Conveying device

Koch-Technik Fördergeräte

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Djdpfx Aowv Hnmjp Doku Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Dedju E El Ispfx Ap Djku Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Dsdpek Rnq Nofx Ap Deku Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Dkedoxfka Nepfx Ap Dsu Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: excellent (used), Year of construction: 2004, Conveying and dosing equipment Brand: A. Tschritter Type: WC 100 Year of manufacture: 2004 Dkodpfed Twgcox Ap Deu

Condition: good (used), Year of construction: 1992, Fanuc Fanuc automatic press AC 100 Closing force: 100 tons Dkedpfsh R Npxsx Ap Dsu Year of manufacture: 1992

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Dkodpjzzknxofx Ap Dju Coolant and air supply from outside

Condition: as good as new (ex-display), Year of construction: 2023, total length: 3,400 mm, total width: 1,300 mm, total height: 820 mm, overall weight: 565 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Dsdpfx Apjw N Imij Doku The ASCO CB 3000 Conveyor Belt is a robust, 3-meter transport solution for construction, recycling, horticulture, and industrial applications. Perfect for moving sand, soil, gravel, compost, and other bulk materials, it delivers reliable, efficient, and continuous material handling. This particular unit was used only for demonstration purposes, showcasing its functionality and excellent condition. Key Features: • Adjustable belt speed, angle, and length for versatile use • Modular and extendable design for longer transport distances • Integrated hour counter for maintenance tracking • Simple belt tension and height adjustment • Durable, low-maintenance build for continuous operation Tech Highlights: Speed 10 - 135 cm/s · Capacity 20 - 120 m³/h · Belt width 0.6 m · Hopper length 0.8 - 1.6 m · Hopper capacity 0.2 - 0.5 m³ · Drive power 400 V / 2.2 kW · Weight 565 kg · Width 1.3 m · Length 3.4 m · Height 0.82 m

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Djdevl Skaopfx Ap Djku Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h Dsdpfjywzv Ijx Ap Doku weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted