Spinning machine LEIFELD - PLB 1200

LEIFELD PLB 1200

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Codpoq Dqdijfx Abzerc Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. Cjdpoxn Tz Iefx Abzerc - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: good (used), Working diameter Ø 2400mm Crodpfxeucdh Te Abzsc Max sheet thickness: 9,5 mm

Condition: good (used), Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm Crsdpfofc T Tqsx Abzoc -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: good (used), Feed through production line for wooden doors very hight efficiency one complete door in 30 seconds (lock hole, handle hole, anuba hinges) Machine composed from two parts - so in the same time 2 doors are processed each from both sides Each part of the machine can work independent on the left side and right side Part 1 - left side milling for strike plate and milling handle hole and key hole - right side in the same time makes boring for anuba hinges Part 2 - left side milling for lock hole - right side in the same time makes inserting anuba hinges Cedpfx Abjuq Scpezjrc

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Csdpfelhwr Rex Abzsrc Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN Codpfxop Audqe Abzerc SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm Codpfx Aex Sx R Sobzsrc The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm Csdpfek Dz N Iox Abzjrc range of turning diam 460-1250mm

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cjdsqakhuopfx Abzorc Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.