Wash Cruising LEUTENEGGER + FREI AG built in 2000 in Switzerland. The car wash is used for washing and degreasing metal parts. It is adapted for cleaning with chemical agents. Washes and dries elements in one production run. It has a conveyor belt with adjustable speed, drying and washing temperature. It can be installed in an automatic production line.
Technical data :
- conveyor belt width: 0.60 m
- maximum drying temperature: 50 C
- heating: electric 3 x 3.25 kW = 9.75 kW
- power su...
workpiece diameter max. 160 mm
swing diameter max. 160 mm
workpiece length max. 500 mm
control SINUMERIK 840D
turning speed range - workpiece spindle 300 - 3000 U/min
oscillation frequency 100 - 1000 DH/min
rated current 40
weight of the machine ca. 5,5 t
dimensions of the machine ca. 3 x 3 x 4,6 m
4 piece machining stations for machining bearing with pressure shoes
2 pieces CNC oscillating devices with mechanically adjustable stroke 0 - 6mm
pneum. 3-jaw power chuck Ø 160mm
Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 60 mm, dressing wheel 175 x 12 x 32mm, turning speed of the dressing wheel 200 - 2000...
Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm
Industrial washer - technical data:
- external dimensions (LxWxH): 6400 x 4400 x 2800 mm
- usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm
- useful dimensions: chamber II (rinsin...
Eccentric punch press RASTER type 90 NL 4S
High-speed eccentric press
machine No. 105776 Year of construction 1977 / 2006
Compression force 90 ton.
Cutting capacity 2250 mm² at K= 40 kg&mm²
Table surface 1220 x 1080 mm
Failure hole 710 x 200 mm
ram surface 960 x 820 mm
Stands width 730 mm
lateral column width 830 mm (passage between the columns 605 mm)
Strokes 50 to 250 strokes/min.
stroke adjustment 30 to 100 mm
Tappet adjustment range 80 mm
Installation height with stroke top / bott...
Heavy duty pallet racking REDIRACK for 84 pallet places
with grid shelves
rack length in total approx. 19,7 meter
Shelf height: 466 cm
Shelf depth: 145 cm
Shelf width: 270 cm
Bay load: approx. 4,500 kg
Shelf load: 1800 kg
Load capacity per pallet position: approx. 600 kg
8 pieces upright frames (shelf uprights)
42 pieces support beams, cross beams 270 cm beam length
42 pieces gratings (146 x 123 cm)
Due to the greater shelf depth, normal EUR pallets do not stand on the support beams....
Container content: 400 l
Flow rate: max. 60 l / min
Filter fineness: greater than 0.003 mm
Connected load: approx. 2.0 kW (400 V / 50 Hz)
Dimensions W x D x H: 1000 x 1000 x 1370 mm
Weight: approx. 200 kg
Description: Suitable for cleaning cooling oil used for grinding of carbide metals.
1 used CNC laser cutting machine BYSTRONIC BYSPRINT 3015 with 2200 W CO² laser
Technical data laser cutting system:
Nominal sheet size:
x = 3000 mm
y = 1500 mm
x = 3048
y = 1524 mm
z = 70 mm
itioning accuracy axially parallel 100 m / min
itioning accuracy simultaneously 140 m / min
maximum axis acceleration 8 m / s²
kpiece weight 750 kg
Machine weight 12000 kg
5 "and 7.5" cutting heads
Cutting gas consumption depends on the material
Operation via panel with 15 "touchscreen, keyboar...
New belt grinder BERNARDO type MS 150x2000 SBandbandband width 150 mmBand length 2000 mmBelt speed 29 m/sec. speed 2800 rpm.Motor power 4 KW = S1 at 100펥tzanschluß 400 Volt, 50 Hz, 16 Ampere CEE-plug Contact disc/drive disc Ø 200 x 150 mm- Surface grinding table 150 x 460 mm with graphite underlay- hinged metal cover over the surface grinding table Contact disc with polyurethane coating- safety switch with motor protection- and undervoltage release with motor protection- and undervoltage release...
Max. workpiece diameter: 1250 mm
Max. distance between mounting surfaces of lower and upper die: 900 mm
Max. stroke of upper approx.: 600
Hardening capacity of machine per hour approx.: 1200 kg/h
Workpiece height: 250 mm
Clamping force: Centering pin: 80 KN
Clamping ring: 210 KN
Dimensions of the machine without accessories:
Machine weight without accessories: 14.000 kg
Electric oven with controlled atmosphere:
REALISTIC CAE 13.15.8 / 10
current capacity:250 kVA
workpiece dia.:- mm
cross cut max.:- mm²
Max. friction force:81 kN bei 100 bar
Min. friction force:5,7 kN bei 7 bar
Max. upsetting force:120 kN bei 148 bar
Max. spindle speed:2.500 min-1
Max. slide stroke:400 mm
Spindle drive power:147 kW
(frequency controlled three phase motor):-
Electrical supply data:-
Nominal voltage:400 / 50 V/Hz
Total connected load:250 kVA
Medium power requirement:50 kW
Medium power:250 A
Fuse:630 A träge
Cable cross section:240 mm2
Production drilling machine
make no. 449 year of construction 1995
drilling capacity in steel ST 60 25 mm
drilling capacity in cast iron GG 20 30 mm
spindle admission SK 40 - M16
throat 280 mm
drilling slide stroke 500 mm
Spindle distance max. 685
spindle distance min. 185
table size 490 x 400 mm
spindle speed 2000 rpm
autom. feed 224 mm/min.
rapid traverse 4,5 m/min.
motor power feed 0,18 kW
motor power rapid traverse 0,75 kW
motor power drilling spindle 1,5 kW
Mains connection 400 V...
The CIMAT CMT 30 V2 balancing machine was manufactured in 2015 in Poland.
Basic technical data:
- software: ROTOTEST
- component weight: 0.2 to 30 kg
- maximum rotor diameter: 400 mm
- maximum rotor height: up to 200 mm
- compressed air pressure: 0.6 MPa
- balancing machine dimensions: 1200 x 1200 x 1500 mm
- control panel dimensions: 600 x 600 x 1800 mm
- weight: 500 kg
min/mx honing dia 40 – 105 mm, min/max honing stroke 5 – 500 mm,honing length 300 mm, no. of honing spindles 4, tool changer, 2 pieces 2 x 12 positions, spindle speeds 100 – 2.000 rpm, L x W x H, ca. 8,5 x 6 x 4 m / 8,5 x 9 x 4 m, weight, ca. 28 tons
Stitch grinding machine MICHAEL DECKEL Type S0E
Fabr. No. 70-1951 1970 built
Grinding wheel diameter 100 mm
Grinding wheel speed approx. 4750 rpm.
Engine power 0.55 kW
Mains connection 380 volts, 50 Hz
- collet device for collet chuck 355E
- with 4 colraces of 1.0 - 2.0 - 14.5 - 11.5 mm
- integrated dust extraction with radial fan and filter
- Table design
Space requirement L x W x H 650 x 500 x 380 mm
Weight 70 kg
Dot peen ProPen P3000 27-06-304
Delivery time: immediately
L x W x H: approx. 400 x 500 x 600 mm
Weight: approx. 30 kg
- 6 embossing needles with different angles for steel & aluminum,
- Stand-alone with keyboard (can be programmed directly on the machine), alternatively also via the enclosed data cable
- writing field 200x200mm; Height adjustable 320mm; Tubes can also be marked up to a letter height of approx. 10mm
- Folder with documentation ...
min/mx honing dia 40 – 105 mm, min/max honing stroke 5 – 500 mm,honing length 300 mm, no. of honing spindles 3, tool changer, 2 pieces 2 x 12 positions, spindle speeds 100 – 2.000 rpm, L x W x H, ca. 8,5 x 6 x 4 m / 8,5 x 9 x 4 m, weight, ca. 28 tons
pulling capacity 25 t
working area Rohr 12 - 80 mm
working area Stab 12 - 50 mm
drawing speed stufenlos 2 - 60 m/min
return speed max. 120 m/min
drawing length max. 15 m
control Siemens S7
main drive 200 kW
voltage 400 V
control voltage 24 V
Precision surface grinding machine ABA Type FFKFabr. No. 861 Year of construction 1968Grinding range 370 x 150 mmMechanical magnet 350 x 150 mmGrinding wheel diameter 225 mmGrinding wheel width 25 mmGrinding wheel speed 2800 rpm.Motor power 1.8 kWGrinding height (magnetic surface - spindle centre) max. 350 mmm- manual table movement via hand crank- manual cross adjustment via hand wheel fine adjustment- manual depth adjustment via hand wheel fine adjustment- depth adjustment with feed ratchet fo...
Workbench, workbench, assembly bench, electrician's workbench
-with: electrician test board
-Width: 1500 mm
-Depth: 750 mm
-Height: 800 mm
-Number: 10x pieces available
-Price: per piece
-Weight: 100 kg
capacity in bar:
total power requirement: kW
operating pressure: 11 bar
content: 2000 l
weight of the machine ca.: 0,443 t
dimensions L x W x H: 1,28 x 1,33 x 2,7 m
Pressure tank standing on three feet
- surface galvanized, test mark CE 0044
- boiler size (without foot) Ø 1150mm x H: 2000mm
- equipped with automatic steam trap manufacturer BOGE, type K2, operating pressure 16bar, flow rate 2 liters / hour, temperature min./max .: + 1 ° C / + 60 ° C
- 4 connecting pieces (3x 3 inch...
BINNS AND BERRY L1000 DOUBLE GAP BED LATHE
MAKE BINNS AND BERRY, MADE IN ENGLAND
MODEL L1000 DOUBLE GAP BED LATHE
SWING OVER GAP 1,500 mm
SWING OVER BED 1,000 mm
SWING OVER CROSS SLIDE 850 mm
BETWEEN CENTRES 2,500 mm
SPINDLE BORE 100 mm
SPINDLE SPEED 50 – 1200 rpm
TAILSTOCK 6 MORSE TAPER
RAPID TRAVERSE & SCREWCUTTING
DIXON TOOL POST
1.5M FACEPLATE CHUCK + JAWS
PRATT 4 JAW CHUCK
2 X 3 POINT STEADIES + 1 TRAVELLING STEADY
Breitenbach STD R/4
drawing speed 2,0 - 8,0 m/sec
600 mm dia.
600 mm dia.
600 mm dia.
600 mm dia.
direct current motor je Block 22 kW / 440 V
weight of the machine ca. 10 t
CNC punching and nibbling machine TRUMPF type TC 500 R = TRUMATIC 500 Rotation
make no. 40715 year of construction 1995
Punching power 220 kN
punching diameter max. 76,2 mm
sheet thickness max. 8 mm
X Working range without repositioning 2500 mm
Y Working range max. 1300 mm
X Speed max. 90 m/min
Y Speed max. 60 m/min
Speed simultaneous max. 108 m/min
Stroke sequence max. 510 strokes/min.
Compressed air requirement 6 bar
mains connection 400 Volt, 50 Hz, 19 kVA
- automatic tool changer with 18 too...
ELECTRIC PIPE BEVELLING MACHINE
Machine is custom made by LEFON to accommodate working with larger pipes and is based on their ET24 model.
Working range inside diameter ⌀510-840mm
Pipe wall thickness up to 20mm
Rated power 2,30kw
Rotation speed 10rpm
Included cutter tools:
0 degree cutting tool
30 degree bevelling tool
37.5 degree bevelling tool
Never used, installed on pipe once for demonstration purposes.
Heating capacity: 3600 kcal/h
temperature: Wasser/water 110 °C
Voltage: 220 V
operating pressure: 10 kp/cm²
total power requirement: 36 Watt
Total weight, approx.: 38 kg
2 pieces available!
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.