Crusher Humboldt-Wedag

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | | Maximum Feed Size | approx. 600–800 mm | | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | | Weight Range | 55 tons | Kodpjxcg Spefx Aansfa

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Kfodpfxepn I H Te Aanea Type: 36/H/MC Incl.: basic chasis and oil unit

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Kodpfx Asiuky Ieanofa

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Kjdsvwlqqjpfx Aanefa Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: Kfsdpfeh Nyfyox Aansa length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495.

Condition: ready for operation (used), Year of construction: 1989, Used single-toggle jaw crusher 1300 x 900 mm, including spare shaft and FAG 23152 K MB C3 bearings. Year of manufacture and make are unknown. The crusher operated reliably until 2023 and was then replaced with a mobile plant. Kodewmgw Nopfx Aanjfa

Condition: used, Year of construction: 2003, Technical details: Kfodpfxju Nw Ezs Aanja pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm *

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers Kfjdpjlc Du Nsfx Aanja article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Kedpsra Rbgefx Aanofa Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Kfjdoufih Dopfx Aanja Complete electrical installation with control cabinet in container