Used Kgt 550 for sale (3,006)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: X-tra 550 HI, total width: 495 mm, total length: 620 mm, total height: 570 mm, maximum load weight: 10 kg, heating capacity: 3,000 kW (4,078.86 HP), tank capacity: 45 l, type of input current: three-phase, inner dimension height: 350 mm, inner dimension length: 500 mm, inner dimension width: 300 mm, overall weight: 35 kg, input voltage: 4,00,208 V, input frequency: 5,060 Hz, year of last overhaul: 2026, • Ultrasonic cleaning unit Elma X-tra 550 HI See data sheet in the appendix 1 unit • Rinsing basin X-tra 550 HI SW See data sheet in the appendix 1 unit (one of which currently has a defective heating element) • Drying basin X-tra 550 WLT See data sheet in the appendix 1 unit Condition: used – fully functional – the units have been cleaned and their functionality checked by the maintenance department Iisdoz Tlaljpfx Agyjh Year of manufacture: 2005 I am available for further information.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call. Iedpjx Nw Drjfx Agyeih

Condition: used, functionality: limited functionality, The following are offered: OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot positions for the Erowa clamping system: 70 positions (workpiece changer) Robot positions for pallet changing: 8 positions Iisdpjzzavrofx Agyoh The robot is currently not in operation due to a fault. However, this can be repaired so that it functions normally again.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,350 h, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details. • C and Y axis • 102 mm spindle through-hole • Turning length: 1225 mm • Condition: Well maintained Additional equipment • Spray gun • Hand wheel (MPG) • Tool setter Technical Specification Counter Spindle No Iedpfxoz Tqzzj Agyoih Driven Tools Yes

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, Saw blade I, diameter/bore: 550 mm/50 mm Motor: 3 kW; 400 V; 2800 rpm Saw blade II, diameter/bore: 350 mm/40 mm Max. workpiece dimensions: 210 x 100 mm Motor: 2 kW; 400 V; 2800 rpm Vertical cutting height: 150 mm Swivel range of saw blade I: -70°/90°/45° Feed: Pneumatic, controlled by a two-hand system Air connection: 8 bar Operating manual: Available Dimensions (width x depth x height): 1200 x 1000 x 1400 mm Weight: 480 kg Iiodpfx Agjzwqu Rjyeh

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons Iodoyangkspfx Agyeih

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Ijdpfxsz Sl D As Agyeih Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 5101163, spindle motor power: 30,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, type of input current: three-phase, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,800 mm, total length: 9,100 mm, total width: 7,300 mm, distance table center to spindle nose: 950 mm, overall weight: 29,000 kg, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 700 mm, coolant supply: 20 bar, table length: 3,500 mm, table height: 900 mm, table width: 1,200 mm, number of slots in tool magazine: 45, Equipment: chip conveyor, documentation/manual, The machine is in working condition and has no problems. Isdpfx Agezq Rz Djyoih

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm Iodpfxszuywis Agyoih - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Ijdpfxszy Uzye Agyeih Type: Kappa 550 Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: ready for operation (used), functionality: fully functional, WALTHER CN 550 PN TROWAL & RÖSLER Z 300 Turbo Floc Centrifuge -Walther Trowal & Rösler Turbo Floc Centrifuge -Coating in good condition -Rotational speed: 1460 RPM -Capacity: 550 liters -Motor: 3.5 KW -Pneumatic soundproof cover -Control cabinet -SEPARATION UNIT -Dirty water / drain system -Compound and 2 x sets of sliding stones -Documentation Dimensions: L x W x H 2 x 1.8 x 1.8 meters / Weight: 1500 kg RÖSLER Z 300 TURBO FLOC - CENTRIFUGE -Year of manufacture: 1996 -Rotor speed: 3160 RPM -Power: 4 KW -Max. throughput: 800 liters / hour -Documentation -Dimensions: L x W x H 1.7 x 1 x 1.6 meters / Weight: 480 kg Errors and omissions excepted. Ijdpfjz Dg Ikox Agyoih

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,613 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Axes: 3 (X, Z, C); no Y-axis; no counter spindle • Spindle operating hours: approx. 3613 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • C-axis: main spindle CMain spindle and chuck • Spindle nose: A2-8 • Bar capacity: 102 mm (upgraded main spindle) • Spindle power: 33 kW @ 40% DC / 22 kW continuous • Spindle torque: 630 Nm @ 40% DC / 420 Nm continuous • Chuck: SMW BH-D 320 / A2-8, D103 mm (as specified) • Function: differential clamping pressureTurret and driven tools • Turret: 12-position VDI40 with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW @ 40% DC; 20 Nm @ 40% DCTailstock • Travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options (machine) • Setup package Iiedpfx Aez Ipilogyoh • Tropical climate package • 12-bar coolant supply • Manual working-area washdown gun • Variable spindle speed software option • DMG MORI IoTconnector • Digital Manufacturing PackageConstruction • Inclined cast-iron bed • Linear guideways, 45 mm width Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • Tooling: • Set of 12 tool holders • Set of 6 boring tool holders • ALGra driven-tool holder set Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2020, swing 700mm, maximum turning diameter 480mm, bar capacity 80mm, maximum turning length 1240mm, spindle speed 3,250 rpm, , 12 station turret, Iiodpfx Agoz Ebmweyeh spindle power 25.5Kw, siemens 840D Slimline control, tool setter, coolant, Swarf Conveyor.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous Iiedpfx Agjz Ipawoyjh • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package • Tropical climate package • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2016, ZAFFERANI AZV MILL 550 – Year 2016 Drilling/Milling Machine Min. workpiece size: 500x300 mm Max. dimensions: 2400 x 3210 mm Iedpez R Nr Isfx Agysih Installed power: 8 kW Spindle max. speed: 9000 rpm Working height: 800 mm Overall dimensions: 4284x950x222 h mm Weight: 1280 kg Milling tool length: 75 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades - Manual in Czech language (but it is simple machine) Ijdpfxoy Sgqtj Agyeih

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Iiodpfx Agozvm Dlsyoh Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 22 kW (29.91 HP), - Mill for, e.g., processing lumps - Unused machine - Open rotor - Grinding mechanism 650 mm x 550 mm - Control system Iodpfjp E Anvsx Agyjih Spare parts can be supplied. (Sieve, blades, etc.)

Condition: good (used), functionality: fully functional, Vacuum cutter ALPINA SWOOPER SWV 550 S, 550-liter capacity. If you are interested, please let me know. Iijdpezmvwpjfx Agyeh

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! Iisdpfxozvhm Uo Agysh The saw was rarely used; it served as a backup machine

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel distances: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon probing system Chip conveyor Iijdjwv Tm Nopfx Agyeh Spindle cooler IKZ (internal cooling system) 191026ä

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Isdpfx Agezxr Dcsyoih Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,200 mm, Equipment: CE marking, saw blade guard, Format 4 Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment: 202 mm - Positioning control for tilt adjustment: 90°–45° - Crosscut fence 3200 mm, 2 fence stops - Outrigger table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Cutting width 1250 mm - Overhead guard, extractable and height adjustable, can be swung out of the working area (not shown in the pictures but available) - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and angle adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg Iedpfx Agey Hk Swoyoih Price ex location Transport available at extra charge!

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, manufactured in 2018, hot water system, output 550 kW, underfeed firing with a moving grate, including pneumatic cleaning, including infeed auger with backfire protection, including multi-cyclone separator mounted directly on the heat exchanger, including ash removal with an auger, including control system, the system is fully functional! Including electrostatic precipitator, brand Meister, matched to the system, including ash removal for the electrostatic precipitator, including control system for the electrostatic precipitator, including flue gas fan. Isdpfxovgf Ibo Agyjih The system is being sold due to connection to a district heating network. Dismantling can be included as part of the offer.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,941 h, load capacity: 5,000 kg, lifting height: 5,170 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,530 mm, Equipment: cabin, lighting, retractable fork, sideshift, Forklift Jungheinrich DFG 550, year 2010, 3,941 operating hours, diesel, serial no. FN410363, fork positioner, side shift, telescopic forks, load capacity 5,000 kg, StVZO lighting, Blue-Dot rear, triplex mast, lift height 5,170 mm, overall height 2,530 mm, free lift 1,500 mm, fork length 1,200 mm – 2,250 mm Isdpfxoyngp Hs Agysih