Cable Granulator,Cable Granulating Machine

GRS Feinwerkmechanik GRS KG 150

Condition: new, functionality: fully functional, 8X4 (2.4 X 1.2M) DOUBLE DECK SCREEN 2.2KW DRIVE MOTOR WEIGHT 1800KG LENGTH 5000MM WIDTH 2000MM Rcjdpfx Aoin E Hqjgujb HEIGHT 2300MM 4.5M FINES CONVEYOR 3KW GEARBOX DRIVE GASOLINE 8.5KW ONBOARD GENERATOR AGRI OR ROAD LEGAL WHEELS Worldwide delivery available, dealer enquiries welcome,

Condition: used, SINGLE SHAFT SHREDDER WEIMA Rcodpfetqd Ndox Agueb MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: ready for operation (used), 🔧 Key Specifications Rodswnx Uispfx Aguscb Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. Rodeqabm Espfx Aguecb It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: used, Eldan Granulator HG129 Rjdpfst Uyvrex Aguocb

Condition: used, No. 10028 Cable granulation plant FRS BK 60 Used According to our customer, the machine is fully functional and can be inspected and tested on site Cable granulating system for up to approx. 1000 kg of cable per hour (according to our customer) Motor and blades were renewed in 2025 Rotor dimensions 610 x 500 mm 14 blades Motor power 45 kW Incl. magnetic conveyor belt Cylinder size 400 x 120 mm Motor power 1.5 kW Incl. sieve with two outlets Motor power 0.35 kW Installation dimensions approx. 7000 x 6000 mm LW Transport dimensions approx. 6000 x 2400 x 2600 mm LWH Weight approx. 6000 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Rcedpfxexwdnds Aguob Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Rsdpfx Aovf E Avsguscb Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2024, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Powerful, robust machine at an affordable price from Josan & Söhne Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Alligator scissors large: ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here PRICE ON REQUEST Rsdep E Ehqspfx Aguscb Pictures/equipment may vary. Errors/changes excepted

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Rcedjtu U Ebepfx Agujb

Condition: new, Year of construction: 2022, Layout: Shears Attachment suited for: Construction machines Metal shear / steel shear for steel cutting for excavators Rcodpopa Rpbjfx Agueb It has been designed for demolishing iron structures and for cutting different structural steels It has some unique properties Replaceable cutting knives Upper head and slewing ring Specially developed hydraulic cylinder The double hose connection For detailed information and price, please contact us