction: 1976, machine/vehicle number: 5591, bore capacity in steel (diameter):13 mm throat:185 mm bore stroke:70 mm taper MK:Bohrfutter 1 - 13 mm turning speed range:400 - 4000 U/min speed steps work spindle:6 table surface area:200 x 250 mm Lasdpjcxxvbofx Af Soi distance spindle /table:170 mm column diameter:65 mm total power requirement:0,22 kW weight of the machine ca.:0,08 t dimensions of the machine ca.:0,75 x 0,3 x 0,65 m

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Laodpfxswtnxno Af Ssi Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: Lsdef Eywwspfx Af Seai -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Lajdpfx Afsfd Raas Sei Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, roll diameter:500 mm throat:1050 mm workpiece height:400 mm volt:400 V table-size:750 x 800 mm total power requirement:5,5 kW Lsdpfjcxxr Esx Af Soai weight of the machine ca.:1,5 t dimensions of the machine ca.:2,4 x 1,0 x 2,2 m stable cast stand construction, cutting speed adjustable via manual gearbox and variator, band tensioning device, tilting work table +/-40°, rear add. table, various saw band guides, grinding device, work light, foot pedal

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Ljdpj Nh Hxjfx Af Ssai Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.