Used coordinate measuring machines for sale (345)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg Laedpfxozcqy Ej Alyoh The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: used, Year of construction: 2004, Mitutoyo CRYSTA-Apex C7106 – used CNC coordinate measuring machine with a gantry design, professionally inspected and fully functional. The proven C-series from Mitutoyo stands for measurement stability on a granite base – ideal for precise 3D measuring tasks in the metrology lab. Technical data: - Measuring range: 700 x 1000 x 600 mm - Control system: UC-200H - Software: MCOSMOS-1 V4 - Probe system: Renishaw PH10M Equipment & accessories: - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Mitutoyo calibration certificate 08/2026 (WK-2060334-26) Included in the scope of supply: - Coordinate measuring machine CRYSTA-Apex C7106 - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Computer system with MCOSMOS-1 V4 - Mitutoyo calibration certificate 08/2026 Not included in the scope of supply: Laedpfx Alsz Tffnoysh - Automatic probe changer / probe changing rack Condition: used, inspected – fully functional. Year of manufacture: 2004. Procedure: Inspection by appointment. Disassembly and loading will be carried out by us, transport on request. Location: Leonberg, Germany. Kneissl Messtechnik GmbH – your specialist for coordinate measuring technology with an accredited DAkkS calibration service. Installation, training, and instruction are optional.

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 88229, total width: 1,450 mm, total length: 2,100 mm, overall weight: 3,800 kg, table width: 1,000 mm, table height: 850 mm, table length: 2,100 mm, Equipment: type plate available, Coordinate measuring machine: Zeiss MC 850, 08/12/06, UHING Year of manufacture: 08/1990 Serial number: 88229 Control system: C99 Dongle available: Yes Software: Calypso 7.6.4 Measuring head: VAST XT – Good condition – PC included – New software + license – Everything packed for transport with original Zeiss transport securing devices (value of transport securing devices approx. €5500) X-axis as a longitudinally movable portal, 850 mm Y-axis cross slide in the portal, 1,200 mm Z-axis as a measuring head quill (vertical), approx. 600 mm Through-passage between the portal, approx. 1,000/1080 mm Lasdpfoz T T T Tox Alyjh Through-passage in height, approx. 750 mm Overall table size, approx. 1,000 x 2,100 mm Table height above the floor, approx. 850 mm Machine height, approx. 3,050 mm Weight, approx. 3,800 kg The machine was in use until recently. Free loading.

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Lajdjz Ditvopfx Alyoh

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Lsdpfe Aa Nc Njx Alyjah Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. We offer worldwide delivery on request!

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Note: Set is sold without monitor / PC unit (option to equip according to your needs) Lsdpfx Alsz Sllyoyjah Manufactured: Made in Japan

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: - VL-500 control unit - VL-550 500mm base - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm User manual and quick start guides are included. Ljdpfx Alez Ihkbsyoah New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156521, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Laodpfx Aozwwkxjlysh Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. Ljdpsz Ebzbefx Alyoah The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054390, measuring range X-axis: 1,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,200 mm, Manufacturer: Wenzel Model: LH 1512 Serial No.: 054390 Year of manufacture: 2005 Measuring software: Quartis Laedpoz Sy S Tjfx Alyjh Measuring volume X/Y/Z mm: 1500mm/2500mm/1200mm Control panel: HT400 Probing system: PH10M / TP200 Control system: WPC 2040 Supply: 6 bar Power requirement: 230 V Accuracy: E0, MPE 3.7 µm + (L/250mm) PForm.Sph.1x25:SS:Tact 3.7µm Machine weight: approx. 12500 kg Workpiece weight: approx. 3750 kg Space requirement CMM: L ≈ 4000mm / Width ≈ 2560mm / Height ≈ 4030mm Equipment: Active damping Accessories: Ball standard, probe changer SCR200 Condition: Used, regular maintenance performed Options: DAkkS – Calibration possible The machine can be modernized with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes Laodpfxjy R A Apj Alyoh clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: like new (used), Year of construction: 2023, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 3,200 mm, measuring range Z-axis: 2,100 mm, workpiece weight (max.): 4,500 kg, total height: 3,660 mm, type of input current: AC, total length: 4,800 mm, overall weight: 11,000 kg, input voltage: 230 V, table width: 3,200 mm, table height: 725 mm, table length: 4,800 mm, year of last overhaul: 2024, Equipment: documentation/manual, type plate available, Dual-column CMM * Floor-mounted design (measuring plate in one piece, 5000 x 3100 mm) * Measuring plate is decoupled with active vibration isolation Measuring range * X 4,000, Y 2 x 1,600 (3,200), Z 2,100 [mm] * Overlap of columns in Y = 150 [mm] Measuring uncertainty Single column: 20 + L/60, max. 60 [µm] at L = 4,000 mm Dual column: 40 + L/35, max. 80 [µm] at L = 4,000 mm Dynamics 3D traversing speed 433 mm/sec 3D acceleration 768 mm/sec² Probing system (per column) * HEXAGON HH-AS2.5° * Optical laser scanner, type HP-L-10.10 Controller (per column) * DC800 ETH Wireless operating unit Lodpfx Aloz Rpmwsysah * Portable terminal with display Computer (per column) * DELL Tower, 24" monitors * According to the software manufacturer's specifications Software (per column) * PCDMIS CAD++ 2026.R1 * Option: Laser sensor HP-L-10.10 * Dual-column function Extensive accessories * Calibration sphere holder - tactile probes - equipped with 3 * Calibration sphere holder - optical laser - equipped with 2 * Variable stylus assortment * 8-position modules in various lengths * SICK light curtain system integrated for automatic operation, all-round Supplier services * Transport, commissioning, calibration, final acceptance Warranty * 12 months, from the date of acceptance Availability * Short-term

Condition: like new (used), 3D Machines – Brown & Sharpe Standard Lsdpfx Aozndw Tslysah

Condition: used, Hexagon Type: Hexagon Optiv Performance 442 Product description: The 3D multi-sensor coordinate measuring machine Optiv Performance 442 combines optical and tactile measurements in a single system. The system supports multi-sensor measurements with a vision sensor, tactile sensor, TTL laser (Through-The-Lens), and the innovative Chromatic White Light Sensor (cws). The base unit with a vision sensor can be expanded with all available sensors in a modular fashion. Lasdpfx Alszgr R Eeysh Application areas: • Suitable for use on level floors • Versatile geometric measurements and GD&T analyses with standard construction accuracy • Design principle: » Low-vibration granite construction with a fixed bridge and a movable table » Integrated substructure with optional vibration dampers • Guides: » Precise mechanical linear guides in all axes • Drives: » DC servomotors, power transmission via backlash-free recirculating ball screws in the center of gravity • Length measuring system: » Incremental length measuring system • Resolution: 0.1 pm Hexagon Optiv 442 multi-sensor measuring machine equipped with a camera, laser, and Renishaw probe system. • Measuring range per sensor: 410x410x200mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. load capacity: glass plate 30kg • Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) • Max. travel speed per axis: 200mm/s • Camera with 2-stage zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5% Power consumption 1000 VA Weight: approx. 1100 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Ledpfx Aloz Hw Elsyeah Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Lasdezwvk Repfx Alyjh Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system Ljdpfjztyabjx Alysah   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, type plate available, Very good condition, original software including hardware key. Renishaw measuring probe. Direct sale to end-users only. Lajdezw Rpnjpfx Alyoh Price includes loading at the seller's location: W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: p1276453, measuring range X-axis: 1,200 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 650 kg, total height: 2,650 mm, type of input current: AC, total width: 1,271 mm, total length: 2,081 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 1,750 kg, input voltage: 220 V, table height: 800 mm, compressed air connection: 6 bar, year of last overhaul: 2025, ambient temperature (max.): 20 °C, Equipment: documentation/manual, type plate available, Measuring volume: 1200x700x600 mm, measuring accuracy: MPEe = (2.2 + U350) µm, MPEp = 2.5 µm. Includes a base frame with integrated dual passive vibration damping, highly precise granite guideways, bellows covers. Automatic rotary swivel head RTP20 from Renishaw, with TP20 probe. Probe changer magazine MCR202. Probe module TP20 Standardforce (Serial No.: MCR20 39E429, TP20StdF 49F352, TP20 StdF: 11C613). Lajdezl Ebhepfx Alyjh Measuring software ThomControl. TERRA PC Business 7000 i7. One-hand joystick MCU-Lite from Renishaw. CNC control UCC-T3 PLUS.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. Laedpfx Alszvyrceyeh The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Please feel free to contact us for more information or to schedule an appointment.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer the following machine for sale: Keyence WM-6025 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Lsdpfx Aoz Sxr Solyjah This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD Year of manufacture: 2001 Completely refurbished optically in 2024 and 2026 Last calibration: 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition Laodpfxszkhzhs Alyeh Device features, equipment: C99 control unit with operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine, 17-position Probe changing plate, 20x Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options possible Further accessories and options possible Available on short notice

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Lasdpfx Alezii Dhsyoh Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. Lodpfx Aozwu Alslyjah HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Lodpfx Aozx Uwxjlyjah Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.