Second-hand machinery for sale (2,00,000)

Condition: used, Year of construction: 2015, The ABB IRB 5400 is a highly specialized industrial robot series designed specifically for high-precision paint processes. 1. Core Design and "Hollow Wrist" Technology Godpfx Afey Alrdj Aebl The hallmark of the IRB 5400 is its Hollow Wrist (HW). Unlike standard robots where hoses are strapped to the outside of the arm, the IRB 5400 routes all paint and air hoses through the center of the wrist. Benefit: This eliminates "hose whip," prevents the hoses from snagging on parts, and significantly reduces the risk of paint contamination caused by debris falling from external cables. Precision: It allows for a very compact and clean workspace, enabling the robot to reach into tight interior spaces like car cabins or engine bays. 2. Integrated Process Solution (IPS) The 2015-era IRB 5400 units typically utilize ABB’s Integrated Process System (IPS). This technology synchronizes the robot’s motion with the paint dosing and air regulation. Paint Savings: IPS provides ultra-fast response times for starting and stopping the paint flow, which minimizes overspray and reduces material waste. Uniformity: It ensures a consistent film thickness, even as the robot changes speed around complex curves.

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 6,306 h, machine/vehicle number: A3L135221, USED BOBCAT SKID LOADER IN WORKIN G CONDITION MODEL : S150 Gedpjyzdixjfx Af Aobl SERIAL : A3L135221 YEAR : 2009 HOUR : 6306

Condition: used, Year of construction: 2019, Staubli TX60 with working station. Used for 3D printing. Gbsdjy Af E Dopfx Af Asl The TX60 is designed for high-speed, small-payload applications where floor space is at a premium.Payload (Nominal): 3.5 kgPayload (Maximum): 9 kgReach: 670 mmRepeatability: $\pm 0.02$ mmWeight: Approximately 51 kgMounting Options: Floor, Wall, or Ceiling.

Condition: reconditioned (used), functionality: fully functional, The machine is retrofitted and modernized in 2025. The modernisation consists of adding the automatic infeed and auto cycle functions. Dimensions Grinding Wheel (OD x ID x width) Ø 350 x Ø 127 x 100 mm Grinding wheel width 100 mm Ø min / max to rectify 1.5 / 50 mm No. infinite grinding wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/250 rpm Infeed : Auto Auto cycle : Yes Dressing : Manual Dimensions Regulating Wheel (OD x ID x width) Ø 230 x Ø 76.2 x 100 mm Regulating wheel width 100 mm Maximum length to be rectified in plongeé 200 mm Length 1800 mm Width 1300 mm Godpovtl Rpjfx Af Ajbl High 1600 mm Weight 2000 Kg Accessories: New Coolant tank with paper filtration system

Condition: used, Year of construction: 2014, Fanuc M-710iC/50 with R-30iB The Fanuc M-710iC/50 is a medium-payload, multi-purpose industrial robot designed for high-speed performance and versatility. When paired with the R-30iB controller, it provides a robust solution for applications ranging from material handling to machine tending and polishing. Specification,Details Controlled Axes,6 Max Reach,2050 mm Max Payload,50 kg Weight (Arm),Approx. 560 kg Motion Range (J1),360° Max Speed (J1),175°/s Common Applications Material Removal: Grinding, deburring, and polishing. Machine Tending: Loading and unloading CNC machines or injection molding presses. Gbodsyz Rfajpfx Af Asl Palletizing: Handling boxes or bags within its 50 kg weight limit. Assembly: Precise part placement in automotive or general manufacturing lines.

Condition: refurbished (used), Year of construction: 2018, The Stäubli TX90L is a high-performance, 6-axis industrial robot known for its exceptional precision, rigid structure, and versatility in demanding environments. As the "Long" version of the TX90 series, it extends the reach while maintaining the slim, enclosed design characteristic of Stäubli robots. The TX90L is designed to balance a medium payload with an extended work envelope. Reach: 1200 mm (compared to 1000 mm on the standard TX90). Payload: Nominal 6 kg (Maximum capacity up to 15 kg depending on the center of gravity). Repeatability: ± 0.035 mm (One of the highest precision ratings in its class). Degree of Freedom: 6 Axes. Weight: Approximately 114 kg. Gbsdoyz H Idepfx Af Aol Mounting: Floor, Wall, or Ceiling (highly flexible for tight spaces).

Condition: new, fuel tank capacity: 100 l, Year of construction: 2024, = Additional options and accessories = - Sun visor = Remarks = Model description: MITSUBISHI CANTER 4.2D 3-TON S/CAB DUMP TRUCK MY2024 Light Duty Code Diesel Gbsdpfow Dupnjx Af Asl Max Output (HP/kw): 4200 CC, 120 PS @ 3200 RPM Max Torque (Nm/mkg): 31 KGM@ 1600 RPM GEAR BOX: SINGLE REDUCTION HYPOID GEAR CLUTCH: HYDRAULIC CONTROL, DIAPHRAGM SPRING, SINGLE DRY PLATE SERVICE BRAKE: HYDRAULIC WITH VACUUM SERVO ASSISTANCE DUAL CIRCUIT PARKING BRAKE: INTERNAL EXPANDING TYPE ON PROPELLER SHAFT AT REAR OF TRANSMISSION EXHAUST BRAKE: VACCUM OPERATED BUTTERFLY VALVE TYPE AXLES: FULL FLOATING TYPE DIMESNSION: (LXWXH) 4.99 X 2.09 X 2.21 TIRE: 7.50R16 ALTERNATOR: 24 VOLT, 50 AMP Gearbox type: 5 FORWARD + 1 REVERSE SPEED, 2ND TO 5TH SYNCHROMESH, 1ST AND REV. CONSTANTMESH GEAR AM/FM RADIO & CD STEREO WITH AUX/USB INPUT CARD & CUP HOLDER MULTI POCKET FLOOR CONSOLE VINYL FLOORMAT FLOOR CARPET FABRIC SET & REAR FABRIC SET CIGARETTE LIGHTER LOCAL AUDIO FITTING KIT (ANTENNA 2 SPEAKER HARNESS) SEAT BELTS FOR DRIVER AND PASSENGERS SEAT BELT WARNING LAMP FOR DRIVER COAT HOOK TRAY SEAT BACK TRAY & SEAT BACK POCKET SEMI TRIM HALOGEN HEAD LAMP (24V) LAMINATED WINSHIELD GLASS WINSHIELD WIPERS WITH INTEGRATED WASHERS NOZZLES (WITH INTERMITTANT WIPING) 2 EXTERIOR REAR MIRROR = More information = Number of cylinders: 4 GVW: 6.500 kg

Condition: new, power: 83 kW (112.85 HP), wheelbase: 3,350 mm, fuel tank capacity: 170 l, gearing type: mechanical, number of seats: 3, total length: 6,030 mm, total width: 2,040 mm, total height: 2,210 mm, Year of construction: 2024, Equipment: ABS, air conditioning, power assisted steering, = Additional options and accessories = - Halogen headlights Gjdpfx Afsw Duphj Asbl - Hydraulic power steering - Sun visor - Tachometer = Remarks = Model description: MITSUBISHI CANTER CARGO BODY,170L TANK (4×2) 4.2 TON DIESEL MY24 Light Duty Code Diesel Max Output: 113 PS @ 3200 RPM Max Torque: 31 KGF.M@ 1600 RPM Gear Box: 5 forward + 1 reverse Shipping Dimension: 6.15 X 2.20 X 2.2 m (LXWxH) Brakes: Exhaust brake Cargo Body Size: 4.3 X 2.18 X .038 m ( LXWXH) Tire: 7.50R16 119/117 Battery: 25 Volt, Regulated control - 12 Volt X2 Tool set & Jack Fabric seat Interior Rear View Mirror Antenna 2 Speakers Harness Floor Console Cup Holder Halogen head lamps Reverse warning buzzer Water separator in fuel line LED Room Lamp Cigeratte Lighter Silvered Color Wheel Laminated wind shield glass Vinyl Floor Mats Tilt & Telescope Steering Wheel Speed Indicator Warning = More information = Empty weight: 2.305 kg Carrying capacity: 4.200 kg GVW: 6.500 kg

Condition: excellent (used), Year of construction: 2017, FANUC LR Mate 200iD Payload 7 kg Reach 717 mm Axes 6 The FANUC LR Mate 200iD is a compact 6 axis robot with the approximate size and reach of a human arm. It combines best-in-class robot weight-load capacity with standard IP67 protection and outstanding FANUC quality. This makes the LR Mate 200iD the best and most reliable mini robot for process automation in many industries. Gbodpfx Afjyzlzcs Ael

Condition: used, cutting height (max.): 200 mm, cutting width (max.): 380 mm, saw blade diameter: 350 mm, total length: 3,000 mm, total width: 2,200 mm, total height: 1,900 mm, overall weight: 5,000 kg, A. COSTA LEOPARD double-shaft wide belt sander, 2x75kW (100hp) Gbjdsy Rzygspfx Af Ael

Condition: used, Year of construction: 2020, FANUC M-10iD/12 Payload 12 kg Reach 1441 mm Axes 6 Fast and compact palletizing Gbjdpfx Afeyzdgqo Ajl With its slim design and small footprint, this model saves precious floor space and is ideally suited to compact cells. And thanks to its speed and 5th axis, it makes a great choice on robotic palletizing applications requiring high rates of throughput and maximum reliability.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm Gbjdpfxjy H Ncbo Af Ael - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm Gbsdpfx Afoww E Nrs Aol (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Gbjdpfxsxlcp Ne Af Ael Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Gbedpfxexhf R Ij Af Ajl Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: used, For sale: MEP PH 261-1HB band saw for metal. The machine is used, in good condition and fully operational. Inspection and testing on site is possible. The MEP PH 261-1HB is a professional manual gravity band saw for metal, designed for cutting tubes, profiles, and solid materials. The HB system enables automatic descent cutting without operator intervention. Gbedpfsy R Sgwex Af Ael Specifications: Model: MEP PH 261-1HB Mitre cutting range: 0° to +60° Cutting capacities: 0° – Ø225 mm, 200 x 200 mm, 240 x 160 mm +45° – Ø160 mm, 140 x 140 mm, 155 x 115 mm +60° – Ø90 mm, 90 x 90 mm Maximum vise opening: 245 mm Blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 46 / 92 m/min Motor power: 0.94 / 1.1 kW Working table height: 950 mm Machine weight: approx. 240 kg Cast iron construction for reduced vibration and increased cutting precision Quick mitre adjustment Suitable for cutting steel, stainless steel, aluminium, and other metals For more information: MEP PH 261-1HB Professional Italian machine for workshops, production, and metalworking companies. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2013, functionality: fully functional, Mobile valve machining / turning machine Unigrind FDA 500 for sale. The machine is used, in good condition and fully operational. Inspection and testing on site are possible. The Unigrind FDA 500 is designed for machining and repair of valve sealing surfaces, seats, and flanges. The equipment allows precise turning, milling, and surface refurbishment directly at the worksite. Specification: Gbedpey R R Imefx Af Asl Model: Unigrind FDA 500 Year: 2013 Mobile valve machining machine Suitable for repair of valves, flanges, and sealing surfaces Accurate machining of flat and conical surfaces Fits various types of industrial valves Compact and robust design Professional industrial equipment German quality More info: Unigrind FDA 500 Suitable for energy, oil, gas, chemical, and industrial companies as well as repair workshops. If you have further questions, we will be happy to assist you.

Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table. The equipment is in good condition and fully operational. Inspection and testing on site are possible. The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components. Specification: Model: Unigrind KSM600 Stationary flat surface grinding/lapping table Intended for machining flat sealing surfaces Gjdpfxsy R Rl Se Af Aobl Suitable for valve, gate, and flange repair Robust industrial housing Stable and precise processing Simple and user-friendly operation Professional industrial equipment More information: Unigrind KSM600 Suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. Gjdpfx Aey R N A Asf Asbl EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Condition: used, operating hours: 638 h, High-pressure air/nitrogen compressor for sale – EFCO Maschinenbau GmbH BOE 100/200 booster. The compressor is used, fully operational. Currently connected – inspection and testing on site are possible. Designed for compressing air or nitrogen up to a pressure of 200 bar. Suitable for pressure testing, industrial processes, valve testing systems, and other high-pressure applications. Gbedsy R Nnrjpfx Af Asl Specifications: Model: EFCO BOE 100/200 Maximum working pressure: 200 bar Tank capacity: 2 x 50 l (100 l total) Electric drive – 400 VAC Suitable for air and nitrogen compression Automatic shutdown upon reaching maximum pressure Automatic start when pressure drops Simple and convenient operation Filling time from 0 to 200 bar (2900 psi): approx. 2.5 hours Operating hours: 638 h German-made, professional, industrial-grade equipment. If you have further questions, we will be happy to answer them.

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool Gsdpfx Afjx Rkvqo Aebl ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Year of construction: 2026, condition: new, functionality: fully functional, DN Solutions PUMA DNT2600M Type: CNC Turning Center (Live Tooling) Control Unit: Fanuc Chuck Size: 10 Inch with C-Axis Godpfx Aey R E Stsf Aobl Bar Capacity: 81 mm Max. Turning Diameter: 380 mm Max. Turning Length: 610 mm X-Axis Travel: 260 mm Z-Axis Travel: 658–680 mm Spindle Speed: 3500 rpm Spindle Power: 22–26 kW Max. Torque: 327–735 Nm Turret Capacity: 12 Stations Live Tool Speed: 6000 rpm

Year of construction: 2023, condition: new, Pressing force 150to Siemens PLC hydraulics Bosch/Rexroth stroke 400mm table area 600mm x 800mm Gedpfxjkyu Hve Af Aobl

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, TBA19 model 2000 Made full overall maintanence 2025 7500 pack/hour 200 slim Easy rider Straw applicator Carton packer All conveyours Gedpfxey Iyc Io Af Ajbl In perfect and running condition

Condition: used, Year of construction: 2010, HORIZON VAC-100a + 4x VAC-100m + ST-40 (2010, Used) Gbsdey Rixqspfx Af Aol 1. Configuration VAC-100a Air Suction Collator Tower × 1 VAC-100m Air Suction Collator Tower × 4 ST-40 Stacker × 1 Language: English Interface Total Stations: 50 Bins 2. Specifications VAC-100 Series Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 120 × 148 mm Paper Weight Range: 40 ~ 250 gsm Bin Capacity: 55 mm per station Power Requirement: 230V / 60Hz Feeding System: Air Suction System ST-40 Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 182 × 128 mm Stacking Capacity: Approx. 360 mm