Müller Martini Hotmelt spine glue unit (2020)

Müller Martini Glue unit

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Bwedotyy Sfjpfx Agksi Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: used, Year of construction: 2004, Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Bedpfx Agsm D Ukiekjwi

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizon BQ-260 Book Binding Machine Maximum Formats: 320mm x 320mm, Minimum Formats 75mm x 75mm. Cover Format with Manual Feed: 320mm x 650mm, with Automatic Feed: 320mm x 470mm. Cover Thickness: 1 - 40mm. Bjdpevzp Twofx Agkowi

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: R6, working width: 420 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 500 kg, input current: 16 A, compressed air connection: 5 bar, input frequency: 50 Hz, Spiral forming and binding machine for metal spiral binding of books. Forms and inserts wire coils into pre-punched notepads and diaries. Uses plain or coloured nylon-coated steel wire. Equipped with 16mm diameter forming mandrels. ( other sizes available on request) Range available: 6.- 22mm Ideal for notepads and student's diaries. Auto-eject with exit conveyor. Production speed up to 500 items per hour. Bsdpfx Agotltr Sjkowi Power requirements: 400 VAC 1 Kw Compressed air: 5 bar

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) Bwedpfx Ageuf Sy Aokoi - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, Hi we can offer KBA 142-6-LV year 1994 Bsdpewqz Drjfx Agkjwi Varnishing tower after 5th units, Baldwin cooling device Blanket Weko T 77 Spray powder Non-stop feed and delivery Plate bender IR and hot air dryer in delivery CX device for cardboard without compressor Semi-automatic plate change Delta system on Varidamp

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Bedpfx Asl Txw Hjgkswi Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: new, Year of construction: 2025, HEAD AND TAIL BAND MACHINE MAGRAF KV-10 PLUS Bsdoh S Uv Eopfx Agkowi

Condition: new, Year of construction: 2025, functionality: fully functional, cutting width (max.): 1,600 mm, insertion height: 50 mm, cutting length (max.): 2,500 mm, input current: 30 A, input voltage: 400 V, Equipment: documentation/manual, Akonda.pl - Your Official iEcho Partner. Bjdpfjxfrh Usx Agkewi We offer the highly versatile and powerful iEcho TK4S, the ultimate solution for automated cutting across multiple industries. Its modular design allows for perfect customization to meet your specific production needs, from sign & display and printing to packaging, textile, and industrial manufacturing. The iEcho TK4S is engineered for precision, speed, and reliability. Its robust construction and advanced features ensure high-quality results on a vast range of materials. As an official iEcho service partner, Akonda.pl provides comprehensive support, including professional installation, operator training, and ongoing technical service to keep your operations running smoothly. Key Features of the iEcho TK4S: Modular Tool Head: Can be equipped with up to three tool modules simultaneously, allowing for complex jobs without stopping. A wide range of tools is available: - Electric Oscillating Tool (EOT): Perfect for cutting soft and medium-density materials. - Pneumatic Oscillating Tool (POT): An air-driven tool with an 8mm stroke for cutting hard, dense materials up to 110mm thick. - Universal Cutting Tool (UCT): For high-speed through-cutting of materials up to 5mm. - Creasing Tool (CTT): Delivers perfect creases on cardboard and corrugated materials. - High-Speed Router (RZ): With a speed of up to 60,000 RPM, it can mill and engrave hard materials like acrylic and PVC. High Performance: Maximum cutting speed of 1500 mm/s and an accuracy of ±0.1mm. Durable Construction: Built with a lightweight and strong aviation aluminum frame. Automation Ready: Can be equipped with automatic feeding and collecting systems for 24/7 production. Intelligent Camera System: Ensures precise positioning and accurate contour cutting for printed jobs. Available from Stock & Full Service Support! At Akonda.pl, we understand the importance of fast delivery and reliable support. IN STOCK NOW: We have a permanent stock of iEcho TK4S machines in the popular 2500 x 1600 mm size, ready for immediate delivery. OTHER SIZES AVAILABLE: Looking for a different dimension? Contact us to inquire about other available sizes and custom configurations. We can supply the full range of iEcho models. PROFESSIONAL SERVICE: Our team of factory-trained technicians provides expert installation, training, and warranty/post-warranty service across Europe. Why Choose Akonda.pl? Authorized iEcho Service Partner: We are your direct link to professional support and genuine spare parts. Largest iEcho Warehouse in Europe: Minimizing lead times and ensuring you get your machine faster. Proven Expertise: We have extensive experience in implementing cutting solutions for a wide variety of industrial applications. Contact us today to receive a customized offer, schedule a demonstration, or discuss how the iEcho TK4S can revolutionize your production.

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors Bodpfowka S Isx Agkowi - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim