Scissor lifting table

Lifting table

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Kdjdpeq Hgg Uefx Aadsw ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: new, Year of construction: 2022, Protec welding rotary table 10000 Kg load capacity Speed infinitely variable 0,05 - 0,5 rpm Kdsdpfx Aasd An Aiedow hand and foot remote control height 650mm diameter 1800mm

Condition: used, Wood chip boilers Schmid UTSR 900 and UTSR 240, output 900kW + 240kW, year of manufacture 1997, moving grate combustion system (suitable for lower fuel quality), including pneumatic cleaning for 900kW, including ash removal system into container, including multicyclone separator, including feed screw, including walking floor with hydraulic unit - 2 pieces push rods 11m length, 3m total width, including control system, heat exchanger of 900kW unit is leaking, including 2 pieces of 5000l buffer tanks, including chimney systems, disassembly must be carried out by the buyer! Including system documentation! More pictures on request! Heating station layout available! Kdjdpfovyrwpox Aadjw

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors Kdjdpfxsqy E Rls Aadjw feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Full bottom floor for waste handling Kedpoikvl Refx Aadedw All electrical cabinets and hydraulics

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm Kjdpfxjb Nrbne Aadedw hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system Kdodpfx Aaewya Syodew with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Year of construction: 2002, condition: like new (used), L x W x H: approx. 12,1 x 3,0 x 3,25 m Volume: 55 cbm capacity: approx. 150 m³/h 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t., Kdjdpfxsllvpzs Aadew

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with Kodpjd D D Hlefx Aadsdw plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm Kdedpolu D Tfsfx Aadew 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar