Surface Grinding Machine

LODI T 250-80 CN

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Gujdpsuyk N Iofx Anxsb

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Gujdoyxn Dnopfx Anxsb

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm Godpfx Anotycg Ssxsub table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 195125, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, overall weight: 5,040 kg, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling capabilities, as well as integrated B- and Y-axes, this machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. Gujdjyir I Rjpfx Anxob The machine was built in 2007 and is equipped with the powerful MAZATROL Matrix control unit, allowing for both conversational and ISO programming, and offering modern features for efficient and productive manufacturing. Technical Data at a Glance: • Travel range: 410 mm on the X-axis, 140 mm on the Y-axis (±70 mm), and 570 mm on the Z-axis. The B-axis features a swiveling range of 225°, enabling complex five-sided machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. • Maximum turning and swing diameter: 545 mm each. • The main spindle reaches speeds up to 6,000 rpm with a power output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with approx. 5.5 kW of power output, making it ideal for milling, drilling, and tapping operations. • The machine is equipped with a tool changer (included), allowing a maximum tool length of 210 mm, as well as a KM tool holder system which ensures high rigidity and fast tool changes. Equipment includes: • Chip conveyor • “Tool Eye” tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: excellent (used), Grinding length without magnetic table: 1500 mm Gusdpfowlh Adox Anxjb Maximum grinding width: 750 mm X-axis longitudinal travel: 1520 mm Y-axis transverse travel: 650 mm Z-axis vertical travel: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 mm Accessories: Braillon magnetic table 1000 x 500 mm Elcon 3 electronic control

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, total width: 1,990 mm, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 31i-WB, number of axes: 5, Wire EDM machine manufactured in 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha-C400iB machine we have for sale. Contact us for further details. • Workpiece capacity: max dimensions 730 × 630 × 250 mm; max workpiece weight 500 kg • Axis travel: U/V 120 × 120 mm • Machining capability: max taper angle ±30°/80 mm; minimum drive increment 0.0001 mm; wire diameter Ø0.10–Ø0.30 mm; max wire spool weight 16 kg • Controller: FANUC 31i-WB; part program storage 4 MB • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Thin wire option: wire diameter Ø0.05–Ø0.07 mm • Automatic front door option: max workpiece dimensions with auto door 730 × 585 × 250 mm • 45° die guide option: max taper angle ±45°/40 mm • 30 kg wire feed unit option: max wire spool weight 30 kg • Installation conditions: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable terminal size 8-5; power consumption 13 kVA • Air supply: 0.5–0.7 MPa; 100–110 L/min (minimum 120 L/min with thin wire option); regulator-side coupler mounting screw Rc1/4 • Environment: 15–30°C (recommended 20 ±1°C for high-precision machining); oil-mist-free and dust-free; humidity ≤75% RH • Grounding: Type C; max grounding resistance 10 Ω; must be grounded independently from other machinery • Shield room requirement: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed Gedpfoypma Isx Anxeub

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 42L09420, Hankook Protec 9NC x 5000 CNC Lathe with Fanuc 32i Control and large spindle bore. MACHINE CONSTRUCTION & FEATURES  Heavy One Piece Cast Iron Bed Construction  Heavy Duty Hardened & Ground Solid Slideways  2 Step manual Gear Change  Heavy Duty Tailstock MACHINE CAPACITIES Swing Over Bed Ø 950 mm Swing Over Carriage Ø 630 mm Chuck Size Dia. Ø 32” Distance Between Centres 5000 mm Load Capacity Between Centres 5000 Kgs SPINDLE Speed 2 -630 Rpm Spindle Bore Ø 254 mm Spindle Nose A2-15” Speed Range Manual 2 Step Centre taper MT #6 Carriage Toolpost Automatic V8 Tool Size 32 x 32 mm X Axis Travel 535 mm Z Axis Travel 4845 mm Guedswcq Tmjpfx Anxsb X Axis Rapid 4 M/min Z Axis Rapid 6 M/min TAILSTOCK Quill Diameter Ø 180mm Spindle Taper MT #6 Max Quill Travel 250 mm BED Width 630 mm Length 6715 mm MOTORS Spindle 30/37 Kw Feed X 1.8 Kw Z 4.2 Kw POWER SUPPLY Electrical Supply 415V, 3Ph, 50Hz DIMENSIONS & WEIGHT Length 7470 mm Width 2205 mm Height 1890 mm Weight 10280 Kgs STANDARD MACHINE FEATURES • Fanuc 32i-A CNC Controller • Centre MT #6 • 4 Jaw Independent chuck • Automatic Spindle Shifting • Built in Live Tailstock Spindle • Coolant System • 2 Speed Tailstock Spindle • Work Light • Main Drive Motor & Elect equipment • Centre Sleeve • Chuck Cover Full Rear Guard 5000 between Centres 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) Steady Rest(Roller Jaw) Φ250mm - Φ450mm Steady Rest (Roller Jaw) Φ450mm - Φ650mm Live Centre MT #6 Automatic Index Turret Electric V8 in lieu of manual H-4 3 Off OD Tool Holders 3 Off Boring Tool Holders Φ63mm 2 Off Facing Tool Holders Boring Bar Device Ø 150mm (Bar Excluded) Chip Conveyor 5000 Mm Transformer CE Specification Spindle Motor Upgrade 30/37 Kw Fanuc Option A (as detailed below) 1st Spindle Orientation Dynamic Graphic Display Continuous Threading Custom Macro B Extended Part Program Edit Tape Memory 320M Inch/Metric Conversion Manual Guide i Playback Programmable Data Input Run Hours & Parts Counter Tool Offsets 32 Pairs Variable Lead Threading Graphic Function Spindle Positioning Program Restart External Data Input

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Gjdey Hrpdepfx Anxjub Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment. Translated with (free version)

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks! Gusdpfx Aeyk R Dyenxeb

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) Godpsw U Uh Dsfx Anxsub I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,