Nagel Numnak S

Year of construction

2009

Condition

Used

Location

Čestlice

Basic data

Machine type:: Nagel Numnak S

Year of construction:: 2009

Condition:: used

Price & Location

Location:: Čestlice, Czech Republic

Call

Details about the offer

Listing ID:: A22565012

Reference number:: 4053

Update:: 17.08.2026

Description

Year: 2009

Condition: very good

Counter: N/A

Technical specification:

- Width (mm) 780
- Height (mm) 1050
- Weight (kg) 162
- Power requirements 230 V / 50 Hz
- Maximum output (cycles per hour)

1 – 4 numbering boxes 9

4 – 6 numbering boxes 5

7 – 8 numbering boxes 4

- Maximum number of numbering boxes 8
- Max. sheet size (mm) 460 x 460
- Min. sheet size (mm) 210 x 125
- Carbonless sets

Maximum 7 sheets
Lrodpfx Akjzuyfysmou

Minimum (gsm) 45

- Max. spacing of numbering boxes on the same collar

Parallel 365 mm

Convex 354 mm

- Min. spacing of numbering boxes on the same collar

Parallel (mm) 50

Convex (mm) 73.50

- Continuous reloading ✓
- Simultaneous perforating, creasing or slitting ✓
- Oscillating inking roller ✓
- Fine adjustment during operation ✓
- Infinitely variable speed ✓

Configuration:

- 4 counters (7 digits)

The Nummak S can process up to 9,000 sheets or sets per hour. The speed is infinitely variable. The rotary principle permits uninterrupted printing, which saves time and delivers better results.

The sheet size can be chosen freely up to 460 mm x 460 mm. The number can be placed anywhere on the sheet or on the perforation.

The powerful suction feeder can process a wide range of materials. Sets glued at the top edge can also be fed with the open edge first for simultaneous perforation parallel to the glued edge. Even carbonless sets of up to 7 sheets are no problem for the Nummak S.

The oscillating inking roller is a standard feature and ensures a uniform ink application and permits use of different colours. Even if several numbering boxes are used, inking remains absolutely accurate.

Since the sheets are fed from the bottom of the stack, additional sheets can be loaded “on the run”. All parts are easily and quickly accessible, and set-up and cleaning is done in mere moments. A fine adjustment of the machine can be made during operation.

Numbering, perforating, creasing and slitting can be accomplished in one pass through the machine and without the sheets stopping.

Seller

Registered since: 2018

44 listings online

Call

Send inquiry

Telephone & Fax

+420 311 ... show

+420 222 ... show

Fax:

These listings may also fit your interest.

Auction

High-temperature vacuum furnace PVA TePla COV 733 RS

Województwo podlaskie

5,942 km

High-temperature vacuum furnace
PVA TePlaCOV 733 RS

€1,20,000

To the auction

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Ljdpfxoz I Tt Io Akmoru Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

See details

Listing

Vacuum tempering furnace ELTERMA / IPSEN VDFC-413

Guipúzcoa

7,748 km

Vacuum tempering furnace
ELTERMA / IPSENVDFC-413

€17,000

EXW Fixed price plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 1988, machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes Ledpfx Akom E Tvhemeru

See details

Auction

Laser cutting machine TRUMPF TruLaser 2030 Fiber

Saarland

7,006 km

Laser cutting machine
TRUMPFTruLaser 2030 Fiber

€33,000

To the auction

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain Lrsdsz I S Uwjpfx Akmou

See details

Auction

S+UVV 03/27 Electric 6,200 h Linde D 12HPSP

Bayern

6,625 km

S+UVV 03/27 Electric 6,200 h
LindeD 12HPSP

€1,800

To the auction

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lrjdpfx Ao Ad Rdiskmeu Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

See details

Listing

1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P

Emskirchen

6,726 km

1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press
HeidelbergGTO46+ N+P

Call

Condition: used, 1 Color Sheet-Fed Offset Press with VARN Compac Dampening System 1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1978 - Serial-No. 664275 Size max. 320 x 460mm Impressions 70 Mio. Paperweight: 0.04 - 0.4 mms Lrsdpfxjz A Ufbo Akmsu Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version Mit Zubehör und Handbüchern / With accessories and manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

See details

Auction

2x battery + charger 2022 Linde MT12 MT15 Linde 48V

Bayern

6,625 km

2x battery + charger 2022 Linde MT12 MT15
Linde48V

€470

To the auction

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Year of manufacture: 2022 Type: 48 V / 20 Ah ELECTRICAL DATA Lrjde Ad N S Ejpfx Akmeu Battery voltage: 48 V Battery capacity: 20 Ah MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 800 mm Weight: 50 kg EQUIPMENT 2 lithium-ion batteries Charger Battery connector Wall plug Lot number 3632 Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

See details

Auction

2019 service + UVV inspection valid until 07/2027, Linde P50 Linde P50

Bayern

6,625 km

2019 service + UVV inspection valid until 07/2027, Linde P50
LindeP50

€1,460

To the auction

Condition: ready for operation (used), functionality: fully functional, operating hours: 1,952 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Type: P50 Year of manufacture: 2019 Drive: Electric Operating hours: 1,952 h PERFORMANCE Towing capacity: up to 5,000 kg BATTERY Battery date: 06/03/2019 (?) Battery voltage: 24 V Battery capacity: 500 Ah Rest voltage: 24.7 V INSPECTIONS AND SERVICE Ljdpfxs Ad N Slo Akmoru Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 800 mm Height: 1,400 mm Own weight: 1,000 kg Lot number: 453 Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

See details

Listing

Lauda-Königshofen

6,805 km

Letterpress
HohnerBoston Tiegel M

Call

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Ljdpexc Eucefx Akmeru

See details

Auction

2020 FEM3 40-180cm Linde H50D Rotator Linde Drehklammer

Bayern

6,625 km

2020 FEM3 40-180cm Linde H50D Rotator
LindeDrehklammer

€4,770

To the auction

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Internal opening: approx. 400–1,800 mm Fork positioner: present (?) MACHINE DETAILS MANUFACTURER AND MODEL Manufacturer: Linde Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lrjdpfe Ad N Igjx Akmeu Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

See details

Auction

2019, S+UVV inspection valid until 09/2027, Still EXU-SF20 Still EXU-SF20

Bayern

6,625 km

2019, S+UVV inspection valid until 09/2027, Still EXU-SF20
StillEXU-SF20

€1,350

To the auction

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,794 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: EXU-SF20 Year of manufacture: 2019 Operating hours: 7,794 h Lifting Capacity and Lift Lifting capacity: 2,000 kg Lift height: 150 mm Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 250 Ah Battery year of manufacture: Measured idle voltage: 25.4 V Lrsdpfxo Ad N H Ae Akmju MACHINE DETAILS Dimensions and Weight Length: 2,000 mm Width: 800 mm Height: 1,400 mm Own weight: 800 kg EQUIPMENT Battery charger Functional and condition video available Lot number: 340 Collection Conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

See details

Listing

Folding machine Heidelberg Stahlfolder TI52-6-4 Proline

Winkelhaid

6,688 km

Folding machine
HeidelbergStahlfolder TI52-6-4 Proline

Call

Auction

44/2023 service + UVV (accident prevention inspection) 03/2027 Linde D12H Linde D12 HP SP

Bayern

6,625 km

44/2023 service + UVV (accident prevention inspection) 03/2027 Linde D12H
LindeD12 HP SP

€1,400

To the auction

Condition: ready for operation (used), functionality: fully functional, operating hours: 5,515 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,200 kg Lifting Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: Simultaneous lifting of 2 pallets Ground clearance: Increased by initial lift, suitable for uneven surfaces Battery Battery voltage: 24 V Battery capacity: 375 Ah Ljdpfx Akj Ad N E Eomeru Measured battery voltage: 24.6 V Battery year of manufacture: 2023 MACHINE DETAILS Machine data Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 5,515 h Own weight: 1,500 kg Dimensions Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm EQUIPMENT Initial lift Battery year of manufacture 2023 Formerly a Linde full-service unit Lot number: 370 Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

See details

Auction

Bayern

6,625 km

44/2023 service + UVV (accident prevention inspection) 03/2027 Linde D12H
LindeD12 HP SP

€2,400

To the auction

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 6,655 h Lifting Capacity and Lift Lifting capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: available Pallet capacity: 2 pallets simultaneously Battery Battery year of manufacture: Week 44/2023 Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 25.5 V MACHINE DETAILS Dimensions and Weight Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Own weight: 1,500 kg EQUIPMENT Ledpfx Ako Ad N Elomsru Initial lift for increased ground clearance on uneven surfaces Previously a Linde full-service machine Lot number: 390 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

See details

Listing

Wassenberg

7,061 km

Adhesive Binder
FKSKB 2000

Call

Auction

2019 serviced + safety inspection (UVV) valid until 09/2027, Still RX20-18 Still RX20-18

Bayern

6,625 km

2019 serviced + safety inspection (UVV) valid until 09/2027, Still RX20-18
StillRX20-18

€8,900

To the auction

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available Ljdpfx Aks Ad N D Usmsru FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

See details

Advertise here