Used surface finishing machines for sale (488)

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. Pgsdpfx Ajvlwkxekfok 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day - Line consists . 1. Sand Blasting line Pgedpfx Aohtlw Rskfok 2. Electrostatic painnting line

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Pedpsyzw Hwefx Akfogk Currently, the line is dismantled and ready for transport.

Condition: used, Gietart Roller conveyor shotblasting machine Podpfxoidlq Ss Akfsgk Type: Roller conveyor Max. width of workpiece: 1500 mm Max. height of workpiece: 550 mm Max. workpiece weight: 600-800 kg/m

Condition: reconditioned (used), I am offering a refurbished turbine - STANĚK MZ350. The turbine is equipped with a 7.5 kW motor. Blast wheel, blasting, throwing turbine. Pedpfxey H Akle Akfsgk

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, We offer a table blast machine – STEM with a table diameter of 1400 mm. The blast machine features two rotary tables and two turbines, each turbine rated at 5.5 kW. The designed blasting unit is made for semi-automatic blasting of the external surface of parts placed on the rotary table. The machine is equipped with two rotary tables. Pgsdpfx Ajy Hqc Aokfsk Rotary table diameter: 1400 mm Maximum workpiece height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Total operating hours: 5,275 Commissioning date: 31.03.2009 Machine weight: 5,000 kg Machine length: 3,540 mm Machine height: 5,540 mm Machine width: 6,600 mm Total power consumption: 20 kW Operating parameters Blast wheel, number and type: 2 x WX1M Blast wheel outer diameter: 330 mm Blast wheel speed: 2,900 rpm Abrasive throughput per turbine: 80–90 kg/min Initial abrasive charge: 500 kg Rotary table diameter: 1,400 mm Rotary table speed: 2 rpm Spindle diameter at front bearing: 105 mm Max spindle torque: 2,500 Nm Distance of spindle axis from clamping table surface: 60–560 mm Max. workpiece weight: 1,500 kg

Condition: good (used), Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine Pgjdpfx Ajy Edpyskfek -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Cooling (chamber): Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Pgsdsy Htgwjpfx Akfjk Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Hanger Type Shot Blasting Machine (3 turbines, low hours, complete set) Price: 16,500 € (negotiable) Location: Latvia Condition: Very good, low usage Description: For sale industrial hanger-type shot blasting machine in very good condition. Machine has been used minimally (approx. once per week), making it a low-wear unit with long remaining service life. Suitable for cleaning, descaling and surface preparation of metal parts. Technical specifications: * Type: Hanger / overhead monorail shot blasting machine * Turbines: 3 × 7.5 kW * Total turbine power: 22.5 kW * Frequency converters: Yes (for turbine control) * Dust collector: Pulse-jet type * Workpiece max size: approx. 1600 × 900 mm * Max load: ~500 kg * Wear protection: Replaceable wear plates installed * Included: Spare wear parts set Equipment: * Complete control cabinet * Integrated dust extraction system * Hook/monorail system for parts handling * Buckets and some accessories included Condition notes: * Very low operating hours * Fully functional * Regularly maintained Advantages: Psdey D Eb Ispfx Akfjgk * Compact footprint * Energy-efficient turbines with frequency control * Ideal for small to medium production * Ready for immediate use Reason for sale: Not fully utilized Contact: Message for more details, video, or inspection.

Year of construction: 2026, condition: used, TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Machine details Make: Montforts Model: Montex 12 G/K Year of manufacture: 1986 Major overhaul: 2004, including replacement with economical type burners Refurbished: 2008, then preserved Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Pgsdpfx Ajy A S Thokfsk Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments

Condition: used, Year of construction: 2019, heating capacity 12 kW Temperature range 30 - 90 °C Dimensions (L/W/H) 1.300 x 700 x 600 mm Max. filling weight wire mesh box 800 kg Number of working hours ca. 100 h dimensions 1,5 x 1,5 x 1,5 m weight 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Pgsdpfx Asyz Dhbskfok Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Pjdpexn Azdefx Akfegk

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm Psdpfx Aksyz Scgofjgk

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm Psdsyrr Rqopfx Akfogk - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: good (used), Clean Marker Brush V-Series Pickling, passivating, marking, and blasting of stainless steel. Model: Brush-V1 Power Supply: 380 VA or 500 VA Operating Voltage: Pjdpfx Akeyk Dthsfogk 230V, 50/60 Hz Protection Class: IP 23 Dimensions (WxHxD in mm): 145 x 250 x 330 Weight: 8 kg Article Number 380 VA: 3150015 Article Number 500 VA: on request Also available as POWER version with 500 VA! - Maximum cleaning efficiency at lowest active agent concentration - Significantly reduces susceptibility to corrosion of treated workpieces compared to similar standard market processes - Minimal or no physiological impact during use - Environmentally friendly, fast, and colour-consistent pickling and passivation of weld seams on stainless steel components Suitable for brush and electrode attachments What materials can be marked? - Steel - Stainless steel - Carbide - Aluminium - Brass - Copper - Zinc - Chrome-plated and nickel-plated surfaces What can the marking be used for? Marking of company logos, type designations, dimensions, manufacturing data, serial numbers, inspection marks, barcodes, assembly and installation instructions, graphics, trademarks, nameplates, equipment numbers, scales, fonts, ... - Dark marking - Easy to use - Works in seconds - Permanent and precise inscription - Removable stainless steel contact plate

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions Pedpfx Ajffv Tpokfsgk - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter Psdpfx Aksb Dxnwefegk 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,000 mm, total width: 2,100 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray stand 2x2.1x2.2 The overspray during powdering is collected via the suction unit. The powder spray stand is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. Pgedofhv Tqspfx Akfjk 1 Dimensions of the powder stand Width 2,000 mm Depth 2,100 mm Height 2,200 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter

Condition: new, Year of construction: 2026, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. Pgsdjffwfxspfx Akfek - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: new, Year of construction: 2026, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz Pgsdpfofhv Tcsx Akfsk 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Condition: new, Year of construction: 2026, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] 4 Substructure Steel profile Pgsdpfefhv Tlsx Akfek 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection

Condition: new, Year of construction: 2026, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Pgsdpfxjulwg Ns Akfjk Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Psdpfxoum Uflj Akfsgk Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: new, Year of construction: 2026, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” Pgodpsbqk Nbsfx Akfok - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status Pgjdpfx Ajwkpvvjkfek - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg