MEDIUM CUT

MÜLLER MARTINI FÜR MÜLLER MARTINI 305

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Format trimmed max 500x315 mm min 148x105 mm Power max 14000 c/h min 2000 mm Gtedobg Hnhjpfx Ah Hst

Condition: ready for operation (used), Size: Gtodpfx Aed N D Nveh Hot max 750 x 1.050 mm min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Weight: 850 kg (approx.)

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Gtjdpfx Ahoh T Dhqs Hot

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Gtsdotqtk Aepfx Ah Hot Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Gtedpfxod Ert Ss Ah Hot External diameter 2.250 mm Length conveyor belt 48 m Equipment • drying tower downward • infeed left at the top

Year of construction: 1993, condition: good (used), Built in: 1993 Size: max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: max 6.600 c/h Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter • external knife changing device • 2 set of knives • equipment for changing the format: Godpfx Ajdycmdjh Hjtt • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors. Gedpfx Ahoh U A I Re Hstt

Condition: good (used), Year of construction: 2003, SAPC Semi -Automatic Plate Change PQC Console AMR (Automatic-Make-Ready) PDC-S: Print Density Control Plate Cylinder Cocking Technotrans Cooling Device Washers IR Dryer Powder Sprayer Godpfox H Ix Uox Ah Hott CIP3 Chromed Plate Cylinder Impression Account: 125 Mio.

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm Gtoded Eg Tuepfx Ah Hjt min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Gtedpfxok Abbbs Ah Hst Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics