Milling and drilling

CORMAK ZX7045B1 + DRO

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Duedpfx Adorvgyxe Ijp Extension length: 11500 mm

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system Dujdpfsxf Ey Rex Ad Iop DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Dsdpfxoq D Dzlo Ad Isup Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10520, USED YANMAR CRAWLER DUMPER C/W NEW RUBBER TRACK MODEL : C30R SERIAL : 10520 Duodpfsyiabvjx Ad Ijp

Condition: new, Year of construction: 2026, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Duodpfew H Rdmsx Ad Iep Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Dedpfsv Nzucox Ad Ijup

Condition: new, WMD45 - ROGI Drill Cutter Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement of the work table ----- 560 mm Transverse displacement of the worktable ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3F INCLUDED * Drill head with pin ISO30 - B16 * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * Tap function * Digital depth stop * CE plug Duodpfxjga T Ans Ad Iop OPTIONS * Base cabinet * Router clamp * ISO30 router bit holder + 12 collets in case * Router set

Condition: used, Pillar drilling machines Dsdeb N Ezrepfx Ad Ijup

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 634 h, control type: CNC control, controller model: CN DELEM T3500T, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 350 mm, distance between stands: 3,384 mm, installation height: 500 mm, type of crowning: CNC-controlled, TRUMPF TRUBEND 3100 Press Brake (X) Version with Increased Clearance to 500 mm Only 634 hours powered on! Protective laser CNC crowning table DELEM T3500T CNC control CNC axes: Y1/Y2/X/X2/R/Z1/Z2 Year: 2019 Currently tooled for a bending length of 2550 mm 1 die (V6 mm) with a length of 2550 mm included as additional equipment. MACHINE NOT ANCHORED TO FLOOR Specifications Bending length: 3060 mm Capacity: 100 tons Frame gap: 3384 mm Ram stroke: 350 mm Dusdpfx Aox E Ag Dod Isp Motorized backgauge travel: 560 mm Distance table-to-ram: 500 mm Main drive power: 24 KVA Weight: 8,300 kg Machine dimensions (L x W x H): 3,607 x 1,644 x 2,800 mm

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. Dodpfx Adsxcgy Ho Ijup The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.