Spinning machine

LEIFELD PLB 300

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Bljdsxp Sb Aepfx Agksd Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Bjdpfsdzqbljx Agkeld Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Manual spinning machine make Leifeld Type Plb 300 - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrics and buttons - operation new - New paintwork Blsdpfx Agordzv Rskjd Technical data Tip height mm 350 Tip width mm 800 Machine length mm 2100 Spindle motor kW 4.0 4-speed gearbox Speeds approx. 1/min 200 - 1000 Spindle holder M60 DIN 800 Hand steel support Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1100 Special equipment built into the machine - Tip height mm 350 - MK 3 ball bearing pressure center - Stepless spindle speed control in the indexing steps by frequency-controlled drive motor - Electrical switching - Circulating oil lubrication On request: - Cross support PS30/300

Condition: excellent (used), Offered is a used slurry pump / sewage pump. SDAG Wismut-Aue. Blodpfx Ashwnfcegksd Details see photos.

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Bledpjxlza Hefx Agkod Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m Bjdpfou Ibvhex Agksld It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Bsdpstia Hhjfx Agksld

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm total power requirement 35,00 kW Bledpfx Asw Dvipjgkod weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Bsdpfx Agsvwcwujkjld

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Bljdepugwiepfx Agkjd The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.