Used notching machines with fixed angle over 4mm for sale (20)

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Dcsdpfx Agod Ab Iceksd Hydraulic drive, 6 mm at 90° (fixed) Blade length: 200 mm Notching angle: 90°

Condition: used, Year of construction: 1999, plate thickness 3-4 mm pressure 0 t Cutting length 220 mm table height 900 mm quantity of oil 35 l Table dimensions 950 x 790 mm total power requirement 4 kW Dcedsynbczopfx Agkod weight of the machine ca. 0,95 t dimensions of the machine ca. 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° automatic cutting gap adjustment

Condition: used, Year of construction: 1983, plate thickness 4 mm blade length 220 mm pressure 0 t weight of the machine ca. 1,5 t Dcodpfx Ageynbcuoked dimensions of the machine ca. 1,6 x 1,7 x 1,6 m total power requirement 2,5 kW Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert.

Condition: as good as new (ex-display), Year of construction: 2026, Demonstration machine. Like new. The machine is fully equipped with: - large, comfortable table - Inside fence with adjustment scale and quick adjustment for cutting strips. - 4 locking precision stops with sliding and interchangeable stop bars 500 mm long. - 2 left and 2 right T-slots parallel to the blades - Plexiglass protection for clear notching - Lift release with freely movable foot pedal - Three stroke types: set-up stroke, single stroke and continuous stroke - 1 front cross stop system consisting of T-slot and scale - 1 left and 1 right scale, parallel to the knives - 1 left and 1 right guide rail for notching magnification over 225 mm - 2 hold-down devices Two stations: Station 1 Disengage: cutting capacity: - 225 x 225 x 6mm in ST 45 - 225 x 225 x 4mm in stainless steel Dcjdpjfhw N Isfx Agkjd Station 2 punching with trump tool and/or cutting in thirty degrees max 4mm St45 max 3mm stainless steel Throat: max. 100mm

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm Dodpfxju Icq To Agkecd stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) *

Condition: used, Year of construction: 1997, plate thickness 6 mm pressure 18 t blade length 220 mm angle adjustable from - to 90 Grad Dedpfxoynnkxj Agkscd table surface area 1100 x 950 mm chamfer lenght 835 mm weight of the machine ca. 1,1 t dimensions 1,2 x 0,8 x 1,4 m Combination machine: edging and notching - foot switch - Emergency stop switch

Condition: good (used), Year of construction: 1988, machine/vehicle number: 803, Offer 26019 Hydraulic Universal Two-Station Sheet Metal Notching Machine + Bending Station Technical Data: Station 1: - Cutting length up to: 225 mm - Cutting thickness: - Steel with 400 N/mm² strength: 8 mm Dcsdpfsyli Utsx Agkod - Stainless steel with 600 N/mm² strength: 6 mm - Cutting angle: 90° - Stroke: up to 25 mm - Strokes per minute: 50 1/min - Table support area with T-slots and depth stops: 320 x 800 mm - Table height: approx. 900 mm Station 2: - Bending or pressing station, pressing force: 12.5 t - Throat depth: 150 mm - Stroke approx.: up to 25 mm - Drive: 400 V / 4 kW - Electric foot switch - Required floor space approx.: W 1000 x H 1250 x D 1200 mm - Weight approx.: 1550 kg

Condition: used, Year of construction: 1988, Year ca. 1988 plate thickness bei Stahl max. 3,3 mm table: 1100 x 700 weight 1 t Dimensions (L/W/H) 1,50 x 1,30 x 1,40 mm drive hydraulisch +++++ Please note: Dedpfjx U A E Sex Agkecd The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Dcodoxaadmopfx Agksd This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 weight 630 kg range L-W-H 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover Dcjdpfexcux Dex Agkod - Foot pedal with emergency stop

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 8700 € 167.91 € 250 mm 6 mm 3 mm 25 1/min 90 ° 4 kW 950 mm 780 mm 1115 mm Dcodpowiqlvjfx Agked 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: ready for operation (used), Hydraulic fixed angle notching machine COMA CA MOD. CHP 260. Two workstations: notching machine + punching machine. Dcjdpfewhpg Ajx Agked Blade length: 260 mm. Work surface: 850 x 700 mm. Workable thickness: 6 mm No. 4 blank holder pistons. Punching: Power T 14 Weight: 1300 kg Use and maintenance manual.

Condition: used, Year of construction: 2003, sheet thickness: 6messurements (LxWxH): 900 x 900 x 1150weight approx.: 850 Dedpfxsv Ncn Rs Agkscd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, cutting force: 250 t, sheet thickness (max.): 6 mm, cutting length (max.): 220 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 6 mm Pressure: 250 t Blade length: 220 mm Stroke length: 24 - 26 mm Dcsdpfx Aewf It Aogkod Ram stroke: max. 32 mm MACHINE DETAILS Machine weight: 1,600 kg

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm Dsdjg Ip Efspfx Agkscd voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: good (used), Used notching machine from Euromac Type: 250 4 s Dcedpswprmhofx Agkod Capacity: 250 x 250 x 4 mm

Condition: as good as new (ex-display), Year of construction: 2024, Boschert Notching Machine LB13 Punching Type LB13 Punching/Trunk Cutting capacity 6 mm St40/ 4 mm V2A Dedpfx Aohp N Ryogkscd Inner stop for cutting strips. Station 2 punching with Trumpf tool system Punching diameter max 76 mm throat 150 mm Punching force approx 15 tons with active stripper system Prefeeding machine year 2022

Year of construction: 2023, condition: as good as new (ex-display), Notching machine Boschert LB12/6 Machine colour blue Ral 5017 Cutting angle 90 Cutting capacity 6 mm St42 4 mm stainless steel Connected load 4kW Weight 800 kg Dcodpfob Raddex Agksd Machine equipped with 2 stops with movable stop bar 300 mm inner stop for cutting strips up to 225 mm 2 movable hold downs plexi protection CE and new machine guarantee

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm Dcodpsu Rartefx Agksd - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: new, - Capacity 250 x 8 mm - Hydraulic - Foot control - Central lubrication system Dcedpfjnwlptsx Agksd - Emergency stop - Documentation - 400V