Metal band saw

Mössner SM/400

Year of construction: 1965, condition: used, roll diameter 400 mm throat 390 mm Fodpfx Agolp U Nis Rspb workpiece height 240 mm saw band length 2980 mm table surface area 500x600 mm weight of the machine ca. 350 kg dimensions of the machine ca. 650x1100x1700 mm

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Fjdpfxsgf H Saj Ag Ropb Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Fodpfx Agoxdwbko Rspb Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: new, Year of construction: 2025, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Cutting range in mm round/flat 90° 325/500 x 300 Fodst D Azcjpfx Ag Rjpb 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg Fsdpoqvp Nksfx Ag Repb

Condition: used, Year of construction: 1990, cutting diameter 320 mm saw band length 4600 x 32 x 1,1 mm 500 x 320 mm cutting speed 16 - 96 m/min Fpsdjwu Hihspfx Ag Rob total power requirement 2,1 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 1,4 x 1,8 m Semi-automatic band saw - Miter max. 45° - Micro-spray device

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm Fedpfexab Hcjx Ag Repb engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm Fpodpfxoxabpwj Ag Rsb capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, Year of construction: 2025, cutting width (max.): 2,500 mm, cutting height (max.): 1,500 mm, warranty duration: 12 months, power: 11 kW (14.96 HP), STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE Fpjdpfxjvvcpzs Ag Rsb - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1500 CAPACITY SQUARE (MM) 1500X1500 CAPACITY RECTANGULAR (MM) 1500X2500 SAW SIZE (MM) 80X1.6X15650 SAW SPEED (M/MIN) 20 – 80 MAIN MOTOR (KW) 11 HYDRAULIC MOTOR (KW) 2.2 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 600 MACHINE DIMENSIONS (MM) 7500X2150X3440 WEIGHT (KG) 21000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION

Condition: new, The HB 380 L is a semi-automatic horizontal band saw in the Horizontal Mitre Cutting Bandsaws category and belongs to the Semi-Auto Bandsaw product group. Designed for heavy cutting applications, the HB-L series excels in precision cutting of steel, cast iron, and other materials. Its robust dual-column construction minimizes vibrations, enhancing both cutting speed and accuracy. You will find features like a finely adjustable saw blade feed, a continuously adjustable saw blade speed, and a swiveling workpiece clamping system contribute to its outstanding cutting performance. With cutting capacities of 380 mm for round and 520x380 mm for flat materials, the HB 380 L is equipped with reliable hydraulic clamping, a removable coolant reservoir, and an advanced hydraulic saw frame feed system that supports variable feed speeds. To maintain efficiency, the machine features a pressure gauge for optimal saw blade tension. Invest in this durable and precise machine for your industrial saw needs and order online to enhance your cutting operations with KNUTH. Fodpowhi Sxsfx Ag Rspb