Grapple

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30715522, operating pressure: 10 bar, usable tank capacity: 270 l, Submitting a bid constitutes an obligation to collect the item on time by 27/02/2026! TECHNICAL DETAILS Operating pressure: 10 bar Effective delivery rate: 570 l/min MACHINE DETAILS Connected load: 4 kW Voltage: 400 V Fpsdpfx Aeyfn Ewofpec Pressure vessel capacity: 270 l EQUIPMENT Duplex filter set WBF 63 MFO/CA (consisting of microfilter and activated carbon filter including automatic float drain) Oil-water separation system KON-C2 incl. inlet and outlet fittings 2 fully automatic vessel drain valves KN 1.230

Condition: ready for operation (used), functionality: fully functional, Submission of a bid obligates timely collection by 27.02.2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT Robust construction Easy and hassle-free spindle head change Fpedpfsyfnwtex Afpoc Pneumatic two-hand control 6-spindle drilling head Useful special accessories for extended machining options

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,600 mm, cutting height (max.): 2,070 mm, cutting depth: 60 mm, saw blade bore: 30 mm, Submission of a bid obligates you to collect the item by the deadline of 27.02.2026! The machine was overhauled in the workshop, functionally tested, and cleaned in 2025! TECHNICAL DETAILS Cutting length: 4,600 mm Vertical cutting height: 2,070 mm Horizontal cutting height: 1,958 mm Fodpfxeyfnure Afpepc Cutting depth: 60 mm Saw motor power: 3.9 kW Saw blade diameter: ∅ 250 mm Saw blade bore: 30 mm Saw blade speed: 5,250 rpm Extraction port: ∅ 100 mm Strip gauge: 600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,826 x 2,838 x 1,428 mm Weight: approx. 910 kg Connection value/power supply: 4.8 kW / 3 ~ 400 V | 50 Hz EQUIPMENT Electromagnetic motor brake Mechanically braked support rollers

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Fsdpfxsyfnqtj Afpepc Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

Condition: ready for operation (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, machine/vehicle number: 325202, turning length: 305 mm, turning diameter: 210 mm, rotational speed (max.): 5,000 rpm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 1190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over cross slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Fpjdpoyfgttofx Afpec Spindle speed: 5,000 rpm Turret: 12 stations Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 1190 Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 38,000 h EQUIPMENT Coolant system Tailstock Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Fpjdoyc Ub Topfx Afpoc Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Condition: not inspected (used), Year of construction: 2009, operating hours: 29,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, total length: 7,755 mm, workpiece height (max.): 40 mm, working height: 950 mm, controller model: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Fpsdpfx Afeyc S Haspsc Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2008, operating hours: 33,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, working height: 950 mm, controller model: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Fsdpfx Afeyc Sr Aopjpc Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2009, operating hours: 6,000 h, functionality: unexamined, feed rate X-axis: 80 m/min, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,680 mm, travel distance Z-axis: 275 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range X axis: 3,550 mm Travel range Y axis: 1,680 mm Travel range Z axis: 275 mm Main spindle max. speed: 24,000 rpm Working area X axis: 3,060 mm Working area Y axis: 1,210 mm Working area Z axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Side pick-up station for 2 tools Traveling pick-up station for aggregate/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm), arranged on X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum suction cup positioning 2 working areas for pendulum operation Handheld terminal Fedsyc Smgepfx Afpjpc Automatic central lubrication Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting length (max.): 4,200 mm, saw blade diameter: 320 mm, cutting width (max.): 3,500 mm, overall weight: 4,800 kg, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Fpjdpfx Aeyc Sggofpoc Weight: approx. 4,800 kg EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Note: Container loading and seaworthy packaging by the seller is not possible.