KUKA Central Hand ZH 125/150 II VA6

KUKA ZH 125/150 II VA6

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Chedpfxjfzk Ewo Ab Uea Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Automatic filling: Available Automatic dosing: Available Lid: Pneumatic piston Programmable: Yes with PLC Liquid level control: Available Codpfx Asfg Eqwjb Ujha ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative

Condition: used, Year of construction: 2018, Industrial robot Manufacturer: Kuka Type: KR16 R1610 Cybertech Year of manufacture: 2018 Reach: 1,612 mm Weight: 263 kg Payload: 16 kg Kuka controller KRC4 Weight: 145 kg Software version: V8.5.4 Cjdpfxoxtdals Ab Ueha Kuka touch panel Kuka connecting cables ä22726

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B Robot Full of options Chjdpfxexq Ttij Ab Uja DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2019, operating hours: 50 h, ABB IRB1100 Omnicore 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Chodpfsxq Tuysx Ab Uoa

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced - completely measured - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange Codpeg A Iv Eefx Ab Usha (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists.

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused Chjdpfxegz Tcio Ab Usa - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - KUKA wrist new adjustment - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible On stock more than 100 central hands on stock, various models. Ask a question! Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Csdpfx Abexdm Uae Uoha

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB6700-300/2.7 IRC5, load capacity: 300 kg, arm reach: 2,700 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Excellent basic condition. This robot will be professionally cleaned but not repainted. Chedpswqqtvsfx Ab Uja Brand: ABB Type: IRB6700-300/2.7 Controller: IRC5 Payload: 300 kg Reach: 2.7 m Comes with an ABB Lean ID (see document): The IRB 6700 LeanID ensures flexible operation and minimizes downtime (due to cable wear), providing better process efficiency and reducing manual handling. In short, IRB 6700 LeanID delivers a strong return on investment. Optional: We can deliver the robot with an ABB IRBTx004 track (up to 32 meters if needed). Complete with the 7th axis drive unit installed in the robot controller, motor, cable chain, grease pump, fully functional and operational. About: Our daily, reliable business is the delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Established in 2002. We ship worldwide.

Condition: used, - Power consumption: 26 kVA 3P400V /N/PE/50HZ; protection 63A - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa, min. 20 m/s, follow-up time 15s Csdswpkc Iopfx Ab Ujha The system has been cleaned, packed by the manufacturer, preserved, and stored. It is complete and ready for operation. The system can be inspected at any time by appointment.