Stand-on stacker

Linde L14AP

Condition: used, machine/vehicle number: P21173L02098, Year of construction: 2022, operating hours: 7,209 h, load capacity: 1,400 kg, lifting height: 1,844 mm, fork length: 1,150 mm, empty load weight: 1,400 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 1,844 mm Fork length: 1,150 mm MACHINE DETAILS Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Battery voltage at rest: 25.5 V Dimensions Dimensions (L x W x H): 2,100 x 800 x 1,490 mm Dead weight: 1,400 kg Service valid until: 09/2027 UVV certificate valid until: 09/2027 Operating hours: 7,209 h EQUIPMENT Former Linde full-service unit Folding platform Charger All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Ljdpoz Dfq Defx Apdeag Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. In case of non-timely collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 464

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. Lasdpfx Apewgbw Redeg 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 2004, operating hours: 9,288 h, load capacity: 1,400 kg, lifting height: 5,300 mm, fuel type: electric, mast type: triplex, construction height: 2,005 mm, empty load weight: 1,600 kg, mileage: 9,288 km, Electric three-way reach truck Brand: Linde Year of manufacture: 2004 Capacity: 1,400 kg Lifting height: 5,300 mm Lodpfx Apjz Ay Idsdsag Mast height: 2,005 mm Battery with charger Watch the video on YouTube

Condition: good (used), Year of construction: 2002, operating hours: 13,833 h, load capacity: 1,400 kg, lifting height: 5,300 mm, fuel type: electric, mast type: triplex, construction height: 2,005 mm, empty load weight: 1,500 kg, mileage: 13,833 km, Electric triple-mast stacker, brand Linde, year of manufacture 2002, capacity 1,400 kg, lifting height 5,300 mm, lowered height 2,005 mm, including battery and charger. Watch the video on YouTube. Lasdpfx Aez Ay Epspdeg

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Laedpfjvvi Rfox Apdsg

Condition: used, Year of construction: 2009, operating hours: 943 h, lifting height: 1,970 mm, fuel type: electric, fork length: 1,400 mm, total height: 1,400 mm, total length: 1,900 mm, total width: 2,050 mm, color: red, Empty weight: 2.000 kg Lifting capacity: 1.000 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: W4X131Z01284 - Operating hours: 943 - Lifting capacity: 1000kg - Lifting height: 1970mm - Fork length: 1400mm - Fork width: 570mm - Drive: Electric - Battery information: Lasdpjzgtyzjfx Apdog - └ Brand/Type: 4 PZV 440 - └ Battery year of construction: 2023 - └ Capacity: 440Ah - └ Battery voltage: 24V - └ Tray length [mm]: 310 - └ Tray width [mm]: 790 - └ Tray height [mm]: 61 - Transport dimensions: 1900mm x 2050mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,685 h, load capacity: 1,400 kg, lifting height: 2,844 mm, fuel type: electric, mast type: simplex, construction height: 1,800 mm, drive type: Elektro, High-lift pallet truck Mast type: Standard Condition: Ready for use and fully functional Laodpfozuhhvsx Apdsg Technical condition: New Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Battery voltage: 24V Battery type: PzS

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lsdpfxsiidm Ns Apdoag Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,786 h, load capacity: 1,400 kg, lifting height: 5,316 mm, free lift: 1,745 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, drive type: Elektro, Pedestrian stacker Mast type: Triplex Lodpfx Apey Trpwedsag Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,101 h, load capacity: 1,400 kg, lifting height: 2,844 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, drive type: Elektro, Stand-on forklift Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Lasdoxybv Repfx Apdsg Initial lift,

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Lasdpfeidqr Ssx Apdsg Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 11,091 h, load capacity: 1,400 kg, lifting height: 4,266 mm, free lift: 1,379 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, drive type: Elektro, Pedestrian stacker Mast type: Triplex Condition: Ready for use and fully functional Lodpfx Aszc A R Nepdeag Technical condition: good Battery Volt: 24V

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 11,916 h, load capacity: 1,400 kg, lifting height: 4,266 mm, free lift: 1,379 mm, fuel type: electric, construction height: 1,915 mm, drive type: Elektro, Reach truck Condition: Ready for use and fully functional Technical condition: good Ledpfozf Tlzox Apdoag Battery voltage: 24V

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table Laodpfjmghawox Apdeg -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,738 h, load capacity: 1,400 kg, lifting height: 5,316 mm, free lift: 1,745 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, drive type: Elektro, Pedestrian stacker Mast type: Triplex Condition: Ready for use and fully functional Laodpfoy Trp Dex Apdjg Technical condition: good Battery Volt: 24V