Servo motor 3.9 kW 3455 rpm

Lenze** MDF

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Condition - fully functional. Nodpfovx S Hnsx Ac Aewd

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Drying capacity - 10t/h Nwedsrl Ra Hopfx Ac Aod

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. Nwodpfx Ajin Ey Sec Ajd

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed Njdpfx Acsu Rl Rus Aswd max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Nwedpfju Rl Sfsx Ac Ajd Motor 18.5 kw frequency-controlled for variable speed without vibrating chute

Condition: refurbished (used), Wood chip screen IDL000756 Nedpfx Ajtmtf Roc Aowd - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: used, Year of construction: 2004, Technical details: rated capacity: 60 kVA control: Modulsteuerung type of fuel: Biogas weight of the machine ca.: 1,9 t dimensions L x W x H: 2,9 x 1,4 x 1,9 m output: 55 KW Njdpfx Aceu Nvcls Aowd Functionality unknown. The generator is sold as a spare part donor at a very reasonable price! Ambient temperature 221°F / 105° C Operation via control panel on the control cabinet door. Base frame is a steel construction on which the generator is mounted. Hour counter digital Engine: -4-cylinder; Liebherr type G 924 TI, turbo with intercooling; speed 1,500 rpm. Generator: -VEM Motors; 400 V / 690 V, speed 1,555 rpm; power max. 75 hp / 55 kW. Gas mixer: -RMG Regel- Messtechnik GmbH; type RMG 983-100/50 *

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet Nwodpjdz Spwjfx Ac Asd - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: used, tool clamping area 150x18 mm weight 0,001 t Nwsdped Iha Tjfx Ac Aed turning tool with insert - like new. L/W/H: 250x40x100 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Nedpfew A Ng Eox Ac Aswd Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.