Used Plantec Uk 400 Ha for sale (31,031)

Condition: excellent (used), For sale: SEW-Eurodrive R40DT71K2Z gearbox with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. Normal signs of wear and tear from use are visible, but these do not affect its performance. Technical specifications: Isdpfx Aszm Sq Sjcheba Manufacturer: SEW-Eurodrive Model: R40DT71K2Z Rated power: 0.25 kW Power supply: 230/400 V (Δ/Y), 3-phase Frequency: 50 Hz Motor speed: 2500 rpm Output shaft speed: 39 rpm Rated current: 1.60 / 0.93 A Protection class: IP54 Insulation class: F Mounting method: IM B6 Weight: 16.14 kg Power factor (cos φ): 0.85 Lubrication: CLP220 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear from use, which do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y), 3-phase Frequency: 50 Hz Motor speed: 1380 rpm Output shaft speed: 77 rpm Torque: 54 Nm Isdezm Sd Espfx Achoba Gear ratio: i = 17.55 : 1 Rated current: 3.05 / 1.75 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 17.38 kg Power factor (cos φ): 0.77 Lubrication: CLP680 Country of origin: Germany

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. Normal signs of use resulting from operation are visible, but they do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Isdpfjzm R Aysx Achoba Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y) Motor: 3-phase Frequency: 50 Hz Motor speed: 1360 rpm Output shaft speed: 77 rpm Rated current: 3.05 / 1.76 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 16.15 kg Power factor (cos φ): 0.77 Country of manufacture: Germany

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Ibsdpjzmy Sdofx Achja Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  - Output: up to approx. 35 cans per minute (depending on product) - Formats: 330 ml & 440 ml standard cans (202) - Filling system: 6-head filler - Closure: double seam seamer for 202 ends - Voltage / power supply: not specified - Special features: Ibjdowzb Irspfx Achsa - Retrofitted rinser and dryer (Vigo UK) - Pneumatics converted to metric connections - Original operating instructions available Scope of delivery  - 1 × Can filling line | ABE | CraftCan35 | 2017 - Incl. rinser and dryer (retrofitted) - Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt - Some acrylic protective cladding (some replacement required)

Condition: used, Year of construction: 2006, diameter / mm Ibodpfjy Suumox Achea Cutting (quantity) / weight / kg

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Ijdpfxexn Aage Achoba

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Ibjdjua E Txopfx Achsa

Condition: used, mileage: 12,345 km, first registration: 11/2000, Year of construction: 2000, Haller X2 .20 m3 garbage box for Cable system Container pick up Zoeller 380.00 = Further information = Iodpowwtigefx Achsba Please contact Gerrit Haverhoek for more information.

Condition: excellent (used), mileage: 2,46,000 km, power: 412 kW (560.16 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: crane, electric window regulation, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Leather interior - Leather upholstery - Air suspension - Air-suspended seats - Reversing camera - Sun visor - Automatic heating system - Xenon lighting - Power take-off (PTO) - Tow coupling Ibsdpfex Ttuzox Achea = Additional Information = Axle Configuration Front axle 1: Steering Rear axle 1: Lift axle; Steering Weights Kerb weight: 18,470 kg Payload: 13,530 kg Gross vehicle weight (GVW): 32,000 kg Functionality Crane: Palfinger PK 34002-SH F, year of manufacture 2016, mounted behind cab Cab Interior Upholstery: Leather Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Iedpfx Acszmr D Eeheba The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Heidenhain / zentro-elektrik VSNT 400 / 8610-1 Power Supply SN:100647, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Ibsdpfx Acsx Err Njhsa

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: galvanized Manufacturer: SSI Schäfer Type: PR350/400 Overall length: approx. 340 mm Clear width (shelf spacing): approx. 257 mm Hole diameter: approx. 25 x 10 mm Ijdpoir U Trjfx Achsba Profile dimensions: approx. U 80 x 50 mm Weight/piece: approx. 1.52 kg

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, clint chiller for water cooling Ijdpfxet Nhdtj Achoba

Condition: used, Year of construction: 2007, operating hours: 5,365 h, machine/vehicle number: Robot: 764202 / Controller: 48205, overall weight: 1,260 kg, load capacity: 30 kg, arm reach: 2,033 mm, The KUKA industrial robot is a pre-owned and tested robotic system fitted with a KRC2 ed05 controller. Manufactured in 2007, the robot has 5365.45 operating hours. It is suited for tasks such as material handling, assembly, automation, and high-precision machining processes. With a payload capacity of 30 kg and a reach of 2033 mm, it is ideal for medium-load applications. The delivery package includes a KUKA rotary-tilt positioner DKP 400.1, a KUKA control panel, and a complete set of cables. Ibedpfx Acjy Nficshsa

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area Ibedpfjyxq A Hsx Achja 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 16,000 mm, The centerpiece is a KITZINGER contino 400/2 KLT continuous container washing system, commissioned in 2019, complete with an associated reverse osmosis system. In addition, there is a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system, three modern forklifts, and packaging and securing technology. All systems are ready for operation and will be delivered ex-works from Kerpen. CLEARANCE SALE — COMPLETE PACKAGE OR INDIVIDUAL SYSTEMS Acquisition possible as a complete package or in individual lots. Lease of the KITZINGER system fully paid off — direct transfer of ownership. High-quality brand components (LENZE, EDUR, ELEKTROR, SIEMENS) — attractive resale value. Ex-works (EXW) — dismantling and transport to be organized by the buyer. Complete technical documentation and maintenance history are available. System I — KITZINGER contino 400/2 KLT container washing system Industrial continuous container washing system designed for service providers, with three active washing zones, rinsing, and a heated drying section. The entire machine, which is 16.2 m long, features a high-quality stainless steel construction with double-walled sound and thermal insulation. Manufacturer / Type: KITZINGER Maschinenbau GmbH · contino 400/2 KLT Year of manufacture / Status: 2016 · ready for operation Machine length: 16,200 mm · straight line, zones arranged one behind the other Tunnel dimensions: Width 410 mm × Height 410 mm · passage width 160–410 mm Hourly output: 200–300 containers (60/40) and 200–300 lids Connection: 400 V / 50 Hz / 140 kW (2 control cabinets) Sound emission: ≤ 85 dB(A) in accordance with BGN specifications Premium components (brand-specific — attractive for resale) ▸ LENZE drive system and frequency converters for all zones ▸ EDUR stainless steel centrifugal pumps — Zone 1: 4 kW · Zone 2: 5.5 kW · Rinsing zone: 4 kW ▸ ELEKTROR fan motors — BS2: 2 × 5 kW · BS3H: 3 × 5 kW with 15 kW additional heating Iedpfszazk Nsx Achoba ▸ SIEMENS control cabinet components in both control cabinets ▸ POLO band skimmers in washing zone 1 and washing zone 2 Three washing zones plus rinsing and drying section Infeed zone 2,000 mm: Stainless steel belts with cams · adjustable side guides · vapor hood Washing zone 1 (2,700 mm): External filter tank 1,000 l · heater 20 kW · 55 °C · 1,500 l/min 1.5 bar Washing zone 2 (2,700 mm): External filter tank 800 l · heater 30 kW · 60 °C · 1,500 l/min 2 bar Rinsing zone 3 (1,800 mm): External filter tank 400 l · heater 40 kW · 65 °C · fresh water cascade Blow-off BS2 (1,800 mm): 2 × ELEKTROR 5 kW · adjustable stainless steel air knives Blow-off BS3H (2,700 mm): 3 × ELEKTROR 5 kW · electric additional heating 15 kW Neutral drain zone: 500 mm with suction port Special features: Completely double-walled insulated · nozzle arms can be removed without tools System II — Filter systems / Reverse osmosis Reverse osmosis water treatment system, which significantly reduces the fresh water volume and feeds it into the closed circuit of the three washing zones. Manufacturer / Type: TopWater 401/1000 — Reverse osmosis system Year of manufacture / Status: 2022 · ready for operation Function: Water treatment, reduction of fresh water consumption In addition, a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system in an SPF cart version is available for the intensive cleaning of smaller and heavily soiled parts. Manufacturer / Type: PERKUTE · RC 122 (Clean-O-Mat SPF cart) Machine no. / Year of manufacture: S 1993 · 2008 Connection: 400 V / 50 Hz · 2

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Iedpfx Aeh Hvk Ajcheba Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: used, Technical details: Ijdpfx Asxraxhjcheba hydraulic pump: 380 V 50 Hz 0,85 kW weight of the machine ca.: 56 kg dimensions of the machine ca.: 600 x 400 x 650 mm max. working pressure: 400 bar cycle time : 1-60 per min. control voltage: 24 V

Condition: good (used), Year of construction: 2005, This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. Iedpfergplxox Achsba – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Ibjdpfx Acoyhnukjhja Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: excellent (used), For sale: Geared motor from the renowned German manufacturer KEB Antriebstechnik. Robust industrial design intended for continuous operation in demanding conditions. Ijdpfx Aoywaq Dechsba The unit delivers high torque at low speed, ideal for machinery, conveyors, feeders, and industrial applications. Technical data Manufacturer: KEB Antriebstechnik Model: ZG 2 KPR 71 G 6 TS 140 G 92 Power: 0.55 kW Output speed: approximately 20 rpm Torque: 259 Nm Voltage: 230/400 V Frequency: 50 Hz Protection rating: IP55 Mounting type: B3 foot-mounted Weight: approximately 26 kg Dimensions Shaft diameter: approximately 30 mm Shaft length: approximately 60 mm Condition Used Technically fully functional Visible signs of use and surface rust on the shaft Visual condition as per photos

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Technical specifications: Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Isdpfx Aeyvadmochjba Possible minor signs of storage

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Frequency: 50 Hz Speed: approx. 950 rpm Protection class: IP55 Insulation class: F Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE. Ijdpfxeyridbj Acheba

Condition: new, ///// PRICE QUOTED PER 1 UNIT ///// For sale: new submersible pump Wilo EMU KS15 – a professional device from the renowned German manufacturer Wilo. The pump is designed for operation in demanding conditions – ideal for dewatering, pumping stations, and industrial applications. The equipment is brand new, complete with documentation and accessories shown in the photos. ⚙️ Technical specifications: Manufacturer: Wilo (Germany) Model: EMU KS15 Power supply: 3~400V / 50 Hz Power: 1.30 kW Current: 3.15 A Degree of protection: IP68 (typical for submersible pumps) Max. delivery head: up to 12.5 m Connection: G2 / PN10 Catalogue number: 6019450 🛠️ Features: Submersible pump for clean and slightly contaminated water Robust industrial construction High performance and reliability Designed for continuous operation Compact and easy to install Set includes quick coupling / elbow and controller (start/stop function) 📦 Condition: 🆕 New – unused ✔️ Comes with original documentation ✔️ In stock and ready for dispatch 📦 Included in the set: Wilo EMU KS15 pump Power cable Control unit (switch) Connection / elbow fitting Operating manual Isdpfx Aeyz Dvlochsba 📌 Applications: Dewatering of excavations Construction Industry Agriculture Pumping stations