Center Lathe

LACFER C-R-1-215

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display Hodob Eldnjpfx Adwong machine in stock and immediately available

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes Hnsdpfx Aou Ixznjdwsg *

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm Hnodpfx Adstzf N Rewjg -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Center Distance: 300mm Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Leadscrews Metric Pitch: 0.25 – 3mm/rev Hodpfx Adjw Imhvowong Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Hnjdoghgftepfx Adwsg ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: new, Year of construction: 2025, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 Hodpfsud H H Uox Adwjng reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: good (used), Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 2x injection pumps available Hjdpfx Adjh It Trjwjng -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

Condition: new, Year of construction: 2025, 0330 mm 210 mm Hnsdpfx Ajwp Tq Uodwjg 1000 mm 167 mm 40 mm 2,2 kW

Condition: new, TC 205 x 1000 Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 Hnodpfoir If Dex Adwsg motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine shoes (1 set of 6) - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, High-performance 10-color web offset press with integrated flexo finishing: Equipped with 2 brand-new ESS flexo units with UV curing (only tested, never used in production), Contiweb non-stop unwinder, Müller Martini cross cutter with Unistacker, and AMAL non-stop rewinder. Advanced register and quality control systems, wide substrate compatibility, and flexible UV/Hot Air drying configuration. Key Features • 10-color web offset press • 2 ESS flexo units with UV curing – brand new, only tested, never used in production • Contiweb non-stop unwinder for continuous roll changes • Müller Martini cross cutter with Unistacker • AMAL non-stop rewinder • IST UV system for UV varnishing and special applications • Hot air drying for dispersion coatings • Comprehensive register & quality control (video monitoring front/back, longitudinal & lateral register, color zone control) • Extensive substrate flexibility (paper and films) Technical Specifications • Drive/Power: 2× DC main drives, total 72 kW • Electrical: Press 300 A; UV 200 A; 6 UV units • Printing units: 10 cassettes 25" + 9 cassettes 24" (10-color configuration) • Turning bars: between units 2/3, 4/5, 5/6 • Formats: 24" and 25" • Plate sizes: o 24": 627 × 745 × 0.30 mm o 25": 652 × 745 × 0.30 mm • Blanket: 1.05 mm – 765 × 635 mm Substrate Range • Paper width: 220 – 740 mm • Max. printing width: 740 mm • Paper weights: 40 – 300 g/m² • Film thickness: 12 – 300 µm • Channel: 4 mm Reel Handling • Unwinding: Roll diameter 127 cm Hjdpfx Asxdt D Isdweng • Rewinding: Roll diameter 127 cm; cores 70 / 76 / 150 / 200 mm; roll-to-roll • Peripheral equipment: Contiweb non-stop unwinder, Müller Martini cross cutter with Unistacker, AMAL non-stop rewinder Flexo & UV Equipment • 2 ESS flexo units with UV curing (new): ideal for coatings, special colors, inline finishing • Hot air drying for dispersion coatings (front & reverse) • IST UV system (UV varnishing) – configurable positions within the machine UV/Thermal Drying Options • IST UV: multiple installation positions (e.g. after units 1, 2, 4, 5, 10, and at the flexo unit) • Hot air: front/back, suitable for dispersion coatings Anilox & Printing Modes (Flexo) • Anilox volumes (examples): 30 / 14.2 / 13.5 / 9.1 / 8 cm³/m² • Cylinder configurations (24" & 25"): 4/0, 3/1, 2/2 Register & Quality Control • Web guiding • Video monitoring (front & reverse) • Longitudinal & lateral register • Color zone control Finishing & Tooling • Remaliner: 4 single + 2 double discs • Punching: o 24": divisions 0 / 4 / 6 / 8 / 12 (head/side); 2 discs, 80 mm spacing, eccentrically adjustable o 25": divisions 0 / 4 1/6 / 6 1/4 / 8 1/3 / 12 1/2 (head/side); 4 discs, 80 mm spacing, eccentrically adjustable • Perforation: o 1× perforation cylinder 24" (division 0 / 4 / 6 / 8 / 12; partial perforation possible, mounted on punching shaft) o 1× perforation cylinder 25" (division 0 / 4 1/6 / 6 1/4 / 8 2/6 / 12 1/2; partial perforation possible, mounted on punching shaft) o 1× magnetic cylinder 24" Peripheral Equipment & Handling • Contiweb non-stop unwinder (continuous roll change, increased efficiency) • Müller Martini cross cutter with Unistacker (inline cross cutting & stacking) • AMAL non-stop rewinder (trouble-free, high reliability)