TEACH PENDANT EXTENSION CABLE

KUKA 00-110-438

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton Njdsifkldepfx Ab Usdb YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Nodehz Ua Sjpfx Ab Uedb

Condition: excellent (used), Year of construction: 2000, stroke length: 850 mm, operating speed: 8 mm/s, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, overall weight: 4,07,000 kg, controller manufacturer: Cybelec DNC 1200, working width: 15,400 mm, bending force (max.): 2,000 t, distance between stands: 12,000 mm, number of axes: 8, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Nsdjyvh Arjpfx Ab Uedb Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: new, Brand new tandem press line ISGEC from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Ndsdpjihfwtofx Ab Uob

Condition: excellent (used), functionality: fully functional, Number of axes: 6 Maximum bending length: 4100 mm Bending force: 200 tons Njdpfxoyizidj Ab Usdb Bending thickness: 6 mm Stroke: 215 mm Maximum approach speed: 200 mm/s Power: 15 kW Weight: 15,600 kg

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm Nsdpfecb T Twjx Ab Uodb - Kaiser scrap shear on the left side - soundproof cladding

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Nsdpfx Aexlh Rfeb Uodb Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Ndsdpfju Axzkjx Ab Ueb Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Ndedpsr Dwpmjfx Ab Uob Available from 01.08.2024 *

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2900 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months Ndjdpfxsipxzpj Ab Ujb - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site