Used Amada Hfb 100 for sale (23,009)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Gbjdpfxjw Iq Uge Af Ajl Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 1998, operating hours: 80,162 h, pressing force: 51 t, stroke length: 200 mm, controller manufacturer: AMADA, controller model: Operateur, number of axes: 8, This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details. • Stroke: approx. 200 mm • CNC control: OP-2 CNC • Controlled axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Open height: approx. 480 mm • Throat depth (frame throat/gap): approx. 400 mm • Distance between uprights: approx. 1,665–1,690 mm • Table width (bottom beam width): 60 mm • Working height (table height from floor): 910 mm Gsdpfx Aey Alvpof Aebl • Max. hydraulic pressure: 270 bar • Number of cycles: 4 cycles/min (at nominal conditions) • Main motor power: 4.5 kW Technical Specification Bending Length 2090 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, operating hours: 70,104 h, pressing force: 81 t, total length: 3,100 mm, total width: 2,180 mm, total height: 2,540 mm, overall weight: 5,750 kg, working width: 2,550 mm, Equipment: emergency stop, We offer this ready-to-use Amada HFBO 80-25 press brake, year of manufacture 1999. If you have any questions or need further information, please feel free to send us a message or give us a call. Godpfxsy H Eqbo Af Asbl The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2006, operating hours: 17,250 h, condition: used, Empty weight: 7.500 kg Dimensions (LxBxH): 370 x 170 x 265 cm Selling price: CHF 2.700 (excl. BTW) Serial number: HFBO 125 30 H970202 Press Capacity: 125 tons (~1,250 kN) Table length: 3140mm Table width: 90mm Work service height: 960mm Inlet: 450mm Cylinders stroke: 180mm Year of construction: 1997 Working hours: 17.250 hours Total dimensions LxWxH: 3700x1700x2650mm Own weight: 7500kg Please note ; without tooling Gedpfx Aey Ewmref Aebl Additional (mandatory) costs apply for dismantling, crane & loading. Online auction of the surplus sheet metalworking machines, aluminium sheet stock and welding tools (e.g. RAS, AMADA press brakes, SUHNER, MIG MAG ESAB, TRM fiber laser welding etc.) following the outsourcing and decommissioning of the metal and welding workshop in Illnau-Effretikon (near Zurich) in Switzerland. The online auction opens Thursday 16 April and closes Thursday 21 May. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 19 May Pickup days are on: - Tuesday 2 June - Wednesday 3 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 1998, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 470 mm Gsdpfxjyw Tl Us Af Ajbl C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 150 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec opening speed 0-10 mm/sec Number of working hours 8500 h length 3600 mm width 1900 mm height 2600 mm weight 6750 kg total power requirement 9 kW dimensions of the machine ca. 4x2x3 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 1999, pressure 100 t chamfer lenght 3100 mm Gedpfxjyw Tl Ie Af Asbl distance between columns 2750 mm Stroke beam 180 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 120 mm Z1+Z2 axes controlled by cnc 300-2700 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 29000 h length 3500 mm width 1950 mm height 2550 mm weight 6700 kg total power requirement 8 kW dimensions of the machine ca. 4x2x2,5 m Control CNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Gbodpfx Aeynbfvef Asl Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: used, stroke length: 30 mm, overall weight: 10,500 kg, bending force (max.): 170 t, control type: CNC control, degree of automation: automatic, AMADA Promecam HFB Press Brake — 1700 kN / 3000 mm For sale: Heavy-duty hydraulic press brake for industrial use, in very good working condition. Gbjdoywr R Ajpfx Af Aol Machine details: Manufacturer: Amada Promecam (France) Model: HFB Year of manufacture: 1991 Technical specifications: Press force: 1700 kN (170 tons) Maximum stroke: 130 mm Input voltage: 380 V / 50 Hz, 3-phase Installed power: 13 kW Nominal current: 27 A Weight: 10,500 kg Control system: Delem DA 58 graphical CNC controller Additional information: The machine is equipped with a full air bending capacity chart mounted directly on the machine body. Tooling included. This press brake has been in regular production use and is in full working order. For further information and inquiries, please contact us by email or phone. Available for collection by arrangement.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm Gjdpfeyk Dc Nex Af Aebl • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm Gbjdpfeyxvgqjx Af Ajl NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, AMADA - HFBO 125-4 - 1998 - 8 controlled axis Gsdpfx Aeyl Svmof Aobl - 125 t - table 4000 mm - crowning - including many tools - hours 44410

Condition: used, functionality: fully functional, Press brake Amada Promecam 100t 3000mm Axes X,Y after retrofitting 2025 Gbsdpjx H A Dfofx Af Ajl

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm Gbodpjxvitvofx Af Ael coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, pressing force: 170 t, working width: 3,100 mm, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II NO OF AXIS 8 INCLUDING Z1 AND Z 2 BENDING LENGTH 3100mm OPEN HEIGHT 450 STROKE LENGTH 180 Gedpfev Iftgjx Af Asbl THROAT DEPTH 410 MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED WEIGHT 11 TONS

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) Gbsdpjxabnyjfx Af Ajl - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Gbodpfxsyi Updo Af Asl Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge Stroke: 400 mm automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system Gbedpfx Afjyi Ud Uo Aol lateral movable safety fences LAN network operation infrared light curtain at the front and rear Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, stroke length: 350 mm, controller model: Amada Operator, bending force (max.): 320 t, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg Gedpfx Afjxwnxtj Aobl EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS Gbjdemkhynepfx Af Asl pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm MACHINE DETAILS weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: Gbsdpfxevrh Rcj Af Asl The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Gjdpfx Ast Hg Acjf Aebl Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Gbjdpfx Afjy Rrhbj Asl Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use For demo only, like new Gbodpsyunphsfx Af Asl 1) Amada TP45FX 2) PATEC 110ton press with recoiler

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm Gedpeyxtf Refx Af Asbl - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Godpfxow Rr A Dj Af Asbl