Tool setting device (24310)

SK 50

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: S.AdK 6 -Recording: SK50 Hedpfxsxdwx Ao Ab Ijnt -Adjustment accuracy: 0.01 mm -Dimensions: 175/150/H305 mm -Weight: 24 kg

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min Hsdpfsyfwunex Ab Iont distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: used, mileage: 50,958 km, power: 177 kW (240.65 HP), first registration: 10/1993, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total length: 7,200 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Exceptionally clean vehicle with original 50,958 km +++ Water tank 1200l +++ Rear pump 16/8 Superstructure: Schlingmann All-wheel drive 4x4 with 2x differential locks, center and rear, ABS Manual lighting mast with 2x 1000W Wheelbase 3640 mm Maximum speed Vmax according to documents 92 km/h, according to GPS: 95 km/h Hnjdpfx Abez Amn Dj Ist Recent inspection completed, including lubrication and new fuel filter as well as new air dryer cartridge +++ Errors, changes, and prior sale reserved.

Condition: ready for operation (used), Motorized tool holder SK40 / SK50 from Zoller machine 6084 / H4000, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hnjdpsztmkgofx Ab Iot

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hnjdpfxsh Nypfs Ab Iet

Condition: excellent (used), Tool cabinet for storing tool holders Cabinet 1: Dimensions (LxWxH): 100x60x200 cm Space for 24 SK 50 tool holders (DIN 69871 or DIN 2080) The tool holders shown are included. Hedpfjvptwpex Ab Ijnt Price: €590

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Gear ratio: i = 35.00 Output speed: 40 rpm Hedpjznk U Ejfx Ab Ient Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-hand machine) Technical specifications: Travel ranges: 450x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling level 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Power connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Newly painted light grey + telegraph grey New control cabinet New control system APC910/2 (win10) User interface MF30 V 2.8 New B&R drives with Endat interface Touchscreen Generator exopuls+ 60A Rev.4 Rotary table, 5-axis Touch protection, operated via buttons Linear scales in all axes X, Y, Z (Fagor) Cartridge filters 2 pcs Cooling unit Termogamma Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO2 extinguishing system C-axis Hirschmann 50/min., holding brake, completely overhauled Manual control panel with confirmation button Lowering tank with automatic follow-up Chucks Erowa IST, Hirschmann, 3R Warranty 12 months Transport Commissioning on-site Hnjdpfjhtrdyex Ab Iet Training

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA (Origin Italy) boring mill. Spindle taper: SK 50 Overhang: 660 mm Flange dimensions: 465 x 440 mm Internal bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions (L x W x H): 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Continuously adjustable angle, manual • 4 fixed indexing points at 90° each with locating pins • Tool clamping with drawbar • Suitable for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, swivels left/right, manual tool clamping, ... Hjdpjyc Nhhjfx Ab Ijnt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), SK 50 holders 60 pieces (28529) Hodpet Uztljfx Ab Iont Weight 275 kg

Condition: used, functionality: fully functional, Forklift Kalmar LMV 9-600 Hjdpfx Ajvq Im Ueb Isnt Load capacity 9 T Diesel

Condition: excellent (used), 4 Schunk Tribos tool holders Hsdpfszkp Tfex Ab Iont SK50 In very good condition Size 20mm

Year of construction: 1996, condition: used, For sale is a heavy-duty CNC milling head, SK50. This is a universal milling head in a heavy-duty design for SK50 toolholders. It is ready for immediate use. It can be manually swiveled and does not have internal cooling. It is suitable for various machines, such as CME, MTE, and others. It offers excellent clamping force, runout, and smooth operation. It can be test-run on our machines. It was removed from an MTE BF2200, which was in production until the very end. If you are interested, please contact us. The price does not include transportation. Hodszmq Icspfx Ab Ient

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface Hnodpfx Asvppw Ssb Iot -High operating comfort

Condition: used, Tool holder, milling holder, milling tool, long milling arbor Hodpfxoc Ih R Ts Ab Isnt -2x mounts: SK50 -1x diameter: Ø 27 x 300 mm -1x diameter: Ø 32 x 300 mm -Sale: only complete -Weight: 12.8kg