For dispensing double-sided adhesive tape and tear tape.
However, this series is also designed for processing corrugated board.
Due to the automatic non-stop feeder also larger quantities can be processed.
Most paper tapes, plastic tapes, foamed tapes or reinforced tapes up to a thickness of approx. 3mm can be dispensed with the RAP applicator.
The RAP applicators are available in three working widths up to approx. 100 mm tape width.
In addition to solid board and cardboard, Athos machines can p...
cutting diameter 220 mm
Bq23ztw28p
band length 425 mm
cutting lenght max. 2500 mm
total power requirement 0,95 kW
weight of the machine ca. 219 kg
dimensions of the machine ca. m
Working range 90° 220 mm
90° / 190 x 190 mm / 220 x 170 mm
45° 130 mm
45° / 130 x 130 mm / 130 x 190 mm
motor 400 V / 50 Hz 0,95 kW
Cutting speed 16/32 m/min.
Stroke rate p.min. 54/108
Ciggzkpsje
Stroke length 140 mm
Feed regulation infinitely variable
Saw blade dimension 400 x 30 x 1,5 mm
Working height 500 mm
Weight 219 kg
cutting diameter 330 mm
saw band length 3870 x 34 x 1,1 mm
cutting width 400 mm
band speed 15 - 90 m/min
400 x 200 mm
cutting capacity - round 330 bei 90° mm
250 x 140 mm
cutting capacity - round 240 bei 45° mm
work height max. 945 mm
cutting capacity - square 320 bei 90° mm
cutting capacity - square 200 bei 45° mm
total power requirement 3,0 kW
weight of the machine ca. 720 kg
dimensions of the machine ca. 2650 x 2040 x 2050 mm
Very robust machine framework composes of castings from grey c...
PILOUS Double miter band saw ARG 235 plus
Vv8cgy
Incl. special accessories: driven chip brush, band tension indicator.
Cutting range:
Round:90° -45° +45° +60°
in mm.235-165-185-115
Square:90°-45°+45° +60°
in mm.230-145-160-80
Rectangle:90°-45°+45° +60°
in mm.280 x 180-185 x 80-185 x 100-115 x 80
Main motor 400 V, 50 Hz, 1.4 kW
Pump motor 400 V, 50 Hz, 0.05 kW
Saw blade speed 40/80 m/min.
saw band length 2710 x 27 x 0,9 mm
working height from vice 900 mm
Coolant tank approx. 15 l
Machine dimensi...
Capacity 90°: 260°
Bu9xg8nune
Cutting flat 90°: 300 x 200 mm
Capacity L 45°: 175°
Capacity R 45°: 200°
Cutting speed Vario:35 + 70 m/min.
Circle blade size: 2880 x 27 x 0,9 mm
Power: 1,4 kW
Length: 1.900 mm
Width: 1.800 mm
Height: 2.000 mm
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it...
PILOUS Double miter band saw ARG 260 plus E
Incl. special accessories: driven chip brush, band tension indicator.
Cutting range:
Round:90° -45° +45° +60°
in mm.260-180-200-125
Square:90°-45°+45° +60°
in mm. 240-160-185-105
Rectangle:90°-45°+45° +60° in mm.
in mm.300 x 185-190 x 105-185 x 295-125 x 105
Main motor 400 V, 50 Hz, 1.4 kW
Pump motor 400 V, 50 Hz, 0.05 kW
Saw blade speed 35/70 m/min.
saw blade length 2880 x 27 x 0,9 mm
Cfr9czoa92
Working height from vice 900 mm
Coolant tank approx. 15 ...
Capacity 90°: 235°
Cutting flat 90°: 280 x 180 mm
Capacity L 45°: 185°
Capacity R 45°: 115°
Cutting speed Vario:40 + 80 m/min.
Circle blade size: 2710 x 27 x 0,9 mm
Power: 1,5 kW
Length: 1.930 mm
Width: 1.610 mm
Height: 2.000 mm
Pc9rh
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will...
PILOUS double miter band saw ARG 260 plus H
with automatic hydraulic lifting of the saw frame
Incl. special accessories: driven chip brush,
Belt tension indicator
Roller conveyor D 300 / 3m incl. manual measuring system
Roller conveyor D 300 / 3m
Cutting range:
Round:90° -45° +45° +60°
in mm:260-175-200-125
Square:90°-45°+45° +60°
Cnlandbq
in mm:255-145-185-120
Rectangle:90°-45°+45° +60°
in mm.300 x 200-190 x 100-185 x 200-125 x 120
Main motor 400 V, 50 Hz, 1.4 kW
Pump motor 400 V, 50 Hz, 0.05...
PILOUS double miter band saw ARG 300 plus H.F.
with automatic hydraulic lifting of the saw frame
Incl. special accessories: driven chip brush, belt tension indicator
Roller conveyor D 400 / 3m incl. digital measuring system
Roller conveyor D 400 / 3m
Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm
Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm
Rectangle:
90°375 x 190mm,
-45°240 x 100mm,
+45°240 x 160mm,
+60°150 x 150mm
Main motor:400 V, 50 Hz, 2,2 kW
Pump motor:400 V, 50 Hz, 0,05 kW
Cofwaxpii
Hy...
Motorised concrete block machine
Production of concrete blocks for use in: masonry, foundation, pillars, floors and chimneys.
Powerful hydraulic pressing
Operator seat
Concrete bunker – 500 liters
Automated lift of the counter mold
Mold maximum dimensions: 1200x400mm
Maximum height of concrete product: 200mm
Cycle duration: 45 seconds
Installed power: 5.5kW
B9erxjtqdk
Supply voltage: 380V
Overall dimensions: 2.2 x 2.0 x 1.85m
Mass (including mold): 2000kg
Vibrator motor rotation frequency: 3000r...
pressure 220 t
chamfer lenght 4050 mm
distance between columns 3600 mm
stroke of upper beam 265 mm
throat 450 mm
dayligth 530 mm
working feed 10,0 mm/sec
ajustment speed 160 mm/sec
return speed 140 mm/sec
Control ModEva 10S
work height max. 900 mm
table width 104 mm
back stop - adjustable ca. 750 mm
oil volume 250 l
total power requirement 22,0 kW
weight 14750 kg
range L-W-H 5250 x 1770 x 3000 mm
** New price ~ 95.000 euros
Furnishing:
- CYBELEC numerical CNC control, model ModEva 10S
* 10"...
High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge.
With this foot swivel bending machine you can bend ...
AUTHORIZED DEALER Company PROD-MASZ.
BENDING BENCH technology Halver,
YOUR competent partner when it comes to BENDING BENCHES
Folding bench RED Plus 2200/1,2 from the company Prod - Masz to try on site and to take away.
You will receive professional instruction on site.
Cgv0dbj0us
Technical specifications:
-Working width 2140mm
- Sheet metal thickness up to 1,2mm
-Non-ferrous metals 30% more sheet thickness
-Bending angle up to 165°
-Bending beam: 15 mm
- Passage: 80 mm
-degree scale
-Stop for p...
Technical data:
Manufacturer : Striebig
Year : 9.93
Type : Standard ll Plus 5220A
Feed : manual
Execution : automatic evasive aluminum slatted frame
Irqikrrnw
Saw carriage locking : manual
dipping saw unit : manual
Swivel adjustment 0 to 90° : manual
Engine power : 4,4 kW
Cutting area : 4600 × 2200× 60 mm
Speed : 5250 rpm
Saw blade diameter : 250 mm
Space requirement : L × H × W 5700×3000×1400
Condition : very good
Location : warehouse
Saw blade : 1 stk
Can be loaded on site wit...
Staff time recording device serial. Z + M type Argus J 30 plus
Fabr.# 8383
Technical data:
Mqpjn
Digital clock (time, date, day of the week)
Accuracy 15 sec / month
Push button ink-jet black
Data backup during power failure 3 months
Weight 4.5 kg
External dimensions approx. 160 x 205 x 128 mm
with
-Scanner
used, ready
Bending machine press brake from Prod-Masz with side cutouts for bending from top to bottom. Thanks to him, you can finish your windowsill. In the machine construction there is a space of 6 cm up and down for curved processing. It is a modern sheet metal bending machine that bends sheet metal from three sides.
Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels
Technical specifications:
- maximum working width: 2200 mm
- Bending performance: up to 0.8 mm (sheet steel)
- ...
SERVICE CENTER HALVER FOR EDGING TECHNOLOGY.
YOUR competent partner in the field of BENDING.
We are your contact for high-quality sheet metal processing throughout Germany.
Appropriate machines can be demonstrated if required, together with competent advice and professional instruction.
We advise you individually - according to your wishes and look forward to your inquiry.
Press brake RED Plus 2200/0,8 on transport rollers with recess 60mm/45° of the company Prod-Masz on site to try out and take...
ronius Selectiva PLUS 8140 D - fully functional
Cornrl9
Device refurbished by specialist service in April 2020.
2-80V
0.1-140A
Wet and GEL drinks
Professional charger - Forklift / battery service.
Formatting / desulfation / revitalisation / deep discharge recovery
Connection 400V-32A
With new UVV test.
Invoice with its own huge VAT
Collection in 84172 Niedererlbach, shipping on request!
No guarantee No guarantee
Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
Joupfubp
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Forklift Battery Charger, Industrial Charger, Forklift Battery Charger, Industrial Charger
Oj007
-Handover: in the current state as viewed
-Housing: self-made
-Power: V/A
-Connection: 220 volts
-Dimensions: 200/405/H400 mm
-Weight: 20 kg
Plus Power Diesel Forklift
Equipment:
Working light, sideshift
Forklift data:
Manufacturer: Plus Power
Year of manufacture: 2022
Operating hours read: approx. 5 hours
lifting capacity: 2500kg
Lifting height: 3000mm (Duplex mast)
Dead weight: approx. 3680 kg
Overall height 207cm
width: 117cm
Engine Quanchai 39 kW
Other:
Cheap delivery possible throughout Europe.
Visits are only possible by appointment.
Gladly we take your equipment / construction machinery in payment.
We wil...
Fendt 1050 Profi Plus Gen 3 with reversing device
Brand: Fendt
Type: 1050
Year of construction: 2023 [unused NEW] IMMEDIATELY AVAILABLE
Engine: 6 cylinder MAN Turbo 520hp
Hours: 3
Stocknr: BN8529
Profiplus
Vario / TMS
65km/h
Air conditioning
Camera 2x
3x screen
Reversing device
EHR
Full LED lighting
Vari grip
GPS/RTK
6 DW hydraulic valves
Load Sensing
Hydraulic brake valve
Hydraulic top link
Air brakes
Isobus
Sprung front axle
Front hitch
Front hydraulics
Front weight 3300kg
Wheel weights 1250...
Rothenberger Rocam 4 plus tube inspection camera, tube camera 30m
made by Rothenberger ROCAM 4 Plus
1 piece of 30 m cable,
1 40 mm camera head
1 CAS charger, EU - RO BC 14/36 - 50/60 Hz 85W Max. 3.0 A
1 db CAS battery, 18 V / 4 Ah;
1 guide ball 40 mm
1 control adapter for the camera head
1 stylus
1 GB SD card 4 GB
1 USB data cable
2 pcs ROCASE 4414
2 fasteners
1 ROCASE transport truck
B3dxmubitb
Properties:
Display size: 10.4 "(Height: 19.81 mm Width: 26.42 mm)
- Easy to use, premium touch ...
CATALOG NUMBER 6651
TECHNICAL DATA
- max width of the workpiece 220mm
- max height of the workpiece 120mm
- 4 spindles:
1) horizontal bottom 220mm 4kW
2) vertical right 120mm 4kW
3) vertical left 120mm 4kW
4) horizontal upper 220mm 5.5kW
- all adjustable spindles up / down, right / left
- diameter of the spindles 40mm
- from above, 4 introducing rollers, toothed, including 2 double ones
- from above, 1 pulling roller, smooth, rubber
- rubber, pulling roller at the bottom
C7h7vlakm
- pneumatical...
Cast T-slot clamping plate
Technical data:
Dimensions approx. L x W x H 2010 x 1080 x 220 mm
thickness 35 mm
ribbing 185 mm
Number of T-slots 3
Dimensions of T-slots 60 / 36 mm
Groove distance 275 mm
Number of clamping holes 8
Gut08pr
Size of the clamping holes 155 mm
Weight approx. 1140 kg
used, in very good condition
Gear motor, electric motor, three-phase motor, electric gear motor
-Speed: 33 rpm
-Power: 0.25 kW
Uk8pmji
-Construction: B3
-Diameter shaft: Ø 20 mm
-Protection class: IP 44
-Dimensions: 450/210/H200 mm
-Weight: 21.2 kg
plate thickness: 6 mm
pressure: t
total power requirement: 4,0 kW
table-size: 1080 x 950 mm
down holder: 2 Stück
height over floor: 900 mm
voltage: 380 V / Hz
Weight approx.: 0,8 t
dimension machine xH: 0,9 x 1,1 x 1,2 m
For notching 90° sheet metal segments, hydraulic
Operation via control panel and foot switch
Qwczl
Angle adjustment by hand via scale
Angle adjustable from 30° to 140
Working area 220 x 220mm
The table has two clamping slots (2x 90° angle) according to DIN 650: a=20; h=20; b=26;...
Olympic Games: Machineseeker sponsors Team Germany
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.