Platform

Krone SDP 27 Mega Edscha Lift BPW

Condition: used, Year of construction: 2010, x-travel 600 mm Ncedpfoxq Hk Iox Afasn y-travel 770 mm z-travel 675 mm Control Heidenhain iTNC 530 table surface area 400 x 400 mm spindle tunring speed 16.000 U/min tool taper HSK A 63 number of tool places 40 Pos. auto power on hours ca. 78.500 h spindle hours ca. 18.075 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - put into operation in 2012 - Internal cooling system - Renishaw 3D probe - Dual pallet changer - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,150 h, functionality: fully functional, machine/vehicle number: 30017409, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece weight (max.): 600 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Simultaneous Milling Machine Hedelius RS80 S with Heidenhain I TNC 530 Operating Hours Program Run: 25,130 hours (still in operation) Nodswl Dy Ejpfx Afascn Spindle: 300 hours Speed Range: 30 – 8,000 rpm Power (approx.): 25 kW Torque (approx.): 244 Nm Internal Coolant Supply (IKZ): 25–70 bar Tool Holder: SK 40 DIN 69871 AD Tool Magazine: 30+190 additional stations Encapsulated Heidenhain Linear Measuring System: Direct in X/Y/Z/A/C Travel Range (XYZ): 800 / 800 / 600 mm Rapid Traverse X/Y/Z: 40 m/min NC-Swivel Rotary Table: A-axis: +95° / -95° C-axis: 360° Clamping Surface: ø800 x 630 mm Table Load (max.): 600 kg Equipment/Accessories: Chip conveyor Slant-bed coolant system SKM 1250 L High-pressure coolant pump IKZ 70 bar Rinsing pistols Hydraulic clamping/release on the table via M command, 2 units Workpiece touch probe: Infrared probe M&H Blum laser tool measurement and system for diameter and length Full enclosure work area hood with shutter 2 electrostatic air filters LTA type AC 1000 Internal cleaning system Automatic door interface for automation Setup mode: Electronic handwheel Heidenhain 410 Under power for inspection

Condition: used, Year of construction: 2014, x-travel 600 mm Ncodox Ik Tqjpfx Afasn y-travel 770 mm z-travel 805 mm Control Heidenhain iTNC 530 spindle tunring speed 16.000 U/min spindle drive 25/32 kW torque 159/206 Nm tool taper HSK-A 63 number of tool places 40 Pos. size of pallet 400 x 400 mm numbers of pallets 2 auto power on hours ca. 38.013 spindle hours ca. 17.871 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Interchangeable inserts - Chip conveyor - Internal coolant system - Tool cleaning system - Tool length measuring device - Laser measuring system for tool monitoring, Blum - Compressed air supply through the spindle center - Cleaning gun - Blow gun - Electronic handwheel, Heidenhain HR 520 - Decentralized work area extraction, 800 m³/h Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement Ncedpfx Afox D Dx Asaon • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,035 h, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Dose D51 is a 2020 model with 1,035 operating hours. It has undergone a comprehensive overhaul by us, during which every component was cleaned and function-tested. The Kärcher B40 W features a stepless drive system, which greatly facilitates working with the machine. The intuitive operation eliminates the need for lengthy user training. Nodpfx Afex Tf H Ajascn It is equipped with a detergent dosing system that ensures the cleaning process always receives the precise amount of chemical required. New, maintenance-free gel batteries have been installed, which can be conveniently recharged via the integrated charger. The squeegee was sandblasted, newly powder coated, and fitted with new suction lips in our workshop. A new brush is included in the scope of delivery. The Kärcher B40 W Dose D51 is ideally suited for daily cleaning tasks, such as in workshops, warehouses, or retail stores. Technical data: - Working width: 51 cm - Tank capacity: 40 liters (fresh/dirty water) - Surface performance: approx. 2,000 m²/h

Condition: excellent (used), Year of construction: 2017, operating hours: 1,50,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 Nodpfxsx Hg Ibo Afaocn • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 620 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine. Additional equipment • Optional chucks and approx. 260 HSK63 holders with rack • CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling not inckluded but for sale • Note: The Y-axis is louder than it should be. We recommend replacing the bearings for the Y-axis. However, the machine is running and is still in production. Machine Benefits Ncsdpfx Asx D Niajfaen Technical Machine Benefits • Workshop 60-space / internal cooling / internal coolant supply plus air cooling Extra Information Milling spindle S = 18,000 rpm, HSK-A 63 Heidenhain - Linear measuring system X, Y, Z/ Air purge for all linear measuring systems/ Active air-to-air control cabinet cooler/ Active cooling for the 4th and 5th axes, controlled Network connection + USB connection/ Spindle cooler, controlled/ Heidenhain iTNC 530 control panel, right-hand side/ Heidenhain rotation measuring system/ POS kinematic module including reference ball/ POS contour lock/ Automatically controlled crane loading hatch External hinged chip conveyor/ Coolant pump on the head via M functions Pump for chip flushing device/ Chip flushing device/ Water gun/ Operating status indicator Air at the spindle/ Electromechanical oil/coolant separator/ Automatic coolant level monitoring/ 3-way media connection in the Table center/ Hydraulic power unit including M-function control Mobile electronic handwheel/ Variants included in the special price/ Through-spindle air/ 60-station HSK-A 63 tool changer/ Internal coolant supply 20 bar with belt filter unit/ Kessler table diameter 500 mm/ Preparation for workpiece measurement/ Infrared workpiece measurement - 3D probe Tool measurement via BLUM laser/ Rotating viewing window/ POS DCM collision module

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, controller manufacturer: HEIDENHAIN, controller model: TNC 530, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm Nedpfx Aoyir Dxjfaocn • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled

Year of construction: 2016, condition: used, machine/vehicle number: 150 90105_120652_100937, complete unit with control cabinet and manual operation  tool holder ISO 40 drilling capacity 35 mm in ST 60 max. torque on the drill spindle 300 Nm concentricity 0.01 mm stepless speed control from approx. 200 up to 3,350 rpm with speed display  operation by cable remote control precision cross table with three axes travel distance X - 200 mm /  Y - 200 mm manually lockable swivel range + / - 90° electrical data 400 V / 3 KW connection CE 32A transportation of  milling unit and of cross table in aluminium transport boxes Nsdpjt U Tubsfx Afajcn transport dimensions on pallet length - 1,200 x width - 950 x height - 1,450 mm weight approx.  350 kg documentation available

Condition: good (used), Year of construction: 2011, machine/vehicle number: 12160000083, functionality: fully functional, operating hours: 12,926 h, travel distance X-axis: 936 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 651 mm, number of slots in tool magazine: 30, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 935 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Table Dimensions: 1,200 x 850 mm Table load capacity: max. 4,000 kg Ncjdpfx Ajwu Em Sefaon Spindle Spindle speed: 10,000 rpm Power: 44 kW Torque: 288 Nm Tool system Magazine capacity: 30 Tool diameter: 160 mm Tool length: 365 mm Feed rate: max. 40,000 mm/min Rapid traverse: 40 m/min MACHINE DETAILS Dimensions: 5.1 x 3.1 x 3.2 m Weight: 14.6 t Connected load: 63 kVA Operating voltage: 400 V, 50 Hz Program run hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT – without magnetic table