Double column press / Straight side press

Komatsu E2G 400

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Cjdpfx Aswnpavsiljha Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration without cushion

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. type: NEF 400 serial number: 01620009641 year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Csdpfjy Iuvcsx Ailoha Bar diameter: 66 mm Hydraulic tailstock 12-position turret With chip conveyor Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling Csdpfow S Efzex Ailjha The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Chedpfjyxn H Nox Ailsa

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Csdpfx Aon Awd Reileha Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: used, Year of construction: 2014, Technical details: max. wheel diameter: 150 mm gear width: 350 mm max. module: 4 Chjdpfx Aioxtbmiolea total power requirement: 48 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 4,88 x 4,40 x 3,56 m spindle turning speed range: 100-1000 U/min Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. *

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale Chedpfxsucdgpe Ailja 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left Cedpfxoxaa Urs Aileha - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc Cedpfx Asy Sblreileha x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad Codey Hl Hispfx Aileha gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no