KM 125-620 C1

KRAUSS-MAFFEI

Condition: excellent (used), Year of construction: 2011, Year of construction: 2011, Arm range: 1717 mm, weight: 20 kg, Control unit: DX100 Lsdpotxymmsfx Adworg

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Lrodpeuiykdsfx Adwjg

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, screw diameter: 45 mm, This Krauss Maffei KME 45 XS was manufactured in 2016. It features a 45 mm screw diameter, high-performance single screw with a 36:1 L/D ratio, and operates at speeds up to 600 rpm. Designed for high-pressure extrusion, it handles thermoplastics and compounds with a throughput of 150-300 kg/h. Consider the opportunity to buy this Krauss Maffei KME 45 XS single screw extruder. Contact us for more information about this machine. • Extruder type: Single-screw • L/D ratio: approx. 36:1 (XS = high-performance series) • Screw speed: up to approx. 600 rpm Ljdsycvftjpfx Adwjrg • Drive: AC motor with frequency control; high-torque design for compounding • Throughput: approx. 150–300 kg/h (depending on material and screw configuration) • Operating pressure: High-pressure extrusion capable • Material types: Thermoplastics, compounds, masterbatch

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: Screw diameter: 80 mm Injection weight: 1464 g Injection pressure: 1855 bar Dosage volume: 1608 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 920x830 mm Lsdpfx Adsycth Sewsrg Platen size: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. mould height: 400/900 mm Air valves x 4 Hydraulic core pull x 4 Hot runner control system x 36 Self-closing nozzle x 10 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Automatic upper tie bar withdrawal function Machine has been regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 Robot Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58x2.73x2.32 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the selected machine's technical testing or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, Injection moulding machine With two components Kraussmaffei Mutliinject KM200-1000-390 CZ Year 1998 Closing 200 TO Scrow 60 mm- 566g Scrow2 - 35 mm - 178 g Tie bars wide 560x560 Lredpfx Adsfx Tztjwsg

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Lrodpfx Aoycthredwsg Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 678 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Ljdpfx Adjycthloworg Very good technical condition Operating hours: approx. 8,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum sensor x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Hot runner control, 10 zones Injection unit hardened - bimetallic Energy-efficient machine – fitted with a system of 3 variable-output hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 robot Year of manufacture: 2019 4-axis robot: 3 axes powered by electric servo motors; C axis - pneumatic Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started by our service technicians before sale. A video of the technical tests for the selected machine can be provided, or you can attend technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Lrodpfswcb Nrsx Adwog Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX PolySet Year of manufacture: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Ledoycthfepfx Adworg Injection pressure: 2500 bar Dosing volume: 251 cc Clamping unit: Clamping force: 130 t Type distance: 470 x 470 mm Clamping platen size: 745 x 770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core puller x 1 Air core puller x 6 Control system with hot runners x 18 Injection unit hardened - bimetal Proportional valve on the injection unit for precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90 x 1.60 x 2.10 m All machines offered are tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Lsdpfsyctghjx Adwsrg Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2000, operating hours: 77,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, Type: KM 200-700 C2 (CLEAN ROOM) Year: 2000 Screw ø: 50 mm Operating hours: 77,000 h With accumulator Euromap 12 Injection pressure: 1,892 bar Lrjdjwm Ifnopfx Adwsg Island distance: 560 x 560 mm Molding table size: 915 x 915 mm Min tool: 350 mm Opening path: 700 mm Daylight: 1,050 mm

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Ljdjycqz Aepfx Adwerg Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Lredpeycqziofx Adweg Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Lsdpfx Aoxtmp Nedwjrg

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350/1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clearance between tie bars (H x V): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating zones: 6 Dry cycle time: 1,550 1/h Oil tank capacity: 720 liters Dimensions and weights: Lrodpfx Ajxu Uvasdwjg Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mold weight: 4,780 kg Injection unit: - Work capacity: 1900 - Screw diameter: 70 mm - Injection pressure: 1,778 bar - Shot volume: 1,047 cm³ - Shot weight for PS: 953 g - Injection flow rate: 527 cm³/s Screw speed standard / option: 285/349 rpm Screw torque standard or Stage 1: 95 PS Screw torque option or Stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT color display and 3.5-inch floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing system in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm