Extraction system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Cpsdpfx Asygilhjfpou Voltage: 400 V Fuse: 25 A Power: 11.0 kW EQUIPMENT Automatic feed system

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Cedpekvnumsfx Afpepu Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 70,263 h Cpjdpjyf Dr Hofx Afpju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Cpsdpjyf Dqiofx Afpeu Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Battery capacity: 70 Ah EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix Cedpfxjxd U Sae Afpopu For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 21 kg, Auction of a Plymovent KUA-2/H! MACHINE DETAILS Cpodeyf Dnhopfx Afpsu Net weight: 21 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, overall weight: 171 kg, total length: 1,200 mm, total width: 1,200 mm, total height: 1,300 mm, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,300 mm Weight: 171 kg Cjdjyf Ddpepfx Afpjpu Connected load: 400 V Refrigerant: 95 g / R134a Compressed air supply: 5-8 bar EQUIPMENT Printer: Star DP8340S

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m Csdpfx Asb U Hwpefpopu

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total width: 1,120 mm, total length: 1,240 mm, overall weight: 450 kg, load capacity: 150 kg, inner diameter: 220 mm, TECHNICAL DETAILS Csdpfx Afjyf Dbuepepu Load capacity per spool: 150 kg Inner diameter: 220 mm Inner belt width: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,240 x 1,120 x 2,200 mm Weight: 450 kg EQUIPMENT Wiring diagram

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 1,00,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm Codpoyf A U Hsfx Afpepu EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m Cpjdpfsb U Hwtox Afpju

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT on castors Cpjdpfx Afjyf A S Eepou with foot switch Note: The machine is sold without a riveting head.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! TECHNICAL DETAILS Cpedpfx Afeyf A Nqepeu Payload: 100 kg Diameter: 150 mm to 850 mm Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° MACHINE DETAILS Battery: 12 V, 70 Ah EQUIPMENT Gripper function Note: The truck is sold without a charger.

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface Csdjw D E Sajpfx Afpspu – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,360 mm, overall weight: 430 kg, load capacity: 30 kg, pump capacity: 80 l/min, TECHNICAL DETAILS Load capacity: 30 kg Pump capacity: 80 l/min Tank volume: 2 x 150 l MACHINE DETAILS Voltage: 400 V Power consumption: 1.5 kW Cjdpfx Afsyf A I Hspjpu Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,360 x 1,560 mm Weight: 430 kg