Flushing pump

Lisec

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: Isdpey Swfzjfx Am Deat - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 The machine can be seen at our warehouse in Hofkirchen/Austria on appointment.

Condition: used, • Load capacity 350 kg Iasdpfxsxnvq Ej Am Dst • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, total length: 8,500 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2025, consisting of following components: - RTVN-11/25VFE, inlet conveyor sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles, new transport chains on inlet, outlet and take-off section Iasdpoy Sv Uzofx Am Det - DOS-1PSD, mixing and metering station for Polysulfide, completely overhauled The machine is in very good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1DS/25, year 2001, working direction left/right, consisting of following: - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001, completely overhaule prior delivery Will be sold as described above, EXW our warehouse in Hofkirchen/Austria. No further guarantee or warranty given. Iajdjy Sv Unjpfx Am Dst Available from stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane Iasdpfx Aoxtyvpem Djt There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Condition: good (used), Year of construction: 1990, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine VHW-25V8, year 1990, working direction left to right, consisting of following: Iodpfx Asy Sv Ubom Dsat - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 All machines are in good working order and can be seen in our warehouse in Hofkirchen/ Austria on appointment.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 Availability now from our stock in Hofkirchen/Austria Ijdpfey Sv Twjx Am Deat

Condition: good (used), Compact storage system with 12 stations. Load capacity per shelf: 2700 kg. Glass support: 280 mm. Length: 5900 mm, depth: 3600 mm, Height from floor to glass shelf: 290 mm, Height from glass shelf: 2040 mm, Iasdpfxsu R Rmue Am Det Total height from floor: 2330 mm.

Condition: good (used), Year of construction: 2007, functionality: fully functional, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). Iaodpfsy Sv Tkjx Am Djt The brushes are still good for at least 1-2 years depending on production. The machine was used in small production only. Since it has some rusty spots we can offer it for a reasonable price. The machine is in working order and will be available from our stock in Oroshaza/ Hungary.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: RTVN-27/25MZ, measuring section for gas filling press FPS-36/25US, gas filling press for Argon Iaodey Sv Smopfx Am Dst RTVN-32/25ST, outlet conveyor 1 of gas filling press RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press The line machine was working until dismantling date and will be available from current location end of May 2026.

Condition: good (used), Year of construction: 1994, Molecular filling system / diagonal filling weight 520 kg Iedpfeir Efuox Am Djat

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 Iaedpfx Asy Sv Sgem Dst – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. Iaodpfx Amsy Sv R No Dst power: 3N/PE 400V 50Hz Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment.

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Iedpfsrhkp Eex Am Deat Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 11,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, overall weight: 5,000 kg, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: Iajdpfxsy Sv Rvj Am Det - APKV-4/25, combination of inlet conveyor of sealing robot, with glass and frame measuring device and automatic 4-lane kork application machine, year 2005 - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for Polysulfide (base 200 litre, catalyst 20 litre) and Silicone (base 200 litre, catalyst 20 litre), year 2005 The machine will be sold as described above, EXW our client's factory in Germany. No further guarantee or warranty given. Available end of May 2026