Controls for storage lifts and paternosters

LTG-StoreControl

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW Dedpfjwwwqhox Addjwf feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 250 kg, load capacity: 16 kg, We at Binici MB GmbH also have other industrial robots in-house. All our robots are fully functional (with complete accessories). Dwodpfjv Diuyox Addef We are at your disposal for good advice

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec Dwoderu A Atopfx Addsf - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: new, Year of construction: 2025, Spray-flood cleaning plant - Parts cleaning plant Washing (600 litres) + rinsing (430 litres); electrically heated; Cleaning process can be carried out by spraying, flooding (injection flood cleaning) and ultrasonic action. Dodpfx Adshu Sg Iedewf basket can stand, swivel or rotate during the cleaning process (preselectable via the program) Drying with hot air and vacuum drying Basket useful dimensions: LxWxH 600x400x300h mm max. loading weight: 150kg loading table in front of the unit included control: Siemens S7-1200 with 20 programs

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Dodpsd Spf Rjfx Addowf Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: ready for operation (used), Year of construction: 2021, Travel X/Y/Z: 630mm/530mm/465mm, tool holder: SK40, speed: 12000rpm, tool positions: 32, table dimensions X/Y/Z: 920mm/540mm, machine dimensions X/Y/Z: 2600mm/2350mm/2750mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible. Dedpfx Adowm Nphodewf

Condition: reconditioned (used), Modernized machines with the new LTG StoreControl L control system External dimensions: Height 6,000 mm Width 1,630 mm Depth 2,980 mm 30 beams, each with a payload of 500 kg with the clear usable dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Start of the access opening at 870 mm above the top floor, then 845 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surface cleaned, signs of wear possible Performance values Dwedpfxsn D A Rre Addjf Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 volts More Extras: Hand-operated lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently primarily in Germany, Austria, and other neighboring countries.

Condition: new, The Cedes Safe C200 Can height detection, object protection, safety evaluation device assembly has been discontinued by the manufacturer and can therefore no longer be procured. Therefore we already have developed a replacement control for these devices, which ensures continued overdoing for years. In this context, we provide spare parts, e.g. the Cedes Safe C200 Can is available for immediate repair by our technicians, on loan and free of charge, until the device control is replaced. Dsdpfx Adsiwc Rlsdewf This means that the vertical-lift can be used continuously and the control exchange can be planned. Of course we can repair and modernize any other dynamic storage systems as well. Do not hesitate to ask for an offer !!!

Condition: excellent (used), Year of construction: 2021, Trumpf TruLaser Tube 3000 (2021) 2000W Manufacturer: Trumpf Model: TruLaser Tube 3000 Dwodpfxjxrpb Ej Addsf Condition: used, as new

Condition: used, Year of construction: 2016, travel -x axis 800 mm travel -y axis 450 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.000 x 450 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 4500 equipped with 30-way tool changer, ITC cooling system and chip conveyor. Dsdpfx Aswq S Aloddewf The machine only has 5.365h spindle hours. The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500