Dryer dry-air MOTAN (art.2274)

Motan LBA400

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04032026/040036S, High-performance drying system consisting of the LUXOR 400 dry air generator and two insulated LBA 300-H drying hoppers (300 liters each). Designed for continuous operation in large-scale plastic processing facilities, this setup ensures precise drying of hygroscopic granules with high throughput and consistent dew point control. The system features a dual-bed desiccant regeneration cycle, ensuring uninterrupted drying. Combined with air-to-air heat exchangers, it delivers energy-efficient performance. The LUXOR 400 supports multi-hopper management, allowing precise control and independent settings for each drying bin. Ideal for demanding industrial applications where energy efficiency, process reliability, and material quality are critical. _____ Technical Specifications: Dryer: MOTAN LUXOR 400 • Dry air flow rate: up to approx. 400 m³/h • Regeneration system: dual-bed with automatic switching • Heater power: approx. 22 kW • Power supply: 3/N/PE 400 V, 50 Hz • Control system: advanced operator panel (OP7 / LOGO! / PLC depending on config) • Year of manufacture: 2004 • Weight: approx. 400–450 kg (without hoppers) Drying hoppers: 2x MOTAN LBA 300-H • Volume (each): 300 liters • Heater power (each): 4.5 kW • Voltage: 3/PE 400 V • Integrated air-to-air heat exchangers for energy-efficient operation • Insulated stainless steel construction • Return air connections to main dry air generator • Total system capacity: 600 liters Gusdew Dpuropfx Aa Ssa _____ Key Features: • Continuous operation with low dew point • Energy-efficient due to integrated heat recovery • Suitable for large-volume material drying • Compatible with multi-shift and automated production • Optional integration with conveying and recipe management systems

Year of construction: 2022, condition: like new (used), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 RAFFRED. GMP150+2xPTUN2000 COOLING SYSTEM As good as new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following parts. - Hopper. - Holding frame. - Heating chamber. - Connection lines. - Air control valves. Gjdpfxjvhb S Ss Aa Sjua

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! Gjdpfjud N Hdsx Aa Seua As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible. Godpevcpz Rjfx Aa Ssua

Year of construction: 2000, condition: excellent (used), Neuman und Esser ICM 48/60 Classifier Mill, only the grinder without accessories, good condition. Additional we have a ICM 8 and a big ICM 1000 for sale Gusdpfx Aaeh Ugwys Soa

Year of construction: 2017, condition: ready for operation (used), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible. Gjdpfx Aowty Hkoa Sjua

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Gsdjwm Ii Tspfx Aa Ssua Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Gjdpfxswhxiae Aa Seua Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Guedpfoh Akm Tsx Aa Sea

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-109101 / Schaltschrank: 6700-101707, overall weight: 550 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 M2004, input voltage: 400 V, input current: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of construction 09.2017. Gsdpfx Aoucx Hdoa Soua Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Control cabinet: ABB IRC5 M2004. Year of construction: 11.2014 Used, complete, very good condition, tested and can be demonstrated. (See type plates for further details). We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.