Trolley, loading hoist

Lift&Drive Lift&Drive 225P SWL 60 KGS

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Nedpfxjhrmlko Ab Uolg Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations. Nledjftm Hrepfx Ab Ueg

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Nlsdpsdmn E Hofx Ab Ujg

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Nedpfxok Rnq No Ab Uelg Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE U.A: (non-exhaustive list): Nsdpfju E El Iox Ab Ujlg Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Nodpfx Absx H A Nbe Uolg • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Nodjwv Hnmspfx Ab Uslg Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Njdjxfka Njpfx Ab Uelg Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 Nedpfx Aopu Anmjb Ujlg - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 960 kg, empty load weight: 960 kg, operation weight: 960 kg, maximum load weight: 150 kg, lifting power: 150 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, suspension: steel, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, head guard, hydraulics, rubber tracks, Excavators GT950 Professional GT950 tracked excavator Model GT950 – 960 kg Introducing the compact and highly functional GT950 tracked excavator – the ideal solution for excavation, construction, and installation work in spaces with limited area. Thanks to its own weight of 960 kg and robust construction, the machine offers stability, precision, and comfort, even under challenging terrain conditions. Its small dimensions and a pivoting boom with a turning radius of only 733 mm ensure that the GT950 performs perfectly on narrow plots, in gardens, and on construction sites with limited space. Engine and Reliability The excavator is equipped with a modern Koop 192F engine that meets the Euro 5 standard, which guarantees low fuel consumption and smooth operation. The reversed cylinder on the boom increases durability and safety during intensive use, ensuring long and trouble-free operation of the machine. Maneuverability and Stability on Terrain Thanks to the extendable tracks with a width of 180 mm and a solid undercarriage with a width of 950 mm, the GT950 offers excellent stability and grip on uneven terrain. The compact overall dimensions (2650 mm long, 930 mm wide, and 2200 mm high) allow for free maneuvering, even in tight working environments, and the ground clearance of the platform of 380 mm enables trouble-free operation on difficult ground. Excellent Performance The impressive operational capabilities include a maximum digging depth of up to 1680 mm, a maximum digging reach at ground level of 2430 mm, and a digging height of up to 2490 mm. The dumping height of 1760 mm makes it easy to load material, and the minimum digging radius of 1340 mm ensures precise work in a limited space. The blade with a lifting range of up to 175 mm and a lowering range of up to 325 mm further increases the functionality of the machine. Technical specifications Model GT950 Weight 960 kg Engine Koop 192F Euro 5 Nedpfx Abszgn Tie Uelg Bucket width 420 mm Reversed cylinder on the boom Yes Joystick Yes Swing arm Yes Extendable tracks Yes Max. digging reach at ground level 2430 mm Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Minimum turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height of the blade 175 mm Max. penetration depth of the blade 325 mm Overall length 2650 mm Overall height 2200 mm Overall width 930 mm Overall length of the tracks 1100 mm Turning radius of the upper carriage 733 mm Ground clearance of the upper carriage 380 mm Width of the undercarriage 950 mm Width of the track 180 mm Height of the track 320 mm