Crawler excavators

Liebherr R900C Litronic

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,800 h, machine/vehicle number: WLHZ1076TZK055270, TECHNICAL DETAILS Operating Hours Operating hours: approx. 7,800 h Chassis Dimensions Undercarriage transport width: approx. 3,000 mm Chassis centerline (Taurus): approx. 2,280 mm Chassis length: approx. 4,600 mm Njdpfx Adjwgm Izjwekt Boom and Stick Hydraulic boom: 3,600 mm Stick length: 3,050 mm EQUIPMENT - Without bucket and without SMP - 20% wear on the running boards - Defective discs - see photos - Full hydraulic hoses present - Taurus condition commensurate with age Further technical data according to the manufacturer - without guarantee Engine Power according to ISO 9249: 95 kW / 129 hp at 1,800 rpm Engine type: Liebherr D 934 S according to Stage IIIA / Tier 3 Fuel tank capacity: 290 l Automatic idle: sensor-controlled Hydraulic system Hydraulic pump: Liebherr variable-displacement swashplate pump Flow rate: max. 300 l/min Operating pressure: max. 350 bar Pump control and regulation: Liebherr Synchron Comfort System (LSC) with electronic maximum load control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control Hydraulic tank capacity: 175 l Hydraulic system capacity: max. 290 l Control system Power distribution: via control spools with integrated safety valves, simultaneous and independent operation of the chassis, swing, and attachment Equipment and swing operation: with proportional joystick levers Travel operation: with proportional foot pedal for travel drive Additional functions: via switches or proportional foot pedals Swing Drive: Liebherr swashplate oil motor with integrated Brake valve and torque control Transmission: Liebherr compact planetary gearbox Slewing ring: Liebherr, internally toothed, sealed single-row ball bearing slewing ring Slewing speed: 0 – 9.0 rpm, continuously variable Slewing torque: 42 kNm Undercarriage Drive: One Liebherr swashplate oil motor on each side of the undercarriage with brake valves acting on both sides Transmission: Liebherr compact planetary gearbox Travel speed stage I: 2.4 km/h Travel speed stage II: 5.0 km/h Tensile force: max. 175 kN Undercarriage: B60L, maintenance-free Track rollers/support rollers per side: 8 / 2 Track shoes: 3-grouser Track tension: hydraulic Dimensions Height: 3.1 m Length with folded boom: 8.7 m Undercarriage height: 1.1 m Digging depth: 6.4 m Reach at ground level: 9.7 m

Condition: good (used), functionality: fully functional, power: 239 kW (324.95 HP), overall weight: 50,500 kg, Year of construction: 2002, operating hours: 11,245 h, machine/vehicle number: CCC00513, 239 kW weight: 50,5 t Nsdpfx Adolhqhmowskt engine complete overhauled tracks as new new cylinder-sealing

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control Nsdpfx Adeullmdewokt * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: new, Variable-speed ISO 40, Nkodpeh Im H Ssfx Adwst Motorized cross table on all axes. 3-axis viewer included. Base with chip tank. Refrigeration system. Led lamp. Mechanical speed indicator. Variable speed motorized axes with rapids. Rail lubrication system with manual pump. Milling capacity with insert cutter : mm 100. Milling capacity : mm 35. Drilling capacity on cast iron with pre-hole : mm 60. Max drilling capacity on steel with pre-hole (s235jr) : mm 24. Spindle taper : ISO40 DIN2080. Spindle sleeve : mm 86. Spindle stroke : 120 mm. Head inclination : +/- 45°. Vertical head rotation : +/- 90°. Head body rotation : +/- 180°. Vertical spindle speed : (2) 60 ÷ 500 |500 ÷ 3600 rpm. Motor : 400 V 50 Hz 2.25 kW. Distance between machine nose and table : 45 - 395 mm. Spindle-column axis distance : 215-450 mm. Table size : 1246 x 230 mm. Longitudinal table displacement : 850 mm. Transverse table displacement : 310 mm. Maximum load capacity : 400 kg. Dimensions : 1680 x 1500 x 2100 h mm. Net weight : 1000 kg.

Condition: new, axle configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, Equipment: ABS, Availability: approx. 4 months after receipt of order Kässbohrer 3-axle low loader wheel wells extendable / extendable NEW VEHICLE Axles / brake system: # BPW axles with drum brake 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x Continental HTR 2 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1,250 mm # Low bed length: 9,240 mm + 3,500 mm extendable # 9 x 2 lashing eyes 6 tonnes in the outer frame # 2 x 2 lashing eyes 6 tonnes in the neck # 4 x 2 lashing eyes 6 tonnes on the low bed # Extra-wide brackets 300 mm extendable # Hardwood floor 45 mm # Color: MB 7350 nova gray or RAL 3020 traffic red # Excavator arm trough Ramps: # Hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 11° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Other: # 4 x over-width signs with bracket for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full trailer support frame at the front # Manual rear support galvanized # 2 inch kingpin Nsdpfogimywex Adwjkt # 24V lighting system Aspöck # E-bike holder with spare wheel ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: used, power: 67 kW (91.09 HP), fuel type: diesel, color: white, overall weight: 8,600 kg, Year of construction: 2013, operating hours: 14,000 h, machine/vehicle number: TW08520624, Particulate reduction system: AC2 CRT 3.8B without grab solid rubber tires mono boom for sorting Nodsxdii Tepfx Adwekt

Condition: used, functionality: fully functional, power: 147.84 kW (201.01 HP), fuel type: diesel, overall weight: 31,500 kg, Year of construction: 2006, operating hours: 8,700 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Kobelco/New Holland E305 Crawler Excavator Year of manufacture: 2006 Nedpfowf H Hujx Adwokt Operating hours: approx. 8,700 Engine power: 148 kW/201 hp Dimensions: 10,320 mm x 2,990 mm x 3,170 mm Weight: 31,500 kg Track width: 600 mm Undercarriage 70% good MONONOOM Demolition grate roof and front We expressly reserve the right to make input errors and mistakes in this offer. The specific agreements in the order confirmation or purchase contract are solely authoritative. More construction machinery and mixing plants on our website

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Nedpfx Aewb Hygsdwekt Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: Nedpfexuh Rdsx Adwokt - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 Nksdpfx Adsrwml Aswst - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.