Hydr. pressbrake
AMADA HFBO 80-25

Name: AMADA HFBO 80-25
Brand: AMADA
Availability: InStock

Year of construction

1996

Condition

Used

Location

Ahaus

Show map

Machine data

Machine type:: Hydr. pressbrake

Manufacturer:: AMADA

Model:: HFBO 80-25

Year of construction:: 1996

Condition:: ready for operation (used)

Price & Location

Location:: 48683 Ahaus

Call

Details about the offer

Listing ID:: A19924340

Reference number:: 1125-9308444

Update:: 18.09.2025

Description

pressure 80.0 t
chamfer lenght 2550 mm
distance between columns 2130 mm
column arm 420 mm
ajustment speed 100 mm/sec
working feed 10.0 mm/sec
return speed 80.0 mm/sec
stroke 200 mm
dayligth 470 mm
table width 60.0 mm
table height 910 mm
Number of working hours ca. 37.102 h
Gjdjxabnyopfx Ah Hsil
total power requirement 9.0 KW
weight of the machine ca. 5750 kg
range L-W-H 3100 x 2180 x 2540 mm
good / well-maintained condition (!!)

- Inspected condition - Machine video -
?v=fwdjSiQYq_A

Equipment:
- CNC electro-hydraulic press brake
- OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2
- CNC-controlled backgauge adjustment (X-axes)
- CNC-controlled vertical adjustment of the stop fingers (R-axes)
- CNC-controlled left-right adjustment of the stop fingers (Z-axes)
- Freely movable two-hand control & foot switch
- Tool crowning - AMADA type
- Various tools
- CE marking
- Side guards (hinged doors)
- Rear guards (hinged door)
- 2x emergency stop buttons at the front
- Operating instructions

Seller

Registered since: 2011

766 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Press brake AMADA PROMECAM HFBO80-25 2500 x 80 to

Kreuztal

6,929 km

Press brake
AMADA PROMECAMHFBO80-25 2500 x 80 to

Call

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. Giedpfx Ahjvrh Rcj Hjl The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

See details

Listing

Mozé-sur-Louet

7,573 km

Press brake
AMADAHFT 80/25

Call

Listing

Matelica (MC)

6,541 km

Tube Bending Machines
BLM GROUPNCS832

Call

Listing

Laser cutting machine Bystronic BySprint Fiber 3015

Zweibrücken

6,975 km

Laser cutting machine
BystronicBySprint Fiber 3015

Call

Condition: excellent (used), Year of construction: 2014, operating hours: 33,000 h, The automatic sheet metal processing laser system comprises two each of the following: - Bystronic BySprint Fiber 3015 laser cutting machines - Bystronic Fiber 4000 laser sources - Bystronic Bytrans 3015 loading/unloading systems - Donaldson extraction units and one Gjdeun U Rkepfx Ah Hsil - Bystronic storage system Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting area: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 Watts Max. mild steel: 20 mm Max. stainless steel: 15 mm Max. aluminium: 15 mm Location: Zweibrücken Professional dismantling is included in the offer. The machine was regularly serviced by a renowned company, and thanks to a ‘24-hour maintenance contract’, it received more comprehensive parts replacements than strictly required.

See details

Listing

Częstochowa

6,149 km

Press brake
AMADAITPS III

€5,900

fixed price plus VAT

Call

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Gjdpewq Dpqjfx Ah Heil Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

See details

Listing

Kreuztal

6,929 km

Hydr. Press brake
AMADA4100 x 400 to

Call

Condition: excellent (used), Year of construction: 2012, Technical specifications: Gsdpfx Aewl U Rheh Hoil Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

See details

Listing

Thread cutting machine M4-M20 MAXION UNIMAX 3T GL

Böblingen

6,855 km

Thread cutting machine M4-M20
MAXIONUNIMAX 3T GL

Call

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Giodpfjgv I Unox Ah Hjl Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

See details

Listing

Deitingen

6,959 km

Tool grinding machine
W. ScherrerSB 10

€1,500

fixed price plus VAT

Call

Listing

Laser Cutting Machine TRUMPF TrueLaser Cell (TLC) 7040

Germany

6,760 km

Laser Cutting Machine
TRUMPFTrueLaser Cell (TLC) 7040

Call

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room Gjdpfsu N I Ersx Ah Heil - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

See details

Listing

CNC LATHE SCHIESS vertical lathe CNC 25 DSC 200P palettisé 2500mm

France

7,377 km

CNC LATHE
SCHIESS vertical lathe CNC25 DSC 200P palettisé 2500mm

Call

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Giodpfxexpqm Re Ah Hol Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

See details

Advertise here

Hydr. pressbrakeAMADA HFBO 80-25

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Hydr. pressbrake
AMADA HFBO 80-25