Mobile excavator

LIEBHERR PELLE A316 * Umschlagbagger * Topzustand!

Condition: used, Year of construction: 2004, fuel type: gas, weight max. in kg 2500 kg stroke 3050 mm fork length 1200 mm load centre 500 mm turning radius 2444 mm driving speed 22 km/h guage width vorne 1008 mm guage width hinten 932 mm weight of the machine ca. 3,64 t Djdpfxjr Dg H Eo Aptskt dimensions of the machine ca. 3,8 x 1,25 x 2,25 m

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW Dsdpsfhb Tijfx Aptokt 400 V

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Dksdenkcaaopfx Aptet Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm Dsdjxu Dipjpfx Aptjkt • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Dkedpfx Apoua Tbwstjt Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: orange, first registration: 07/2013, Year of construction: 2012, operating hours: 15,109 h, Equipment: air conditioning, General information Model year: 2012 Serial number: DCH210R5NCEAH2500 Technical information Number of cylinders: 4 Empty weight: 22.600 kg Functional Working width: 300 cm Number of valves: 4 CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Warranty Warranty: From first owner, with full maintenance records, ready to work! - 80% undercarriage - 3 buckets included: 1300mm, 450mm, and 2000mm cleaning bucket - Optionally with 2021 TOPCON 3D SYSTEM Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - 3rd valve - 4rd valve - Central lubrication - Central lubrication system - Climate control - Heater - Radio/CD player - Rotating beacon - Spotlight front Dsdpfx Apey En Ndjtskt - Spotlight rear = Remarks = Case CX210B Tracked Excavator (2012 / First use July 2013) Hours: 15,109 hrs | Weight: 22,600 kg Engine: Isuzu 4HK1X (117.3 kW / 157 HP) Undercarriage: 80% remaining Buckets: 1300mm bucket with teeth, 450mm trench bucket with teeth, 2000mm cleaning bucket Features: Air conditioning, central greasing system Condition: Directly from first owner, including full maintenance history!

Condition: excellent (used), Year of construction: 2011, operating hours: 2,852 h, functionality: fully functional, For sale is a mobile scrap shear, Akros Henschel. The machine is in very good condition and can be inspected at any time. Djdpfxex N Tw Uo Aptokt

Condition: used, functionality: fully functional, Year of construction: 2008, LINTEC CSD 3000 CONTAINERIZED ASPHALT PLANT Year: 2008 Production capacity: 240 to./h. Dksdowq Iv Uopfx Aptot - screen decks: 6 - cold feed bins: 9 - hot stone bin: 42,1 to. - reclaimed filler silo: 45 to. - foreign filler: 2x 50 to. - mixer size: 3.000 KG - burner: 18 MW diesel/heavy oil - 3x bitumen tanks 50.000 liter each - production capacity: 240 to./h.

Condition: excellent (used), functionality: fully functional, gearing type: converter, fuel type: diesel, overall weight: 19,020 kg, first registration: 01/2022, Year of construction: 2021, Equipment: air conditioning, CATERPILLAR 950GC, year 2022, 7062 hours, weight 19020 kg, 169 kW, original paint, no welding. Dksdpfozrhzdox Aptjt

Condition: used, mileage: 1 km, power: 187 kW (254.25 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 44.400 kg Please contact Emal Jaweed for more information Dsdpfx Apjy Iadrstokt