Gear Hobbing Machine - Horizontal

KOEPFER 170

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm Iedpfx Aeizlh Hsb Isa swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Isdpot Hwxzofx Ab Iea Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 Ijdpfx Abet Hwwqe Iea min. module total power requirement 10 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm Isdpfx Abjt Hwu Ae Isa max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2010, Make: MAZAK Type of machine: Variaxis 630-5X Year of manufacture: 2010 Control system: Mazatrol Matrix Machine's weight: 17.000 kg Iodpfxexk Uvxe Ab Isa Tool holder: HSK 63A x-travel: 630 mm y-travel: 765 mm z-travel: 600 mm Speed range: 12.000 U/min max. Table load: 500 kg Overall dimensions: 3.239 × 2.495 × 4.350 mm Table dimensions: Ø ca. 630 mm Number of tools in the magazine: 80 Plätze Internal coolant supply: 40 bar

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, A used, overhauled Niles ZSTZ 630 C3P. Max. gear diameter: 630 mm Gear width: 215 mm Max. module: 12 Iodsxaptkepfx Ab Iea Min. module: 1 Stroke length: 225 mm Table diameter: 500 mm

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Isdpfx Abeqt Dmye Iea Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, HWACHEON HVT2025M (C-axis) / Model 2012 Table diameter (mm): Ø2,000 Maximum swing over bed (mm): Ø2,650 Maximum turning diameter (mm): Ø2,500 Maximum cutting height (mm): 1,100 Iodpfx Abexb N U Ro Isa Number of tools (pcs): 14 (7 turning, 7 milling) Fanuc 31i 2,797 hours (operating time)

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady # with crowning device # Iodpfx Ajwzmp Usb Isa in excellent working condition

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW Isdpfx Abst Tqgxj Iea weight of the machine ca. 4,5 t