Industrial robot Robot

Kuka KUKA KR8 R1620 Cybertech

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Fsdpfx Afjukd Drspefu Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Complete Ilapak packing line consisting of Ilapak multihued weigher mod WA 10/50 & Ilapak vertical bagging machine mod VT 2000 GF S whit a pipe diameter of 185 mm. Year of construction 2012 on both of the machines. Including cleaning platform for the scale hoppers. Fodpfx Afsxl T Ayjpjfu

Condition: used, Year of construction: 2021, operating hours: 17,531 h, functionality: fully functional, machine/vehicle number: 1028149, overall weight: 56 kg, load capacity: 6 kg, arm reach: 726 mm, The machine in question is a KUKA KR 6 R700-2/FLR Year of manufacture 2021 We are also happy to offer you this robot overhauled! The robot has the following options: A01_PLC A03_GRP A90_TMO BoardPackage DiagnosisSafety Fodpfsrmm A Tjx Afpefu KrcAutoInstall KUKA.CPC KUKA.NonAdmin LoadDataDetermination NWC Profinet KRC-Nexxt SafeOperation WristMamesOffset

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Fodpfstk N E Tsx Afpjfu Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Year of construction: 2026, condition: new, Lifting conveyor for end of line with Vertical Form Fill Seal machines Conv belt width - 310mm Pick up height - 240mm Lifting height - 1000mm Ffsdpfx Ajk N A Suefpsu Speed - 9,5m/min With castor wheels

Condition: good (used), Graseby Best Checkweigher Stainless frame, overall length 1600mm, weigh platform 440mm x 300mm, weighs from 100g - 500g, pneumatic blow reject into reject bin, 3Ph Fsdpogmth Sefx Afpefu

Year of construction: 2009, condition: not inspected (used), Bizerba CWE Checkweigher Fsdpfx Ash Aphfsfpefu Min 50g Max 1500/3000g e=d= 0.5/1g

Condition: as good as new (ex-display), Year of construction: 2017, ## KUKA KR10 R1100 sixx Here’s a detailed description of the KUKA KR10 R1100 sixx robot arm, including its key specifications, features, typical applications, and things to consider. ### Key Specifications Here are the core technical specs for the KR10 R1100 sixx: * Number of axes: 6. * Maximum reach: ~ 1,100 mm (often quoted as 1100 mm or 1101 mm) to the wrist. * Maximum payload: Up to 10 kg is often cited (depending on centre of gravity and tooling) for the version. * Note: Some sources say the robot is designed for a rated payload of 5 kg to optimise dynamics, but supports up to 10 kg under specific conditions. * Repeatability (pose accuracy): ±0.03 mm. * Robot weight (manipulator alone): ~ 54–55 kg (varies with configuration) according to listings. * Protection rating (wrist or robot): IP54 for typical version. Fedpfx Aewdq Uaefpefu * Mounting options: The robot supports flexible mounting – floor, ceiling, wall mounting are possible. * Controller: Typically paired with the KRC4 compact (or other KUKA small-robot controller versions) in this line. ### Features & Strengths * High dynamics: With a relatively light arm, modest reach (for an industrial robot), and good payload margin, this robot is engineered for fast cycle times and responsiveness. ([KUKA][4]) * Precision: The repeatability of ±0.03 mm means it can be used for tasks that require good accuracy. * Flexible integration: Given its compact size and good reach/payload for that size, it can be mounted in many ways (floor, ceiling, wall), which helps for tight or unconventional spaces. * Tooling & payload flexibility: While nominal payload is up to ~10 kg, the real effective payload will depend on tool centre of gravity (TCG), additional mass, inertial loads, etc. The manufacturer emphasises verifying for specific load cases. * Robust build & industrial readiness: KUKA’s “Agilus/sixx” line (of which this model is part) is meant for high‐speed, small to medium payload automation in manufacturing. Typical Applications Given its specs, the KR10 R1100 sixx is well‐suited for tasks such as: * Material handling of smaller to moderate parts (up to ~10 kg) with reach ~1.1 m. * Machine loading/unloading, especially for press or injection‐moulding machines, where speed and compactness matter. * Assembly tasks where both reach and accuracy are required. * Pick & place operations, packaging, palletising (within its payload range). * Situations where the robot needs to be mounted overhead or at an angle (ceiling or wall) due to space constraints. The KUKA KR10 R1100 sixx is a capable 6-axis robotic arm offering roughly 10 kg maximum payload (subject to conditions) and about 1.1 m reach, built for high speed and accuracy in a relatively compact form. It’s well suited for medium-duty tasks in manufacturing automation where flexibility, precision, and compact installation are required.

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: AC, Vertical Packaging Line CAMPAGNOLO C95E-1 + CW14-2.5L (Snacks, Nuts, Cereals, Extruded Products) Complete vertical form-fill-seal packaging line designed for dosing and packing snacks, cereals, or extruded products. The system combines a multihead weigher, vertical bagging machine, and advanced marking and promotional accessories, ensuring high flexibility for different bag types and formats. COMPONENTS Vertical Packaging Machine – Model C95E-1 • For pillow bags and square-bottom bags • Compatible with mono-seal and bi-seal heat-sealable films • Output: up to 60 bags/min (square-bottom) or 80 bags/min (pillow) • Bag width: 50 – 245 mm  Length: up to 390 mm • PLC control with 7-inch color touchscreen (50 recipe memory slots) Ffedpfxeqbryxs Afpeu • Horizontal sealing driven by brushless motor; vertical sealing pneumatic • Encoder for variable bag length adjustment • Automatic film-splicing device and end-of-film alarm • CE-compliant safety protections (EU Machinery Directive 2006/42/EC) • Power consumption: approx. 3 kW  Air consumption: 300 L/min at 7 bar Included accessories • Round forming tube + additional forming set (round and rectangular terminals) • Square-bottom and gusset forming group • Euroslot hole punch unit • Photocell for centered print registration • Stainless-steel product contact parts (AISI 304) • Bag discharge chute and 350 × 2000 mm evacuation conveyor • Stainless-steel rotating table, Ø 1200 mm Multihead Weigher – Model CW14-2.5L • 14 weighing heads with 2.5-liter detachable buckets • Stepper-motor operation for precision and quiet running • Accuracy: ± 0.2 – 1.5 g (depending on product) • Speed: up to 75 weighings/min for 40 g packs • 10-inch color touchscreen with 99 recipe capacity • Full stainless-steel frame (AISI 304), IP65 protection rating • Auto-diagnostics and self-test functions • Power requirement: 1.1 kW, 220 V, 3-phase, 50 Hz Included accessories • Synchronization bucket with stepper motors • Buffer feeding belt • Support frame with ladder and safety rails • Product elevator (400 × 5500 mm) • Vibrating feeding hopper (170 L) Additional Integrated Options • Ribbon Printing and Marking • Programmable thermal-transfer ribbon coder, print area 32 × 50 mm, 300 dpi resolution, supplied with software for layout and logo management. • Promotional Ribbon Insertion Unit (Extra-Ribbon Group) • Automatic device for attaching promotional ribbons during bag formation. • Chapelet Group (Chain-of-Bags Formation), for forming continuous strips (chains) of connected bags. • Nitrogen Injection System for modified-atmosphere (MAP) packaging to extend shelf life of products.

Condition: excellent (used), Bradman Lake DRT robotic top loader machine, can be available with SL903 cartoner. This line was packing cereal bars into small and large cartons for a major UK brand of natural cereal bars. It has only just come out of production (early September 2023). Ffedjn Uph Uopfx Afpsu