Planolith surface plate 800x600

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,000 h, functionality: fully functional, turning diameter: 309 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 89 mm, travel distance Z-axis: 406 mm, controller model: Fanuc Typ 18i-T, TECHNICAL DETAILS Maximum turning diameter: 309 mm Spindle speed range: 25 – 6,000 rpm Travel in X-axis: 89 mm Travel in Z-axis: 406 mm Collet diameter: 42 mm MACHINE DETAILS Control system model: CNC Fanuc Type 18i-T Spindle motor drive power: 11 kW Operating hours: 28,000 h Machine weight: approx. 5,000 kg EQUIPMENT C-axis Y-axis 12-station turret VDI 30 Powered tools at each station Power chuck, diameter 140 mm Hydraulic steady rest Workpiece collection system Chip conveyor Coolant system Bedpfjzu Rz Eex Abtoll

Condition: used, Year of construction: 2022, HAAS ST25Y with counter-spindle, year 2022 maximum machining diameter: 298 mm, cutting length: 572 mm, spindle through-hole: 76 mm, 12-position BMT65 turret, Y-axis travel: +/- 50.8 mm, HAAS control system, 3-jaw chuck, 254 mm, Bjdpfxjzk H Hvo Abtell -counter-spindle -chip conveyor, -swarf tray with pump, -measuring probe, -parts catcher low operating hours, excellent condition.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Bledpfx Abjzu Rzretel Travel range Z-axis: 1,040 mm Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Machine weight approx.: 7,200 kg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Machine without tailstock Foot switch Chuck Turning chuck

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, The machine has been very well maintained, regularly cleaned, and serviced. It is in near-new condition! TECHNICAL DETAILS Laser power: 2,000 W Bedpjzt R R Refx Abtoll Laser source manufacturer: IPG Laser type: Fiber laser Max. sheet thickness: 15 mm Max. steel sheet thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation / manual Safety light curtain Shuttle table Extraction system

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Bsdpfx Abowx Rcyotjll

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,488 h, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, The table and the dust extraction system are included in the price! TECHNICAL DETAILS Travel range X-axis: 3,500 mm Travel range Y-axis: 1,100 mm Travel range Z-axis: 1,500 mm Table dimensions: 3,800 x 1,000 mm Spindle taper: ISO 50 Spindle speed: 5,000 rpm Bodpfx Abezr H H Sstell Tool positions: 40 Working feed rate: max. 15,000 mm/min Rapid traverse: 40,000 mm/min Maximum axis force (X, Y, Z): 1,500 N MACHINE DETAILS Control system: SELCA S 4045 PDH Operating hours according to image (as of: July 31, 2026) Total: approx. 29,147 h Partial: approx. 3,488 h A manufacturer's offer for dismantling and loading is available for €27,000.

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Bsdpszx E N Sofx Abtjll Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Bledeh Hd A Sepfx Abtol Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Blodpfx Abszx E Axotsl Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Bljdpfx Abozw Ak Rotsl Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: new, 6 St. range L-W-H 880 x 580 x 800 mm weight 126 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 2 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. Bjdpfeupxrbox Abtjll 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Bodpszvb I Eefx Abtell Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Bjdpfx Aezv Rlgebtjll Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness Blodpjwzlcasfx Abtol - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour X 280mm (XL) 360mm Measuring range Roughness Z 350mm (XL) 550mm Suitable range Ra Ra from 0.08µm* Suitable range Rz Rz from 0.8µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Blsdpfx Abszv N Hpetjl Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE