CNC lathe

Magdeburg M160 Gs4

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16220C164110, MACHINE DETAILS Operating voltage: 400 V Power: 98 kVA Rated current: 198 A Three-phase current: 400 V Dkedpfjxfaxbox Afuei Frequency: 50 Hz

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm Dodpfxevprv Rs Afueki table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): Dkodpfx Asx D E Hbsfuei • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Dodpfx Afsh Rdxnjujki Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface Dodjyffgropfx Afuoki • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Dodpevy Iukofx Afujki Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: new, Extraction capacity of filter unit at spigot*: 3550 m³/h (free-eye) Total power consumption*: 0.88 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 73 db(A) Dimensions L/W/H in mm: L 1283 / W 1020 /H 595 Colour: RAL 7035 Weight: 170 kg Djdpfxjh Rdypo Afuoki Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms (oil mist separator). Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), Year of construction: 2017, MAXXMill 350 [ Technical Data ] Travel and Tolerances Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Distance spindle nose – table surface (min. - max.): 70 / 370 mm Swivel range B-axis: +/-100° Rotary range C-axis (rotary table): 0 – 360° Feed Rapid traverse X-Y-Z axis: 30 m/min Max. rotational speed B-axis: 20 rpm Max. rotational speed C-axis: 25 rpm Max. motor feed force X-axis: 3000 N Max. motor feed force Y-axis: 3000 N Max. motor feed force Z-axis: 3000 N Max. acceleration X-Y-Z-axis: 4 / 3 / 3 m/s² Swiveling Rotary Table Table diameter: 400 mm Table height from floor: 860 mm Number of T-slots: 5 Dkodpfx Asx H T Eysfuji Slot spacing: 75 mm Slot width: 14 mm Max. permissible workpiece weight (evenly distributed): 50 kg Main Spindle (mechanical spindle) Spindle speed: 50 – 12,000 rpm Max. torque: 33 Nm (S6) Max. power: 7 kW (S6) Tool taper: ISO 30 DIN 69871 Pull stud: DIN 69872A Direct drive with coupling Tool Magazine Number of tool stations: 20 (30, 50) ISO 30; 30 (50) HSK-A40 Tool change concept: changing arm Tool management: random Tool change time (tool-to-tool): 2 sec Max. tool diameter: 63 mm Max. tool diameter (without adjacent tool): 100 mm Max. tool length: 200 mm Max. tool weight: 5 kg Max. drum load weight: 60 / 70 / 100 kg Coolant System Coolant tank capacity: 120 l Standard coolant pressure: 2 bar Max. delivery rate at 2 bar: 40 l/min Pneumatics Min. supply pressure: 6 bar Min. supply volume: 200 Nl/min Lubrication System Spindle: grease Roller guide: oil / central lubrication Ballscrew: oil / central lubrication Dimensions Overall height: 2300 mm Installation area (W x D): 1630 x 2300 mm Weight: 3800 kg

Condition: good (used), Three-jaw power chuck KS 400 Chuck size 11 according to DIN 55027 Outer diameter 600 mm Brand Forkardt Clamping diameter 400 mm with base jaws with pointed toothing 3/32" x 90° We see ourselves as a competent partner in the field of deep hole drilling. You are also welcome to send us inquiries regarding contract deep hole drilling work. Dkjdpsvvtmqsfx Afuji

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Dodpfx Asx D Dzdjfujki Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling