Used rubber processing machinery for sale (28)

Condition: used, Year of construction: 1982, operating hours: 12,34,567 h, machine/vehicle number: 228072, clamping force: 1,600 kN, operating pressure: 200 bar, heating capacity: 25 kW (33.99 HP), Used rubber injection molding machine, Werner & Pfleiderer. Original control system and machine are in good working order, but the hydraulics have a significant oil leak and need to be repaired. Heating plate size: 450 x 500 mm, electrically heated. Temperature control has been replaced. Core puller: hydraulic at the top, mechanical at the bottom. Opening stroke: 560 mm. Cylinder temperature control units are not included. Nedpjz N Sx Tefx Airewn Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged independently.

Condition: used, Year of construction: 1992, operating hours: 12,34,567 h, machine/vehicle number: 20.2628, clamping force: 2,500 kN, operating pressure: 200 bar, heating capacity: 7 kW (9.52 HP), Used DESMA 968-250 rubber injection molding machine. The control system was replaced in 2016. Heating plate size: L 650 x W 380 mm. 6 additional heating circuits are available. The dispensing volume with intrusion has been increased to 2350 g. Minor oil leakage in the hydraulics. Overall condition is good, and the machine is operational. Cylinder temperature control units are not included. Njdpfx Aez Rmiisirown Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer.

Condition: used, Year of construction: 1991, operating hours: 12,34,567 h, machine/vehicle number: 20.2588, clamping force: 2,500 kN, operating pressure: 200 bar, heating capacity: 7 kW (9.52 HP), Used DESMA 968-250 rubber injection molding machine. The control system was replaced in 2016. Heating plate size: L 650 x W 380 mm. 6 additional heating circuits are available. The dispensing volume with intrusion has been increased to 2350 g. Minor oil leakage in the hydraulics. Overall condition is good, and the machine is operational. Cylinder temperature control units are not included. Nedpfxsz Rmpvj Airjwn Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1000466, For sale is a professional direct injection molding machine from leading manufacturer DESMA, model S712. This machine is ideally suited for the efficient series production of footwear with directly molded soles (direct injection molding). Areas of application & uses: Ideal for TPU - 200T clamping force Footwear industry: Production of safety shoes, work shoes, hiking boots, as well as leisure and shaft boots. Nwedoz H Ibwepfx Airsn Materials: Processing of polyurethane (PU), TPU, or PU combinations for sole production. Process: Direct injection molding of the sole material onto the upper. Equipment & features: Type / design: DESMA S712 rotary table machine / carousel machine with multiple stations. Molding head: Precision mixing head for accurate material metering and clean mixing. Control: Ergonomic control panel for central control of temperature, injection volume, and cycle times. Hydraulics & pneumatics: Robust clamping units for even pressure and burr-free sole edges. Safety: Integrated safety guards and light curtains according to industrial standards. Technical data (standard configuration): Manufacturer: DESMA Schuhmaschinen GmbH Model: S712 2003 expansion to 8 stations Application: Direct injection molding / sole injection molding Processable media: PU systems (polyol / isocyanate) Condition: Used, from current/former production

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system Nwjdpfx Aisy Exrpjrjn 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 11,500 mm, total length: 16,500 mm, total height: 4,350 mm, -Cooling section from VMI -Swiveling discharge conveyor -Strip/felt dimensions of approx. 70mm-800mm width -24 cooling fans -Stainless steel dip tank and reservoir -Pallet magazine Nwodpfx Ajz Eppgjirjn -Pallet cleaning with extraction system -Drive unit replaced -Chain replaced -Transverse conveyor with 2 pallet positions -Hydraulic lifting table -Weighing scale -Various stacking options on pallets, DB Gibo, cardboard packaging, etc. -Other equipment from the production line is also available for sale. Attractive package price possible.

Condition: used, Year of construction: 1990, functionality: fully functional, Rolling mill, manufacturer Reinhardt - 2000 mm wide - Hydraulic gap adjustment - Stock blender with traversing function - Pneumatic cut-off device with control cabinet - Display for process monitoring/control of gap/speed... Nwjdpfxsz Ery Us Airon - Hägglunds hydraulic drive offering a complete mixing line at an attractive package price.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: DC, total width: 3,600 mm, total length: 2,500 mm, total height: 6,700 mm, - Harburg Freudenberger internal mixer production is underway - certified according to IATF 16949 until early 2026 - Type GK 255 N - Hydraulic ram, saddle, filling shaft flap Nwjdpfxez D E Dqo Airjn - Pro c tec control system - with Siemens drive - Gearbox - Hydraulic unit - Lubrication unit - HF, CB, WM dosing - Engine overhauled in 2022 - Gearbox refurbished - Annual manufacturer inspection/maintenance/documentation - Upstream and downstream equipment available - Attractive package price possible

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Nwsdpfxozgvxye Airsn Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, nominal power: 150 kW (203.94 HP), Deguma drop mill, older model - 1800 mm wide - Hard metal and gearbox mounted on the machine bed - Water-cooled via lances - Pneumatic clamping system - Fencing with emergency stop control - Drive motor 150 kW - Central lubrication system Nodpfx Ajz Erxqeirown - Starter - Control cabinet - Selling a complete mixing line; attractive package price possible.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 41/640, clamping force: 250 kN, Four-point injection molding machine, Rutil MP4 model, with a platen size of 260 x 240 mm and a clamping force of 25 tons. The machine is in working condition. Nwjdpfsyb Rn Tsx Airjn

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 571 EIT 9106/1149, clamping force: 2,500 kN, Injection molding machine REP S, floor dimensions 500 x 630 in working condition with clamping force 250t and injection capacity 968 cm3 Nwedpfxsyb Icbe Airen

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating pressure: 280 bar, Rubber injection molding machine in very good condition, manufactured in 2020. Detailed Technical Data: Clamping Unit: Clamping force: 4000 kN Min. mold height: 100 mm Mold opening stroke: 750 mm Max. daylight between heating plates: 850 mm Design: vertical Closing direction: from the top Heating Platens: Platen size: 800 x 806 mm Heating power: 2 x 14 kW Injection Unit: Shot volume: 4000 cm³ Max. injection pressure: 2000 bar Screw diameter: 60 mm Screw length: 10 D Max. screw speed: 0-180 rpm Injection direction: from the bottom Hydraulic System: Variable pump and proportional valves for pressure and flow Hydraulic manifold for stroke control with shift valves Reservoir capacity: 250 l Operating pressure: 280 bar Electrical Equipment: The design of the electrical equipment complies with DIN/VDE standards 0100, 0113 Electrical cabinet protection IP 54 according to DIN 40050 Connected voltage: 3 x 400 V + N + PE Frequency: 50 Hz Connected load: 77 kW Motor capacity: 45 kW Rated heating power: 2 x 14 kW Nwodjz E N Ayjpfx Airjn Control voltage: 24 V DC Permissible temperatures: 0 - 40 °C

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t Nsdpfx Aey E I Awoirewn The main control panel: approx. 1.5t

Condition: ready for operation (used), functionality: fully functional, Rubber extrusion line for production of rubber extrusion profiles Nedpfxoyn Ec Ee Airjwn

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 466EIF712N14 / V47Y10D94502002, clamping force: 1,800 kN, Two REP injection molding machines with platen dimensions 510 x 430 mm, clamping force of 180 t, and injection capacity of 670 cm³. The first machine requires piston repair and seal replacement. The second machine is missing the hydraulic pump, pressure control valve, and control program card. Nwjdpfx Aieyb Rw Ueron

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Nedpox Exndofx Airswn Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: like new (used), Year of construction: 2020, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, number of injections: 1, Excellent rubber injection moulding machine in mint condition, year 2020. Very few operating hours, in mint condition. Closing force 600 tons Injection volume 2500 cc Heater blades 1200 x 1300 mm FIFO injection system 2500 bar Core lifting moving plate Core lifter fixed plate Nedpfjtu H Stsx Airewn Data backup on CF card Energy reduction by servo pump control

Condition: used, Year of construction: 1993, Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 5000kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible. Nedpezyq Snefx Airjwn

Condition: used, Year of construction: 1990, Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible. Nwedpfjzyq Shex Airsn

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Nwjdpfxsxrc Eqj Airsn Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Nwodpfx Asxrdgveirsn Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Nwjdpfx Ajy Eyy Ueiren Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers

Condition: used, Year of construction: 1988, functionality: unexamined, available Berstorff Mill 400 x 900mm more details in attached description! Nsdpfx Aor A Dfyoirown

Condition: used, Year of construction: 1990, PN-370 Pomini-Farrel Rubber Mixer Tangible Available complete with gearbox, 2 x DC motors, oil scale, fur scale, chemical scale, and batch feeder Nedewmnfhjpfx Airjwn Description attached!